Products
Oscilloscopes

WavePro 7 Zi-A Oscilloscopes

Combining signal fidelity with an architecture that maximizes speed in every performance aspect, the new WavePro 7 Zi-A Series presents a totally new oscilloscope experience from 1.5 to 6 GHz bandwidths. Experience 50 Ω and 1 MΩ inputs for every channel and four inputs into high-speed front end amplifiers and analog to digital converters. Experience the new X-Stream II architecture that provides 10 to 20 times faster long memory performance than any other oscilloscope. Combined with Teledyne LeCroy’s flexible and deep analysis toolbox, the WavePro 7 Zi-A Series gives an unforgettable experience for the debugging, validation, analysis and compliance testing of electronic designs.

Explore WavePro 7 Zi-A Explore WavePro 7 Zi-A
WavePro 715Zi-A   (1.5 GHz Bandwidth, 4 Input Channels, 20 GS/s on 2 Ch Max Sample Rate)
Quick Specs
Bandwidth1.5 GHz
Sample Rate20 GS/s on 2 Ch
10 GS/s on 4 Ch
Maximum Acquisition Memory256 Mpts (2 Ch operation)
Input Channels4
Vertical Resolution8-bits
WavePro 725Zi-A   (2.5 GHz Bandwidth, 4 Input Channels, 40 GS/s on 2 Ch Max Sample Rate)
Quick Specs
Bandwidth2.5 GHz
Sample Rate40 GS/s on 2 Ch
20 GS/s on 4 Ch
Maximum Acquisition Memory256 Mpts (2 Ch operation)
Input Channels4
Vertical Resolution8-bits
WavePro 735Zi-A   (3.5 GHz Bandwidth, 4 Input Channels, 40 GS/s on 2 Ch Max Sample Rate)
Quick Specs
Bandwidth3.5 GHz
Sample Rate40 GS/s on 2 Ch
20 GS/s on 4 Ch
Maximum Acquisition Memory256 Mpts (2 Ch operation)
Input Channels4
Vertical Resolution8-bits
WavePro 740Zi-A   (4 GHz Bandwidth, 4 Input Channels, 40 GS/s on 2 Ch Max Sample Rate)
Quick Specs
Bandwidth4 GHz
Sample Rate40 GS/s on 2 Ch
20 GS/s on 4 Ch
Maximum Acquisition Memory256 Mpts (2 Ch operation)
Input Channels4
Vertical Resolution8-bits
WavePro 760Zi-A   (6 GHz Bandwidth, 4 Input Channels, 40 GS/s on 2 Ch Max Sample Rate)
Quick Specs
Bandwidth6 GHz
Sample Rate40 GS/s on 2 Ch
20 GS/s on 4 Ch
Maximum Acquisition Memory256 Mpts (2 Ch operation)
Input Channels4
Vertical Resolution8-bits
Check up to three models.
Freedom from Limitations
WavePro 7 Zi-A excels in the way it offers general purpose utility never before seen in oscilloscopes from 1.5 to 6 GHz. All WavePro 7 Zi-A oscilloscopes contain selectable 50 Ω and 1 MΩ input capability. The 4 and 6 GHz models include both ProBus and ProLink input types which means eight probes can be attached and then multiplexed from the front panel or by remote control. The result— it's easy to hook up a passive probe even on 4 or 6 GHz models—no more frustration and hassle of trying to find a 1 MΩ input adapter. Plus, any existing investment in Teledyne LeCroy probes, such as current probes, single-ended or differential active probes, or high voltage probes, is fully leveraged. Perfect.

More Triggers Isolate More Problems More Effectively
A powerful combination of high bandwidth Edge and 10 different SMART triggers allow you to isolate the problem quickly and begin to focus on the cause. Most SMART triggers allow triggering on pulse widths or features as small as 200 ps. A high-speed serial trigger enables triggering on up to 2.7 Gb/s serial patterns of up to 80-bits in length. Built-in hardware clock recovery is also included.

