Products
Mixed Signal Test Solutions

LabMaster 9 Zi-A 13 GHz Systems

13 GHz, 40 GS/s, 4ch, 20 Mpts/Ch LabMaster Slave Acquisition Unit


    LabMaster Acquisition Modules


LabMaster 9 Zi-A Oscilloscopes
LabMaster 913SZi-A - 13 GHz, 40 GS/s, 4ch, 20 Mpts/Ch LabMaster Slave Acquisition Module. 50 Ohm Inputs
LabMaster 916SZi-A - 16 GHz, 40 GS/s, 4ch, 20 Mpts/Ch LabMaster Slave Acquisition Module. 50 Ohm inputs.
LabMaster 920SZi-A - 20 GHz, 40 GS/s, 4ch, 20 Mpts/Ch LabMaster Slave Acquisition Module. 50 Ohm inputs.
LabMaster 930SZi-A - 30 GHz, 80 GS/s, 40 Mpts/Ch Digital Bandwidth Interleaved (DBI) Slave Acquisition Module, 50 ohm Inputs. Also operates in 20 GHz, 40 GS/s, 4ch, 20 Mpts/Ch mode.
LabMaster 10 Zi-A Oscilloscopes
LabMaster 10-20Zi-A - 20 GHz, 80 GS/s, 4ch, 32 Mpts/Ch LabMaster Acquisition Module, 50 Ohm Input
LabMaster 10-25Zi-A - 25 GHz, 80 GS/s, 4ch, 32 Mpts/Ch LabMaster Acquisition Module, 50 Ohm Input
LabMaster 10-30Zi-A - 30 GHz, 80 GS/s, 4ch, 32 Mpts/Ch LabMaster Acquisition Module, 50 Ohm Input
LabMaster 10-36Zi-A - 36 GHz, 80 GS/s, 4ch, 32 Mpts/Ch LabMaster Slave Acquisition Module, 50 Ohm Input
LabMaster 10-50Zi-A - 50 GHz, 160 GS/s, 64 Mpts/Ch Digital Bandwidth Interleaved Acquisition Module, 50 Ohm Input Also operates in 36 GHz, 80 GS/s, 4ch, 32 Mpts/Ch mode.
LabMaster 10-59Zi-A - 59 GHz, 160 GS/s, 64 Mpts/Ch Digital Bandwidth Interleaved Acquisition Module, 50 Ohm Input Also operates in 36 GHz, 80 GS/s, 4ch, 32 Mpts/Ch mode.
LabMaster 10-65Zi-A - 65 GHz, 160 GS/s, 64 Mpts/Ch Digital Bandwidth Interleaved Acquisition Module, 50 Ohm Input. Also operates in 36 GHz, 80 GS/s, 4ch, 32 Mpts/Ch mode.
LabMaster 10-100Zi-A - 100 GHz, 240 GS/s, 96 Mpts/Ch Digital Bandwidth Interleaved Acquisition Module, 50 Ohm Input. Also operates in 36 GHz, 80 GS/s, 4ch, 32 Mpts/Ch mode. or, 65 GHz, 160 GS/s, 1ch, 64 Mpts/Ch w/ 2 ch at 36 GHz

