Products

SAM40-8

Sensor Acquisition Module, 8 input channels, 40 kHz bandwidth. Must be used with 12-bit HDO scope.


    SAM40


SAM40-8 - Sensor Acquisition Module, 8 input channels, 40 kHz bandwidth. Must be used with 12-bit HDO.
SAM40-16 - Sensor Acquisition Module, 16 input channels, 40 kHz bandwidth. Must be used with 12-bit HDO.
SAM40-24 - Sensor Acquisition Module, 24 input channels, 40 kHz bandwidth. Must be used with 12-bit HDO.
Key Features
  • 8, 16 or 24 input channels
  • 24-bit resolution
  • 40 kHz bandwidth (100 kS/s)
  • Plug-and-play with supported HDO
  • Complete physical units conversion and rescaling

 

24-bit Precision

All channels have 24-bit resolution (stored in 32-bit floating point format) with ~0.05% total accuracy. Built-in filters with settings as low as 100 Hz further reduce noise.

Plug-and-Play

The SAM40 simply connects to the supported Teledyne LeCroy oscilloscope with a USB2.0 cable for data transfer and control/trigger commands, and BNC cables for clock/timebase synchronization. No programming or complex setups are required.

Unit Conversion and Rescaling

More than 65 different SI and English system physical units are supported for length, mass, temperature, angle, velocity, acceleration, volume, force/weight, pressure, electrical, magnetic, energy and rotating machine quantities.

Deep Toolbox

The oscilloscope math, measure, analysis, pass/fail and option packages utilize the sensor inputs the same as any other channel. Teledyne LeCroy's deep toolbox just got even more powerful.

Key Features
  • 8, 16 or 24 input channels
  • 24-bit resolution
  • 40 kHz bandwidth (100 kS/s)
  • Plug-and-play with supported HDO
  • Complete physical units conversion and rescaling
24-bit Precision

All channels have 24-bit resolution (stored in 32-bit floating point format) with ~0.05% total accuracy. Built-in filters with settings as low as 100 Hz further reduce noise.

Plug-and-Play

The SAM40 simply connects to the supported Teledyne LeCroy oscilloscope with a USB2.0 cable for data transfer and control/trigger commands, and BNC cables for clock/timebase synchronization. No programming or complex setups are required.

Unit Conversion and Rescaling

More than 65 different SI and English system physical units are supported for length, mass, temperature, angle, velocity, acceleration, volume, force/weight, pressure, electrical, magnetic, energy and rotating machine quantities.

Deep Toolbox

The oscilloscope math, measure, analysis, pass/fail and option packages utilize the sensor inputs the same as any other channel. Teledyne LeCroy's deep toolbox just got even more powerful.

Vertical - Analog Channels

Analog Bandwidth (Max) 40 kHz
Analog Bandwidth @ 1 MΩ (-3 dB) (BNC Input) 40 kHz
Input Channels 8
Vertical Resolution 24 bits, stored and displayed as 32-bit floating point waveforms
Effective Number of Bits (ENOB) 13 (40 kHz bandwidth), 15 (2 kHz bandwidth)
Vertical Noise Floor (1 mV/div) 31 µVrms
Vertical Noise Floor (2 mV/div) 31 µVrms
Vertical Noise Floor (5 mV/div) 35 µVrms
Vertical Noise Floor (10 mV/div) 35 µVrms
Vertical Noise Floor (20 mV/div) 35 µVrms
Vertical Noise Floor (50 mV/div) 35 µVrms
Vertical Noise Floor (100 mV/div) 35 µVrms
Vertical Noise Floor (200 mV/div) 56 µVrms
Vertical Noise Floor (500 mV/div) 355 µVrms
Vertical Noise Floor (1 V/div) 355 µVrms
Sensitivity 1 mV-10 V/div in 1, 2, 5 steps
DC Vertical Gain Accuracy (Gain Component of DC Accuracy) ±(0.02% of reading + 0.02% F.S. + 100µV) at 23°C ± 5°C. Add ±(0.0015% F.S. + 10µV)/°C outside of stated temperature range.
Channel-Channel Isolation DC-1 kHz: 60 dB (>1000:1),
Maximum Input Voltage 1-40 kHz: 50 dB (>300:1),
Input Coupling (For any two input channels, same v/div settings, typical)
Input Impedance 1-40 kHz: 50 dB (>300:1),
Bandwidth Limiters (For any two input channels, same v/div settings, typical)
Rescaling 1-40 kHz: 50 dB (>300:1),
 