TriggerScan™
TriggerScan uses high-speed hardware triggering capability with persistence displays to capture only the signals of interest and provide answers up to 100X faster that other methods. Traditional fast display update modes work best on frequent events occurring on slow edge rates while TriggerScan excels in finding infrequent events on fast edge rates.

WaveScan™ Advanced Search and Analysis Finds Problems that Triggers Won't Find
The best trigger won't find all unusual events—a more powerful capability is sometimes needed. WaveScan provides the ability to locate unusual events in a single capture (i.e., capture and search) or "scan" for an event in many acquisitions over a long period of time. Select from more than 20 search modes (frequency, rise time, runt, duty cycle, etc.), apply a search condition and begin scanning. When an event is found, WaveScan highlights the error on screen and displays a table listing the errors.

Fully Integrated Mixed Signal Oscilloscope (4+36) Option
Add Mixed Signal Oscilloscope (MSO) operation using the MS Series mixed signal options. These convenient add-ons connect to the Teledyne LeCroy LBUS and quickly and simply provide capability to acquire up to 36 digital lines time-correlated with analog waveforms. No time is wasted in trying to learn how to connect, synchronize or operate a complicated logic analyzer since the MSOs are already completely integrated into the scope operation. In addition to acquiring digital lines, they are also helpful for monitoring low-speed signals, such as serial data clock, data, and chip select signals, thus preserving the analog channels for higher speed requirements.

Teledyne LeCroy — The Acquisition Memory Leader
Teledyne LeCroy has found a way to make long acquisition memory seamless and pain free to use. The WavePro 7 Zi Series' proprietary X-Stream II architecture supports capturing, zooming, measuring and analyzing multiple waveforms at 256 Mpts deep. What you experience is performance gains of 10–20X over what is available today. Whether looking at the acquired signal or while analyzing several screens of statistics, tracking a frequency or identifying complex patterns the WavePro 7 Zi is designed to perform.

Instantaneous Responsiveness
The first time you use the Zi oscilloscope you will experience responsiveness that you've never seen before. Acquiring and manipulating the longest record lengths and the most complex WaveShape Analysis are all easily handled at the same time. Whether you use the front panel or choose to make adjustments with a mouse or the touch screen, the system performs.

X-Stream II Architecture

Optimized for Fast Throughput
Designed for long memory operation and responsiveness X-Stream II technology enables high throughput of data—even when the oscilloscope is performing multiple 100 Mpts waveforms. It does so by eliminating the trade-offs between long memory length and quick processing. WavePro 7 Zi's proprietary architecture design is augmented with an Intel® Core™ 2 Quad processor, high-speed serial data buses, a 64-bit OS and up to 8 GB of RAM.

Optimized for Long Memory
By using variable waveform segment lengths to improve the CPU cache memory efficiency the WavePro 7 Zi is designed for the fastest processing of long waveform records. The result—10-20 times faster processing compared to other oscilloscopes.

Optimized for Responsiveness
By dynamically allocating buffers where to maximize memory availability the WavePro 7 Zi Series embodies the fastest front panel responsiveness. Waveform previewing shows interim calculation results while a built in processing abort make front panel control changes instant by stopping the current process and allowing new waveforms to be positioned or zoomed—all without a lengthy recalculation.

Digital Filter Software Package (WPZi-DFP2)
DFP2 lets you implement Finite or Infinite Impulse Response filters to eliminate undesired spectral components, such as noise, and enhances your ability to examine important signal components. You can choose from a standared set of FIR or IIR filters. You can also design your own filters.

Spectrum Analyzer Analysis Package (WPZi-SPECTRUM)
The spectrum converts the controls of your oscilloscope to those of a spectrum analyzer. Adjust the frequency span, resolution and center frequency. Apply filtering to your signal and watch the frequency signature change in real time. A unique peak search labels the spectral components and presents frequency and level in a table. Touch any line jump to that peak.