Vertical System

Bandwidth 13 GHz
Analog Bandwidth (Max) 13 GHz
Analog Bandwidth @ 50 Ω (-3 dB) (ProLink Input) 13 GHz
(≥10 mV/div)
Analog Bandwidth @ 50 Ω (-3 dB) (ProBus Input) For 9xxMZi-A "Master" Acquisition Module: 3.5 GHz (≥10 mV/div)
For MCM-Zi Master Control Module: Not Applicable
Analog Bandwidth @ 1 MΩ (-3 dB) (ProBus Input) For 9xxMZi-A "Master" Acquisition Module: 500 MHz (typical, ≥2 mV/div)
For MCM-Zi Master Control Module: Not Applicable
Rise Time (10-90%, 50 Ω) 32.5 ps
(test limit, flatness mode)
Rise Time (20-80%, 50 Ω) 24.5 ps
(flatness mode)
Input Channels Up to 80
Input Channels Up to 80, depending on configuration selected.
(Any combination of up to 80 ProLink input channels, or 4 ProBus input channels)
Bandwidth Limiters 20 MHz, 200 MHz, 1 GHz, 4 GHz, 6 GHz, 8 GHz
Input Impedance ProLink Inputs: 50 Ω+/-2% for ≤100 mV/div, 50 Ω+/-3% for >100 mV/div
ProBus Inputs: 50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF with supplied Probe
Input Coupling ProLink Inputs - 50 Ω: DC, GND
ProBus Inputs - 1 MΩ: AC, DC, GND; 50 Ω: DC, GND
Maximum Input Voltage 50 Ω (ProLink): ±2 Vmax@≤100mV/div, 5.5Vrms@>100mV/div
50 Ω (ProBus): ±5 Vmax, 3.5 Vrms
1 MΩ (ProBus): 250 V max. (peak AC: < 10 kHz + DC)
Channel-Channel Isolation DC to 10 GHz: 50 dB (>315:1)
10 to 15 GHz: 46 dB (>200:1)
15 to 20 GHz: 40 dB (>100:1)
(For any two ProLink input channels, same or different v/div settings, typical)
Vertical Resolution 8-bits
Vertical Resolution 8 bits; up to 11 bits with enhanced resolution (ERES)
Sensitivity 50 Ω (ProLink): 2 mV-1 V/div, fully variable (2-9.9 mV/div via zoom)
50 Ω (ProBus): 2 mV-1 V/div, fully variable; 1 MΩ (ProBus): 2 mV-10 V/div, fully variable
DC Vertical Gain Accuracy (Gain Component of DC Accuracy) ±1% F.S. (typical), offset at 0V; ±1.5% F.S. (test limit), offset at 0V
Vertical Noise Floor (50 mV/div) 1.80 mVrms (typical)
Offset Range 50 Ω (ProLink):
±500 mV @ 2-100 mV/div
±4 V @ >100 mV/div -1 V/div
50 Ω (ProBus):
±750 mV @ 2-100 mV/div
±4 V @ >100 mV/div -1 V/div
1 MΩ:
±1V @ 2-140 mV/div
±10V @ 142mV-1.40V/div
±100V @ 1.42V-10V/div
DC Vertical Offset Accuracy ±(1.5% of offset setting + 1.5% F.S. + 1 mV) (test limit)
 

Horizontal System

Timebases Internal timebase with 10 GHz clock frequency common to all input channels. Single, distributed 10 GHz clock for all channels ensures precise synchronization with timing accuracy between all channels identical to that provided within a single, conventional oscilloscope package.
Time/Division Range 20 ps/div-64 s/div (Real-Time Mode: 20 ps/div - 64 s/div; RIS mode: 20 ps/div - 10 ns/div, user selectable at ≤10ns/div; Roll mode: Not available
Clock Accuracy < 1 ppm + (aging of 0.5ppm/yr from last calibration)
Sample Clock Jitter up to 10µs Acquired Time Range:
100fsrms (Internal Timebase Reference)

up to 6.4ms Acquired Time Range:
150fsrms (Internal Timebase Reference)
Delta Time Measurement Accuracy √2*√((Noise/SlewRate)^2+(Sample Clock Jitter)^2 ) (RMS)+(clock accuracy*reading)(seconds)
Jitter Measurement Floor √((Noise/SlewRate)^2+(Sample Clock Jitter)^2 ) secondsrms (TIE)
Jitter Between Channels <325fsrms
(TIE, typical, measured at maximum bandwidth)
Trigger and Interpolator Jitter <0.1 ps rms (typical, software assisted), 2 ps rms (typical, hardware),
Channel-Channel Deskew Range ±9 x time/div. setting or 25 ns max. (whichever is larger), each channel
External Timebase Reference (Input) 10 MHz; 50 Ω impedance, applied at the rear input of 9xxMZi-A Master Acquisition Module or MCM-Zi Master Control Module
External Timebase Reference (Output) 10 MHz; 50 Ω impedance, output at the rear of 9xxMZi-A Master Acquisition Module or MCM-Zi Master Control Module
 