Horizontal - Analog Channels

Acquisition Modes (For any two input channels, same v/div settings, typical)
Clock Accuracy ±50 Vpeak for DC, AC, and GND coupling.
Jitter Between Channels ±24 Vpeak for IEPE coupling (use IEPE coupling with appropriate sensor).
 

Acquisition - Analog Channels

Sample Rate (Single-shot) ±24 Vpeak for IEPE coupling (use IEPE coupling with appropriate sensor).
Memory Length (4 Ch / 2 Ch / 1Ch)
(Number of Segments)
±24 Vpeak for IEPE coupling (use IEPE coupling with appropriate sensor).
Averaging AC 1MΩ, DC 1MΩ, IEPE, GND.
Envelope (Extrema) AC coupling frequency 0.16 Hz ±10%
 

Triggering System

Modes AC coupling frequency 0.16 Hz ±10%
 

Connectivity

Ethernet Port AC coupling frequency 0.16 Hz ±10%
USB Device Port 1 MΩ ± 0.5% || 55 F
 

Probes

Probe System 100 Hz, 500 Hz, 2 kHz, 10 kHz. Implemented as digital IIR filters in FPGA.
Scale Factors Length: meters, inches, feet, yards, miles; Mass: grams, slugs; Temperature: celsius, fahrenheit, kelvin; Angle: radian, arcdegr, arcmin, arcsec, cycles, revolutions, turns; Velocity: m/s, in/s, ft/s, yd/s, miles/s; Acceleration: m/s2, in/s2, ft/s2, g0; Volume: liters, cubic meters, cubic inches, cubic feet, cubic yards; Force (Weight): newton, grain, ounce, pound; Pressure: pascal, bar, atmosphere (technical), atmosphere (standard), torr, psi; Electrical: volts, amps, watts, volt-amperes, volt-amperes reactive, farad, coulomb, ohm, siemen, volt/meter, coulomb/m2, farad/meter, siemen/meter, power factor; Magnetic: weber, tesla, henry, amp/meter, henry/meter; Energy: joule, Btu, calorie; Rotating Machine: radian/second, frequency, revolution/second, revolution/minute, N?m, lb-ft, lb-in, oz-in, watt, horsepower; Other: %.
 

Power Requirements

Voltage Real-time (coincident with and as controlled by a compatible oscilloscope)
Nominal Power Consumption +/-25ppm + 1.0ppm/year from calibration
Max. Power Consumption SAM40-SAM40 Channel: 1µs (maximum)
 

Environmental

Temperature (Operating) Oscilloscope Analog Channel-SAM40 Channel: 10µs (maximum)
Temperature (Non-Operating) Oscilloscope Analog Channel-SAM40 Channel: 10µs (maximum)
Humidity (Operating) Oscilloscope Analog Channel-SAM40 Channel: 10µs (maximum)
Humidity (Non-Operating) 1 S/s to 100 kS/s on all channels
Altitude (Operating) 2.5 Mpts/ch on all channels
Altitude (Non-Operating) Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
Random Vibration (Operating) Envelope, floor, or roof for up to 1 million sweeps
Random Vibration (Non-Operating) Normal, Auto, Single, and Stop when cross-triggered by a supported oscilloscope.
Functional Shock Qty. 1 10/100/1000BaseT Ethernet interface (RJ45 port).
 

Size and Weight

Dimensions (HWD) 1 USBTMC port (USB 2.0)
Weight BNC Input, IEPE/ICP Compatible. Excitation Output Current = 4mA ±15% (23°C ± 5°C, +0.5%/°C outside of range). Compliance Voltage = 24V.
 

Certifications

CE Certification
UL and cUL Listing
Manually selected in supported oscilloscope.
 

Warranty and Service

Warranty and Service 100-240 VAC ±10% at 45-66 Hz; 100-120 VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection.
 

SAM40-8