Mixed Signal Oscilloscope Option (MS-250/MS-500)
The Mixed Signal option allows the WavePro 7 Zi to convert to a mixed signal oscilloscope with up to 36 digital channels. Channels are sampled at 2 GS/s up to 50 Mpts/Ch. Having up to 36 digital inputs timesynchronized with four analog channels extends the oscilloscope's use to provide a total system view.

Jitter and Timing Analysis Package
Specialized timing parameters measure period, cycle-cycle, half period, width, etc. jitter on a variety of signals. Use the three views of jitter (statistical, time, and frequency) to understand root cause and to debug problems. Histograms provide understanding of statistical distributions. Tracks provide a means to show time-correlated peaks of jitter, and compare to other signals. FFTs provide the ability to debug root causes of high in-circuit jitter.

Main Specifications

Bandwidth 1.5 GHz - 6 GHz
Starting from $29,300
Standard Memory 20 Mpts - 256 Mpts
Max Memory 256 Mpts/ch
Max Sampling Rate 40 GS/s
Input Channels 4
Resolution 8-bit
 

Mixed Signal Solutions

MS-500
500 MHz, 18 Channels, 2 GS/s, 50 Mpts/ch Mixed Signal Oscilloscope Option
MS-500-36
250 MHz,36 Ch,1 GS/s,25 Mpts/ch (500MHz,18 Ch,2 GS/s,50 Mpts/ch Interleaved) Mixed Signal Option
MS-250
250 MHz, 18 Channels, 1 GS/s, 10 Mpts/ch Mixed Signal Oscilloscope Option

Memory Options

WPZi-A-S-32
32 Mpt/Ch (64 Mpt/Ch Interleaved) Memory Option for WavePro Zi-A.
WPZi-A-M-64
64 Mpt/Ch (128 Mpt/Ch Interleaved) Memory Option for WavePro Zi-A.
WPZi-A-L-128
128 Mpt/Ch (256 Mpt/Ch Interleaved) Memory Option for WavePro Zi-A.

Sampling Rate Options

WPZi-1.5GHz-4X20GS
20 GS/s (40 GS/s Interleaved) Sampling Rate Option for 1.5 GHz WavePro Zi

Computer Upgrade

WPZi-500GB-HD
Upgrade from standard size hard drive to 500 GB hard drive
WPZi-500GB-RHD-02
Additional 500 GB Hard Drive for WPZi. Includes Windows 7 OS,LeCroy oscilloscope software and critical scope operational file duplicates.
WPZi-8-UPG-32GBRAM
8 GB to 32 GB CPU RAM Upgrade Option