Acquisition System

Sample Rate 40 GS/s
(80 GS/s with optional interleaving)
Single-Shot Sample Rate/Ch 40 GS/s on each channel.
(80 GS/s when combining channels using the optional WM8Zi-2X80GS External Interleaving Device)
Random Interleaved Sampling (RIS) 200 GS/s for repetitive signals (20 ps/div to 10 ns/div)
Maximum Trigger Rate 1,000,000 waveforms/second (in Sequence Mode, up to 4 channels)
Intersegment Time 1 µs
Maximum Acquisition Memory 256 Mpts/Ch
Standard Memory (4 Ch / 2 Ch / 1Ch) (Number of Segments) 20 M / 20 M / 20M
Memory and Sample Rate can be doubled in half channel mode with use of WM8Zi-2X80GS External Interleaving Device.
(2000)
Memory Options (4 Ch / 2 Ch / 1Ch)
(Number of Segments)
S-32 Option:
32M / 32M / 32M
(7,500)
M-64 Option:
64M / 64M / 64M
(15,000)
L-128 Option:
128M / 128M / 128M
(15,000)
VL-256 Option:
256M / 256M / 256M
(15,000)
Note: On all memory options, memory and sample Rate can be doubled in half channel mode with use of WM8Zi-2X80GS External Interleaving Device.
 

Acquisition Processing

Averaging Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
Enhanced Resolution (ERES) From 8.5 to 11 bits vertical resolution
Envelope (Extrema) Envelope, floor, or roof for up to 1 million sweeps
Interpolation Linear or Sin x/x
 

Triggering System

Coupling Mode DC, AC, HFRej, LFRej
Hold-off by Time or Events From 2 ns up to 20 s or from 1 to 99,999,999 events
Internal Trigger Range ±4.1 div from center
External Trigger Sensitivity, (Edge Trigger) For 9xxMZi-A "Master" Acquisition Module only:
2 div @ < 1 GHz,
1.5 div @ < 500 MHz,
1.0 div @ < 200 MHz,
(for DC coupling)
External Trigger Input Range For 9xxMZi-A "Master" Acquisition Module only: Aux (±0.4 V); Aux/10 (±4 V)
Modes Normal, Auto, Single, and Stop
Sources Using 9xxMZi-A Master Acquisition Module: Any Ch 1-4 (Edge, Window, TV, SMART, Cascade triggers), AUX or AUX/10, or internal Fast Edge on 9xxMZi-A; any input channel (Edge trigger only) on 9xxSZi-A Acquisition Modules (Channels 5 and higher).
Using MCM-Zi Master Control Module: Any Ch 1-4 of the first 9xxSZi-A Acquisition Module input (Edge, Window, TV, SMART, Cascade triggers), or internal Fast Edge on the MCM-Zi module; any input channel (Edge trigger only) on additional 9xxSZi-A Acquisition Modules (Channels 5 and higher).
Slope and level unique to each source except line trigger.
Pre-trigger Delay 0-100% of memory size (adjustable in 1% increments of 100 ns)
Post-trigger Delay 0-10,000 divisions in real time mode, limited at slower time/div settings
Trigger Sensitivity with Edge Trigger ProLink Inputs For 9xxMZi-A "Master" Acquisition Module or Ch 1-4 of a 9xxSZi-A "Slave" Acquisition Module when used with a MCM-Zi Master Control Module:
3 div @ < 13 GHz,
1.5 div @ < 3 GHz,
1.0 div @ < 200 MHz,
(for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω )
Trigger Sensitivity with Edge Trigger ProBus Inputs For 9xxMZi-A "Master" Acquisition Module or Ch 1-4 of a 9xxSZi-A "Slave" Acquisition Module when used with a MCM-ZI Master Control Module:
2 div @ < 3.5 GHz,
1.5 div @ < 1.75 GHz,
1.0 div @ < 200 MHz,
(for DC coupling, ≥ 10 mV/div, 50 Ω )
Max. Trigger Frequency, SMART Trigger For 9xxMZi-A "Master" Acquisition Module or Ch 1-4 only of a 9xxSZi-A "Slave" Acquisition Module when used with an MCM-Zi Master Control Module:
2.0 GHz @ ≥ 10 mV/div (minimum triggerable width 200 ps)
 

Basic Triggers

Edge Triggers when signal meets slope (positive, negative, or either) and level condition.
Window Triggers when signal exits a window defined by adjustable thresholds
TV-Composite Video Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative).
 

