Teledyne LeCroy Adds UniPro Protocol Decoding to MIPI Test Toolset
Chestnut Ridge, NY, July 21, 2015 – Teledyne LeCroy today announced the addition of UNIPRObus D, a MIPI UniPro Protocol Decode solution, to its oscilloscope-based MIPI capabilities. UNIPRObus D provides customers with easy-to-use debug of their UniPro signals. Similar to existing MIPI MPHY decoding capability, UniPro Decode supports HS GEAR1, GEAR2 and GEAR3, and PWM Mode (G0-G7) signaling for comprehensive data rate coverage.
Along with the most intuitive method of displaying decoded data, Teledyne LeCroy UNIPRObus D offers the ability to decode UNIPRO signals across four lanes. These four lanes can be a combination of simultaneous up- and/or downstream data. Uniquely to the Teledyne LeCroy solution, decoded data can also be seen in two interactive color-coded tables, providing both frame-level and symbol-level information. Touching a frame in the table correlates it with the annotated waveform, and automatically zooms in to show greater detail.
Comprehensive MIPI Test Toolset
The UNIPRObus D decode package joins a comprehensive and growing set of MIPI analysis, conformance, and debug tools available for Teledyne LeCroy oscilloscopes. Protocol decode packages are available for UniPro, M-PHY, D-PHY, and DigRF 3G and v4, while the unique MPHYbus DP and DPHYbus DP software packages enable seamlessly-integrated physical layer analysis and protocol decodes of MIPI M-PHY and D-PHY signals.
Teledyne LeCroy offers end-to-end conformance test capabilities for MIPI protocols. QPHY-MIPI-MPHY and QPHY-MIPI-DPHY software options perform fully automated M-PHY and D-PHY transmitter testing and report generation using Teledyne LeCroy's user-friendly QualiPHY environment running directly on the oscilloscope. And the Teledyne LeCroy PeRT3 (Protocol-enabled Receiver and Transmitter Tolerance Tester) offers MIPI M-PHY receiver test capability for all high-speed and PWM GEARs, including auto-calibration and margin testing for high-speed GEARs.
For higher-level protocol analysis, the Teledyne LeCroy Eclipse X34 is a highly-portable and comprehensive analysis tool to display and analyze M-PHY data traffic. The Eclipse X34 supports a growing number of higher-level protocols including mPCIE and SSIC, running at PWM GEARS 0-7 and HS GEARs 1-3 at up to x4 lane width. The challenges of probing have been addressed through a wide variety of probing connectivity options, including SMA, multi-lead solder- down tapping, M.2 form factor interposer and a special mid-bus probe designed for M-PHY.
Pricing and Availability
UNIPRObus D has a US List price of $3,000, and is available on a wide variety of Teledyne LeCroy oscilloscopes. Teledyne LeCroy oscilloscope users who have already purchased MPHYbus D or MPHYbus DP options can upgrade to the capability of UNIPRObus D at a US List price of $1,500 – the part number is UPG-MPHY-UNIPRObus D for new customers, or RK-UPG-MPHY-UNIPRObus D for existing oscilloscope owners.
UNIPRObus D is available on WaveRunner 6Zi, WavePro 7Zi, WaveMaster 8Zi, LabMaster 9Zi and LabMaster 10Zi oscilloscopes with 4 GHz or higher bandwidth, running firmware version 7.8.x or later.
About Teledyne LeCroy
Teledyne LeCroy is a leading manufacturer of advanced test instruments that measure, analyze, and verify complex electronic signals. The Company offers high-performance oscilloscopes and protocol test solutions used by electronic design engineers in a wide range of application and end markets. Teledyne LeCroy is based in Chestnut Ridge, N.Y. For more information, visit Teledyne LeCroy's website at teledynelecroy.com.
About MIPI Alliance
MIPI (MIPI®) Alliance is a global, collaborative organization comprised of companies spanning the mobile ecosystem that are committed to defining and promoting interface specifications for mobile devices. MIPI Specifications establish standards for hardware and software interfaces which drive new technology and enable faster deployment of new features and services across the mobile ecosystem.
MIPI® Alliance, DigRFSM , UniProSM, M-PHY®, and SLIMbus® are registered marks of MIPI Alliance, Inc.
© 2015 by Teledyne LeCroy. All rights reserved. Specifications are subject to change without notice.
Editors' Technical contact:
Kathleen Woods, Marketing Communication Manager
Patrick Connally, Product Marketing Manager
Teledyne LeCroy Customer Care Center