Remote Control/Network Options

GPIB-2
IEEE 488 GPIB Interface

Power Analysis Software

WPZi-PWR
Power Analysis Option for WP 7 Zi

Serial Trigger and Decode

WPZi-USB2-HSICbus D
USB 2.0 HSIC Decode Option
WPZi-VBA
Vehicle Bus Analyzer BundleIncludes CAN TDM, CAN Symbolic, FlexRay TDP, LIN TD and Protobus MAG.
WPZi-CAN FDbus TD
CAN FD Trigger and Decode Option for WavePro Zi Oscilloscopes
WPZi-FCbus D
FibreChannel decode annotation option for WavePro 7Zi series
WPZi-SASbus D
SAS Decode annotation option for WavePro 7Zi series
WPZi-DigRFV4bus D
DigRF V4 Bus Decode option for WavePro Zi series
WPZi-Manchesterbus D
Manchester Bus Decode Option for WavePro Zi
WPZi-ENETbus D
ENET Bus Decode Option for WavePro Zi
WPZi-SATAbus D
SATA Decode option for WavePro ZiSupports SATA Gen 1, 2, and 3.
WPZi-EMB
Embedded bundle, Includes I2C TD, SPI TD, UART TD
WPZi-MSO-EMB
Embedded bundle, Includes MS-500-36 with I2C TD, SPI TD, UART TD
WPZi-1553 TD
MIL-STD-1553 Trigger and decode option for WavePro Zi
WPZi-8B10B D
8b10b Decode Option for WavePro Zi Series Oscilloscopes
WPZi-ARINC429bus DSymbolic
ARINC 429 Bus Symbolic Decode option for WavePro Zi
WPZi-AudioBus TD
AudioBus trigger and decode for WavePro 7Zi
WPZi-AudioBus TDG
AudioBus trigger, decode, and graph for WavePro 7Zi
WPZi-CANbus TD
CAN Bus Trigger & Decode Option for WavePro Zi Series Oscilloscopes
WPZi-CANbus TDM
CAN Bus Trigger, Decode, and Measure Option for WavePro Zi Series Oscilloscopes
WPZi-DigRF3Gbus D
DigRF 3G Bus Decode option for WavePro Zi
WPZi-DPHYbus D
D-PHY Bus Decode option for WavePro Zi
WPZi-FlexrayBus TD
FlexRay Bus Trigger & Decode Option for WavePro Zi Series Oscilloscopes
WPZi-DPHYbus DP
MIPI D-PHY CSI-2, DSI Bus Decode and Physical Layer test option for WavePro 7Zi series
WPZi-FlexRayBus TDP
FlexRay Bus Trigger, Decode, and Physical Layer Test Option for WavePro Zi Series Oscilloscopes
WPZi-HSPT
100 Mb/s to 3.125 Gb/s High Speed Serial Trigger Option for 4-6 GHz Oscilloscopes& Disk Drive Analyzer
WPZi-I2Cbus TD
I2C Bus Trigger & Decode Option for WavePro Zi Series Oscilloscopes
WPZi-MPHYbus D
MIPI M-PHY Bus Decode option for WavePro 7Zi series
WPZi-LINbus TD
LIN Bus Trigger & Decode Option for WavePro Zi Series Oscilloscopes
WPZi-MSPT
100 Mb/s to 1.25 Gb/s Medium Speed Serial Trigger Option for 2.5-3.5 GHz Oscilloscopesand Disk Drive Analyzers
WPZi-PCIEbus D
PCI Express (Gen 1.x, 2.0, and 3.0) Protocol Link Layer Decode Annotation for WavePro 7 Zi SeriesOscilloscopes and Analyzers
WPZi-MPHYbus DP
MIPI M-PHY Bus Decode and Physical Layer test option for WavePro 7Zi series
WPZi-PROTObus MAG
Serial Debug Toolkit - Measure Analyze Graph for WavePro ZiCompatible with I2C, SPI, UART, CAN, LIN, FLX, D-PHY, DigRF 3G, DigRF v4, ARINC 429, MIL-STD-1553
WPZi-ProtoSync
Decode Annotation and Protocol Analyzer Software Synchronization Option for WavePro Zi
WPZi-ProtoSync-BT
Decode Annotation and Protocol Analyzer + Bit Tracer Software Synchronization Option for WavePro Zi
WPZi-SPIbus TD
SPI Bus Trigger & Decode Option for WavePro Zi Series Oscilloscopes
WPZi-UART-RS232bus TD
UART and RS232 Bus Trigger & Decode Option for WavePro Zi Series Oscilloscopes
WPZi-USB2bus D
USB 2.0 Bus Decode option for WavePro Zi
WPZi-USB3bus D
USB 3.0 Decode option for WavePro ZiSupports USB 3.0, 2.0, 1.x
WPZI-SENTbus D
SENT Bus Decode Option for WavePro Zi

Jitter Analysis Software

WPZi-JITKIT
Clock, clock-data Jitter Analysis and views of time, statistical, spectral, and jitter overlay

Digital Filtering Software

WPZi-DFP2
Digital Filter Software Package for WavePro Zi Series

High Speed Output Accessories

LSIB-1
High speed PCIe Gen1 x4 digitizer output for LeCroy oscilloscope. Half-height card
LSIB-HOSTBOARD
PCI Express x4 Host Interface Board for desktop PC
LSIB-HOSTCARD
PCI Express x1 Express Card Host Interface for laptop Express Card slot
LSIB-CABLE-3M
PCI Express x 4 3-meter cable with x4 cable connectors included
LSIB-CABLE-7M
PCI Express x 4 7-meter cable with x4 cable connectors include