SMART Triggers

State or Edge Qualified Triggers on any input source only if a defined state or edge occurred on another input source. Holdoff between sources is selectable by time or events.
Qualified First In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events.
Dropout Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
Pattern Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don't care. The High and Low level can be selected independently. Triggers at start or end of the pattern.
 

SMART Triggers with Exclusion Technology

Glitch Triggers on positive or negative glitches with widths selectable as low as 200ps to 20 s, or on intermittent faults.
Width (Signal or Pattern) Triggers on positive, negative, or both widths with widths selectable as low as 200ps to 20 s, or on intermittent faults.
Interval (Signal or Pattern) Triggers on intervals selectable between 1 ns and 20 s.
Timeout (State/Edge Qualified) Triggers on any source if a given state (or transition edge) has occurred on another source.
Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
Runt Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
Slew Rate Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
Exclusion Triggering Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met
 

Cascade (Sequence) Triggering

Capability Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event.
Types Cascade A then B: Edge, Window, Pattern (Logic) Width, Glitch, Interval, Dropout, or Measurement. Measurement can be on Stage B only.
Cascade A then B then C (Measurement): Edge, Window, Pattern (Logic), Width, Glitch, Interval, Dropout, or Measurement. Measurement can be on Stage C only.
Cascade A then B then C: Edge, Window, Pattern (Logic)
Holdoff Holdoff between A and B or B and C is selectable by time (1ns to 20s) or number of events.
Measurement trigger selection as the last stage in a Cascade precludes a holdoff setting between the prior stage and the last stage.
 

High Speed Serial Protocol Triggering

Data Rates Available only with 9xxMZi-A Master Acquisition Module
Option LM9Zi-6GBIT-80B-8B10B-TD: 600 Mb/s to 6.5 Gb/s, Channel 4 input only
Option LM9Zi-14GBIT-80B-8B10B-TD: 600 Mb/s to 14.1 Gb/s, Channel 4 input only
Pattern Length 80 bits NRZ, eight 8b/10b symbols
Clock and Data Outputs No Clock and Data Recovery outputs provided
 

Low Speed Serial Protocol Triggering (Optional)

Optionally available Using 9xxMZi-A Master Acquisition Module: I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN, LIN, FlexRay, I2S (Audio), MIL-1553
 

Measurement Trigger

Measurement Trigger Capability Select from a large number of measurement parameters trigger on a measurement value with qualified limits. Can be used as only trigger or last event in a Cascade Trigger.
 

Color Waveform Display

Type On 9xxMZi-A "Master" Acquisition Module or 9CZi-A Master Control Module: Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
Resolution WXGA; 1280 x 768 pixels.
Number of traces Display a maximum of 40 traces. Simultaneously display channel, zoom, memory and math traces.
Grid Styles Auto, Single, Dual, Triple, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y, Twelve, Sixteen. Up to twenty grids available with some software options.
Waveform Representation Sample dots joined, or sample dots only
 

Integrated Second Display

Type Supports touch screen integration of user-supplied second display with split-grid capability.
(Note: touch screen driver for second display may not be a Fujitsu driver)
For 9xxMZi-A Master Acquisition Module - requires ordering of option LM9Zi-VIDEOCARD-Zi-EXTDISP-15 to relace the standard video card in the LabMaster CPU, so performance described in "External Monitor Port" is no longer provided.
MCM-Zi Master Control Module provides all video outputs required, and supports extended desktop operation.
Resolution Determined by display chosen by user
 

LeCroy WaveStream™ Fast Viewing Mode

Operation Front panel toggle between WaveStream ON (Analog), ON (Color) and OFF
Intensity 256 Intensity Levels, 1-100% adjustable via front panel control
Types Select analog or color-graded
Number of Channels up to 80 simultaneously
Max Sampling Rate 40 GS/s (80 GS/s with optional WM8Zi-2X80GS external interleaving device)
Persistence Aging Select from 500 ms to Infinity
Waveforms/second (continuous) up to 2500 Waveforms/second
 

Analog Persistence Display

Analog and Color-Graded Persistence Variable saturation levels; stores each trace's persistence data in memory
Persistence Types Select analog, color, or three-dimensional
Trace Selection Activate persistence on all or any combination of traces
Persistence Aging Select from 500 ms to infinity
Sweep Display Modes All accumulated, or all accumulated with last trace highlighted
 

