Products
Oscilloscope Probes

OE6250G-M

O-E converter, 25 GHz Bessel-Thomson response, 36 GHz flat response


    Optical to Electrical Converters


OE425 - Optical-to-Electrical Converter, 500-870 nm ProBus BNC Connector
OE455 - Optical-to-Electrical Converter, 950-1630 nm ProBus BNC Connector
OE525 - Optical-to-Electrical Converter, 500-870 nm ProLink BMA Connector
OE555 - Optical-to-Electrical Converter, 950-1630 nm ProLink BMA Connector
OE6250G-M - O-E converter, 25 GHz Bessel-Thomson response, 36 GHz flat response
OE695G - Optical to Electrical Converter
These wide- band multi-mode optical-to-electrical converters are designed for measuring optical communications signals. They connect to Teledyne LeCroy real-time oscilloscopes and provide capability for physical layer signal assessment using a variety of oscilloscope tools, such as SDAIII-CompleteLinQ Serial Data Eye, Jitter, Noise and Crosstalk Analysis, mask testing, serial triggering and decoding, and other compliance and debug tools. Maximum data rate test capability is >11.317 Gb/s with reference receiver, or 12.5 Gb/s without.

The OE6250G-M optical-to-electrical converter enables measurement of intensity-modulated optical signals up to 28 Gbaud and beyond on LabMaster or WaveMaster series real-time oscilloscopes. As a fully calibrated module, the OE6250G-M integrates seamlessly into the oscilloscope software to give optical intensity measurement straight out of the box. Teledyne LeCroy’s extensive toolset includes powerful analysis tools for NRZ, PAM4, and other signal types, and enables custom signal processing and reference receiver implementation.

Key Features
  • Optical-to-electrical converter for intensity-modulated signals to 28 Gbaud and higher
  • Up to 36 GHz bandwidth in flat frequency response mode
  • Up to 25 GHz bandwidth in 4th-order Bessel-Thomson frequency response mode
  • DC-coupled detector for accurate signal reproduction with a real-time oscilloscope
  • Fully calibrated and integrated 50/125 μm multi-mode fiber input
  • Ideal for Eye Mask, Extinction Ratio, and Optical Modulation Amplitude (OMA) testing
  • Compatible with Teledyne LeCroy WaveMaster 8 Zi and LabMaster 10 Zi oscilloscope families

 

High-bandwidth Optical Performance

With up to 36 GHz of optical bandwidth, the OE6250G-M has the high performance necessary to acquire NRZ and PAM4 signals at 28 Gbaud and higher. As a fully calibrated optical-to-electrical converter, the OE6250G-M’s response characteristics are combined with those of the oscilloscope, and compensated to an ideal response throughout the measurement system.

A Complete Measurement Toolset

The OE6250G-M enables high-speed optical signals to be analyzed using Teledyne LeCroy’s industry-leading software and solutions toolset. Apply software clock-recovery using standard or custom PLL types, and analyze up to four NRZ signals simultaneously with eye diagrams, jitter and noise analysis, and extensive visualization options. Or leverage the PAM4 Signal Analysis package, with the most sophisticated eye, jitter and noise analysis available.

Analog Bandwidth25 GHz (Bessel-Thomson response mode), 36 GHz (Flatness response mode)
Wavelength Range830nm - 1600nm
Calibration Wavelengths850nm, 1310nm, 1550nm
Conversion gain at 850nm-80 V/W
Conversion gain at 1310nm-125 V/W
Conversion gain at 1550nm-125 V/W
Electrical output couplingDC coupled
5% compression point at 1550nm4 mW (minimum)
Noise measured up to 50GHz500 uV RMS
Optical Return Loss19 dB
Polarization dependent loss at 1550 nm0.1 dB
RF impedance50 Ω
Fiber (core/cladding)50/125 µm
RF connector2.92 mm
Optical ConnectorFC/PC or SC/PC

WaveMaster / SDA / DDA 8 Zi-B Oscilloscopes


  Learn More
LabMaster 10 Zi-A Oscilloscopes


  Learn More