Serial Data Compliance

QPHY-BroadR-Reach
QualiPHY Enabled BroadR-Reach Compliance Software Option. Requires either SDA2 or JTA2
QPHY-MOST50
QualiPHY Enabled MOST50 ePHY Compliance Software Option. Requires options DFP2 and SDM or SDA2
QPHY-MOST150
QualiPHY MOST150 oPHY and cPHY Compliance Software Option. Requires options DFP2 and SDM or SDA2
QPHY-MIPI-DPHY
QualiPHY Enabled MIPI DPHY Compliance Software Option
QPHY-DDR2
QualiPHY Enabled DDR2 Compliance Software Option
QPHY-DDR3
QualiPHY Enabled DDR3 Compliance Software Option
QPHY-ENET
QualiPHY Enabled Ethernet 10/100/1000BT Compliance Software Option
QPHY-HDMI
QualiPHY Enabled HDMI Compliance Test Software
QPHY-LPDDR2
QualiPHY Enabled LPDDR2 Compliance Software Option
QPHY-PCIe
QualiPHY Enabled PCIe Gen1 and Gen2 Compliance Software Option
QPHY-SATA-TSG-RSG
QualiPHY Enabled SATA (PHY, TSG, RSG, and OOB) Compliance Software Option
QPHY-USB
QualiPHY Enabled USB 2.0 Compliance Software Option
QPHY-UWB
QualiPHY Enabled WiMedia UWB Compliance Software Option
ENET-2ADA-BNCSMA
Adapter Set- 2 BNC/M to SMA/F
ENET-2CAB-SMA018
Cable Set- 2 SMA-SMA 18 inches
ENET-2CAB-SMA036
Cable Set- 2 SMA-SMA 36 inches
WPZi-SDM
Serial Data Mask Software Package for WavePro 7 Zi Series

Serial Data Analysis

WPZi-SDAIII-CompleteLinQ
Bundle - Multi-Lane SDA LinQ Framewk, incl. Eye, Jitter, Noise, Xtalk Meas, w/EyeDrII & VirtualProbe
WPZi-SDAIII-CrossLinQ
Multi-Lane Serial Data Analysis LinQ Framework, Eye, Jitter, Noise and Crosstalk Measurements
WPZi-SDAIII-Crosstalk
Single-Lane Serial Data Analysis Framework, Eye, Jitter, Noise and Crosstalk Measurements
WPZi-SDAIII-LinQ
Multi-Lane Serial Data Analysis LinQ Framework, Eye and Jitter Measurements
WPZi-SDAIII
Single-Lane Serial Data Analysis Framework, Eye and Jitter Measurements
WPZi-EYEDRII-VP
Bundle - EyeDrII and VirtualProbe Toolkits
WPZi-EYEDRII
Signal Integrity Toolkit - Channel & Fixture De-embedding/Emulation, Tx/Rx Equalization
WPZi-VIRTUALPROBE
Advanced De-embedding, Emulation and Virtual Probing Toolkit
WPZi-CBL-DE-EMBED
Cable De-Embedding Option for WavePro Zi Series Oscilloscopes

Other Software Options

WPZi-SPECTRUM
Spectrum Analyzer and Advanced FFT Option for WavePro Zi Series
WPZi-EMC
EMC Pulse Parameter Software Package for WavePro Zi Series
WPZi-ET-PMT
Electrical Telecom Pulse Mask Test Package for WavePro Zi Series