High Speed Digitizer Output (Option)

Type Option LSIB-2. Installs in LabMaster 9xxMZi-A CPU or LabMaster MCM-Zi Master Control Module and uses one available PCIe slot normally used by a 9xxSZi-A Module.
Transfer Rate up to 325 MB/s (typical) - Maximum of 4 channels (consult Teledyne LeCroy for >4 channels)
Output Protocol PCI Express, Gen 1 (4 lanes utilized for data transfer)
Control Protocol TCP/IP
Command Set Via Windows Automation, or via LeCroy Remote Command Set
 

Zoom Expansion Traces

Zoom Expansion Traces Display up to 12 Zoom and 12 Math/Zoom traces
 

Internal Waveform Memory

Internal Waveform Memory 12 active waveform memory traces (M1-M12) store 16 bit/point full length waveforms. Waveforms can be stored to any number of files limited only by the data storage media capacity.
 

Setup Storage

Front Panel and Instrument Status Store to the internal hard drive, over the network, or to a USB-connected peripheral device.
 

Interface

Remote Control Via Windows Automation, or via LeCroy Remote Command Set
Network Communication Standard VXI-11 or VICP, LXI Class C (v1.2) Compliant
GPIB Port Supports IEEE - 488.2. Installs in LabMaster 9xxMZi-A CPU or MCM-Zi Master Control Module and uses one available PCIe slot normally used by a 9xxSZi-A Module.
LSIB Port (optional) Supports PCIe Gen1 x4 protocol with LeCroy supplied API. Installs in LabMaster 9xxMZi-A CPU or MCM-Zi Master Control Module and uses one available PCIe slot normally used by a 9xxSZi-A Module.
Ethernet Port Supports 10/100/1000BaseT Ethernet interface (RJ45 port)
USB Ports 9xxMZi-A CPU or MCM-Zi Master Control Module: minimum 2 total USB 2.0 ports on rear of unit to support Windows compatible devices
9xxMZi "Master" Acquisition Module or MCM-Zi Master Control Module: minimum 3 total USB 2.0 ports on front of unit to support Windows compatible devices
External Monitor Port In 9xxMZi-A CPU:
Dual Link DVI compatible to support internal display on 9xxMZi-A Master Acquisition Module (1280 x 768 pixel resolution) or customer-supplied monitor with up to WQXGA (2560 x 1600 pixel) resolution.
Add LM9Zi-VIDEOCARD-EXTDESKTOP replacement videocard to support two DVI-D monitors with extended desktop (max 1920 x 1200 pixel resolution for both monitors).
In MCM-Zi Master Control Module:
Dual Link DVI compatible to support internal display on MCM-Zi Master Control Module (1280 x 768 pixel resolution) and customer-supplied monitor with up to WQXGA (2560 x 1600 pixel) resolution using extended desktop mode.
 

Automatic Setup

Auto Setup Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals
Find Vertical Scale Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range
 

General

Auto Calibration Ensures specified DC and timing accuracy is maintained for 1 year minimum.
 

Processor/CPU

Type In 9xxMZi-A CPU or MCM-Zi Master Control Module: Intel® XeonTM X5660 2.8 GHz (or better). There are two processors in each CPU, and each processor has 6 cores for a total of 12 cores and an effective processor speed of 33.6 GHz.
Processor Memory 24 GB standard. Up to 192 GB optionally available.
Operating System Microsoft Windows® 7 Professional Edition (64-bit)
Real Time Clock Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks.
 

Environmental and Safety

Temperature (Operating) +5 °C to +40 °C
Temperature (Non-Operating) -20 °C to +60 °C
Humidity (Operating) 5% to 80% relative humidity (non-condensing) up to +31 °C.
Upper limit derates to 50% relative humidity (non-condensing) at +40 °C.
Humidity (Non-Operating) 5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F
Altitude (Operating) Up to 10,000 ft. (3048 m) at or below +25 °C
Altitude (Non-Operating) Up to 40,000 ft. (12,192 m)
Random Vibration (Operating) 0.5 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes
Random Vibration (Non-Operating) 2.4 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes
Functional Shock 20 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total
 