Miscellaneous

KYBD-1
Keyboard, USB
WPZi-HARDCASE
Hard carrying case for all WavePro Zi Series oscilloscopes
WPZi-SOFTCASE
Soft carrying case for all WavePro Zi Series oscilloscopes
RACKMOUNT-1
Rack-mount accessory for converting a WavePro Zi series oscilloscope to an 8U rack-mounted package
TTL-AUX-OUT
TTL Auxiliary output adapter for 7Zi and 8Zi oscilloscopes
Zi-FrontPanel
Removable front panel for WavePro 7Zi and WaveMaster 8Zi Oscilloscopes
Rise-Time-Filter-100ps
PSPL Rise Time Filter - PSPL Part Number 5915-110-100ps
Rise-Time-Filter-150ps
PSPL Rise Time Filter - PSPL Part Number 5915-110-150ps
20dB-SMA-Attenuator
20 dB SMA Attenuators

Synchronize Oscilloscope Options

Zi-8CH-SYNCH
HW Kit to allow combination of channels from two Zi or Zi-A oscilloscopes. Allows combination of allchannels from two oscilloscopes (8 channels total) or combination of all 20-30 GHz channels from two20-30 GHz 8Zi or 8Zi-A oscilloscopes (4 channels total), or combination of 45 GHz channels

Data Storage Software

WPZi-AORM
Advanced Optical Recording Measurement Package for WavePro Zi Series
WPZi-DDM2
Disk Drive Measurements Software Package for WavePro Zi Series

Mixed Signal Accessories

PK400-1
Large Gripper Probe Set for 0.10 inch (2.54mm) pin pitch. Includes 10 probes with color coded leads
PK400-2
Medium Gripper Probe Set for 0.04 inch (1.0mm) pin pitch. Includes 10 probes with color coded leads
PK400-3
Small Gripper Probe Set for 0.008 inch (0.2 mm) pin pitch. Includes 10 probes with color coded leads
MSO-MICTOR
36 Channel Mictor Connector for MS Series (Includes 1 MSO-MICTOR-SHROUD)
MSO-3M
18 Pin 3M Interface cable MSO-3M (Mates with 3M part number 2520-6002)
MSO-DLS-36
16" Digital Lead Set, D18-D35

Serial Data Test Fixtures

TF-ENET-B
10/100/1000BaseT Ethernet Test Fixture
TF-HDMI-3.3V-QUADPAK
HDMI Pull-Up Terminator Quad Pack - For Use with the Wilder-Tech HDMI-TPA-P Plug Test Adapter
TF-SATA-C-Kit
SATA Compliance Test Kit
TF-USB-B
USB 2.0 Compliance Test Fixture

Active Voltage Probes

ZS4000
4.0 GHz, 0.6 pF, 1 MOhm Active Voltage Probe
ZS2500
2.5 GHz, 0.9 pF, 1 MOhm Active Voltage Probe
ZS1500
1.5 GHz, 0.9 pF, 1 MOhm Active Voltage Probe
ZS1000
1 GHz, 0.9 pF, 1 MOhm Active Voltage Probe
ZS2500-QUADPAK
Set of 4 ZS2500, 2.5 GHz High Impedance Active Probes
ZS1500-QUADPAK
Set of 4 ZS1500, 1.5 GHz High Impedance Active Probes
ZS1000-QUADPAK
Set of 4 ZS1000, 1 GHz High Impedance Active Probes

Current Probes

CP030
30A, 50MHz Current Probe
CP031
30A, 100MHz Current Probe
AP015
30 A, 50 MHz Current Probe - AC/DC, 30 A rms, 50 A Peak Pulse Limited Availability
CP150
150 A, 10 MHz Current Probe - AC/DC, 150 A rms, 500 A Peak Pulse
CP500
500 A, 2 MHz Current Probe - AC/DC, 500 A rms, 700 A Peak Pulse
DCS015
Deskew Calibration Source for AP015