Physical Dimensions

Dimensions (HWD) 9xxMZi-A "Master" Acquisition Module14"H x 18.4"W x 16"D (355 x 467 x 406 mm).
9xxMZi-A CPU - 5.7"H x 18.2"W x 20.8"D (145mm x 462mm x 527mm).
9xxSZi-A "Slave" Acquisition Module - 7"H x 18.2"W x 20.8"D (177mm x 462mm x 527mm).
MCM-Zi Master Control Module - 10.9"H x 18.2"W x 15.6"D (277 x 462 x 396 mm)
Weight 9xxMZi-A "Master" Acquisition Module - 48 lbs. (22 kg)
9xxMZi-A CPU - 29 lbs. (13 kg)
9xxSZi-A "Slave" Acquisition Module - 37 lbs. (17 kg)
MCM-Zi Master Control Module - 47 lbs. (21.4 kg)
Shipping Weight 9xxMZi-A "Master" Acquisition Module - 70 lbs. (32 kg)
9xxMZi-A CPU - 36 lbs. (16 kg)
9xxSZi-A "Slave" Acquisition Module - 44 lbs. (20 kg)
MCM-Zi Master Control Module - 56 lbs. (25.5 kg)
 

Auxiliary Input

Signal Types For External Trigger Input. Located in 9xxMZi-A "Master" Acquisition Module or Slave Acquisition Module #1 (rear-mounted BNC, 50 Ω) used with MCM-Zi Master Control Module.
Coupling Using 9xxMZi-A Master Acquisition Module: 50 Ω: DC; 1 MΩ: AC, DC, GND
Using MCM-Zi Master Control Module: 50 Ω only
Max. Input Voltage 5 Vrms (50 Ω); 250 V (Peak AC < 10 kHz + DC) (1 MΩ)
 

Auxiliary Output

Signal Types 9xxMZi-A "Master" Acquisition Module: Select from calibrator, control signals or Off
(Not available with MCM-Zi Master Control Module)
Output Signal 500 Hz-5 MHz square wave or DC level; 0.0 to 500 mV into 50 Ω (0-1 V into 1 MΩ)
Control Signals Trigger enabled, trigger out, pass/fail status, off
Connector Type BNC, located on front of 9xxMZi-A "Master" Acquisition Module
 

Probes

Probes 9xxMZi-A Models: Acquisition Module: Qty. (4) ÷10 Passive Probes
9xxSZi-A and MCM-Zi Models: No passive probes supplied
Probe System 9xxMZi-A "Master" Acquisition Module: Probus and ProLink.
9xxSZi-A "Slave" Acquisition Module: ProLink.
Automatically detects and supports a variety of compatible probes.
Scale Factors Automatically or manually selected depending on probe used
Calibration Output 9xxMZi-A "Master" Acquisition Module: 1kHz square wave, 1Vp-p (typical), output to probe hook.
9xxMZi-A "Master" Acquisition Module and MCM-Zi Master Control Module: Fast Edge output, 5MHz square wave, 350mVp-p (typical), 50ps rise time, output to SMA connector, AC Coupled
 

Power Requirements

Voltage LabMaster 9xxMZi-A "Master" Acquisition Module and 9xxSZi-A: 100-240 VAC ±10% at 45-66 Hz; 100-120 VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection, Installation Category II
LabMaster 9xxMZi-A CPU: 100-240 VAC ±10% at 45-66 Hz; Automatic AC Voltage Selection, Installation Category II
LabMaster MCM-Zi Master Control Module: 100-240 VAC ±10% at 45-66 Hz; Automatic AC Voltage Selection, Installation Category II
Max. Power Consumption 9xxMZi-A "Master" Acquisition Module - 850 W / 850 VA.
9xxMZi-A CPU - 400 W / 400 VA.
9xxSZi-A "Slave" Acquisition Module - 700 W / 700 VA.
MCM-Zi Master Control Module - 450 W / 450 VA.
Each Module and the CPU has a separate power cord.
 

Certifications

Certifications CE Compliant, UL and cUL listed; conforms to EN 61326, EN 61010-1, EN61010-2-030, UL 61010-1 3rd edition, and CSA C22.2 No. 61010-1-12
 

Warranty and Service

Warranty and Service 3-year warranty; calibration recommended annually.
Optional service programs include extended warranty, upgrades, and calibration services.
 

LabMaster 9 Zi-A 13 GHz Systems