Differential Amplifiers

DA1855A
1 Ch, 100 MHz Differential Amplifier with Precision Voltage Source
DXC100A
÷100 or ÷10 Selectable, 250 MHz Passive Differential Probe Pair
DXC200
÷1, 50 MHz, Passive Differential Probe Pair
DXC-5100
100:1 250 MHz 10 Mohm 2.75pf Differential Probe Pair;
DA101
10:1 1 MOhm Passive Attenuator
DA1855A-PR2
2 Ch, 100 MHz, Differential Amplifier with Precision Voltage Source
DA1855A-PR2-RM
2 Ch, DA1855A with Rackmount (must be ordered at time of purchase, no retrofit)
DA1855A-RM
DA1855A with rackmount;

Differential Probes (<= 1.5 GHz)

AP033
500 MHz Differential Probe Limited Availability
ZD1000
1 GHz, 1.0 pF Active Differential Probe, ±8 V
ZD1500
1.5 GHz, 1.0 pF Active Differential Probe, ±8 V
ZD200
200 MHz, 3.5 pF, 1 MOhm Active Differential Probe, ±20 V
ZD500
500 MHz, 1.0 pF Active Differential Probe, ±8 V

Differential Probes (4-6 GHz)

D410-PS
4 GHz Complete Probe System with Dx10-SI Solder-In Tip (Qty. 1), Dx10-QC Quick Connect (Qty. 1),Dx10-SP Square Pin (Qty. 1), and Dx10-PT-KIT Positioner Tip Browser (Qty. 1)
D420-PS
4 GHz Complete Probe System with Dx20-SI Solder-In Tip (Qty. 1), Dx20-QC Quick Connect (Qty. 1),Dx20-SP Square Pin (Qty. 1), and Dx20-PT-KIT Positioner Tip Browser (Qty. 1)
D610-PS
6 GHz Complete Probe System with Dx10-SI Solder-In Tip (Qty. 1), Dx10-QC Quick Connect (Qty. 1),Dx10-SP Square Pin (Qty. 1), and Dx10-PT-KIT Positioner Tip Browser (Qty. 1)
D620-PS
6 GHz Complete Probe System with Dx20-SI Solder-In Tip (Qty. 1), Dx20-QC Quick Connect (Qty. 1),Dx20-SP Square Pin (Qty. 1), and Dx20-PT-KIT Positioner Tip Browser (Qty. 1)
D410
WaveLink D410 4 GHz/2.5Vp-p and +/-3V Offset Range Differential AmplifierSmall Tip Module with Solder-in, Quick Connect, and Square Pin Lead Sets, plus accessories.
D420
WaveLink D420 4 GHz/5Vp-p and +/-3V Offset Range Differential AmplifierSmall Tip Module with Solder-in, Quick Connect, and Square Pin Lead Sets, plus accessories.
D610
WaveLink D610 6 GHz/2.5Vp-p and +/-3V Offset Range Differential AmplifierSmall Tip Module with Solder-in, Quick Connect, and Square Pin Lead Sets, plus accessories.
D620
WaveLink D620 6 GHz/5Vp-p and +/-3V Offset Range Differential AmplifierSmall Tip Module with Solder-in, Quick Connect, and Square Pin Lead Sets, plus accessories.
D400A-AT
WaveLink D400 4 GHz/4.8Vp-p Differential Amplifier Module with Adjustable Tips.
D600A-AT
WaveLink D600 6 GHz/4.8Vp-p Differential Amplifier Module with Adjustable Tips.
WL-PBUS-CASE
WaveLink ProBus Platform/Cable Assembly Kit for D410, D420, and D400A-AT WaveLink Probes.
WL-PLINK-CASE
WaveLink ProLink Platform/Cable Assembly Kit for D610, D620, D600A-AT, and Dxx30 WaveLink Probes.
Dx10-PT-KIT
WaveLink Dx10-PT Adjustable Positioner Tip Kit. Includes XYZ Positioner Assembly with MechanicalInterconnects, Adhesive Kit, Connection Guides, Hand-held Wand, and Replacement Pins(Qty. 4)/Sockets(Qty 2).
Dx20-PT-KIT
WaveLink Dx20-PT Adjustable Positioner Tip Kit. Includes XYZ Positioner Assembly with MechanicalInterconnects, Adhesive Kit, Connection Guides, Hand-held Wand, and Replacement Pins(Qty. 4)/Sockets(Qty. 2).
Dx10-HiTemp
WaveLink Temperature Extension cables for Dx10.Includes 1 set of matched 30" high temperature cables, 1 solder tip lead set
Dx20-HiTemp
WaveLink Temperature Extension cables for Dx20.Includes 1 set of matched 30" high temperature cables, 1 solder tip lead set
Dx10-SI
Replacement Solder tip lead set for D410/D610
Dx20-SI
Replacement Solder tip lead set for D420/D620
TF-DSQ
Probe Deskew and Calibration Test Fixture Limited Availability

Differential Probes (8-13 GHz)

WL-PLINK-CASE
WaveLink ProLink Platform/Cable Assembly Kit for D610, D620, D600A-AT, and Dxx30 WaveLink Probes.
TF-DSQ
Probe Deskew and Calibration Test Fixture Limited Availability

Differential Probes (13-25 GHz)

TF-DSQ
Probe Deskew and Calibration Test Fixture Limited Availability

High Voltage Differential Probes

AP031
700 V, 25 MHz High-Voltage Differential Probe (÷10, ÷100)
ADP300
1,400 V, 20 MHz High-Voltage Differential Probe
ADP305
1,400 V, 100 MHz High-Voltage Differential Probe
HVD3102
25 MHz High Voltage Differential Probe
HVD3106
120 MHz High Voltage Differential Probe

High Voltage Probes

PPE1.2KV
10:1/100:1 200/300 MHz 50 MOhms High-Voltage Probe 600V/1.2kV Max. Volt. DC
PPE2KV
100:1 400 MHz 50 MOhms High-Voltage Probe
PPE4KV
100:1 400 MHz 50 MOhms High-Voltage Probe
PPE5KV
100:1 400 MHz 50 MOhms High-Voltage Probe
PPE6KV
1000:1 400 MHz 5 MOhms/50 MOhms High-Voltage Probe

Optical Probes

OE425
Optical-to-Electrical Converter, 500-870 nm ProBus BNC Connector
OE455
Optical-to-Electrical Converter, 950-1630 nm ProBus BNC Connector
OE525
Optical-to-Electrical Converter, 500-870 nm ProLink BMA Connector
OE555
Optical-to-Electrical Converter, 950-1630 nm ProLink BMA Connector
OE695G
Optical to Electrical Converter

Probe Parts and Kits

Dx10-HiTEMP
WaveLink Temperature Extension cables for Dx10.Includes 1 set of matched 30" high temperature cables, 1 solder tip lead set
Dx10-SI-HiTEMP
Replacement Solder tip leadset for use with D410/D610 and temperature extension cables
Dx20-HiTEMP
WaveLink Temperature Extension cables for Dx20.Includes 1 set of matched 30" high temperature cables, 1 solder tip lead set
Dx20-SI-HiTEMP
Replacement Solder tip leadset for use with D420/620 and temperature extension cables
Dxx0-Cable-HiTemp
Replacement 30" matched cable set for use with HiTemp Solder tip leadset
LPA-SMA-A
Pro-Link to SMA Adapter, new style
LPA-SMA-KIT-A
Kit of Pro-Link to SMA Adapter, new style
PACC-ZD001
Y lead Adapter for ZD differential probes - Qty 1
PACC-ZD002
Solder-in lead for ZD differential probe - QTY 2
PACC-ZD003
Long spring ground for ZD differential probe - QTY 2
PACC-ZD004
Tip saver for ZD differential probe - QTY 2
PACC-ZD005
Swivel tip adapter for ZD differential probe - QTY 1
PACC-ZD006
Small IC adapter for ZD differential probe - QTY 2
PACC-ZD007
Replacement Accessory kit for ZD200

Transmission Line Probes

PP066
7.5 GHz low capacitance Passive Probe, 500/1K Ohms