Products
Oscilloscope Probes

CP031

30 Amps, 100 MHz BW Current Probe - AC/DC , 50 Amp Peak Pulse


    Current Probes


CP030 - 30A, 50 MHz Current Probe - AC/DC, 30 A rms, 50 A Peak Pulse, 1.5 meter cable
CP030-3M - 30 A, 10 MHz Current Probe - AC/DC, 30 A rms, 50 A Peak Pulse, 3 meter cable
CP030A - 30A, 50 MHz High Sensitivity Current Probe - AC/DC, 30 A rms, 50 A Peak Pulse, 1.5 meter cable
CP031 - 30A, 100 MHz Current Probe - AC/DC, 30 A rms, 50 A Peak Pulse, 1.5 meter cable
CP031A - 30A, 100 MHz High Sensitivity Current Probe - AC/DC, 30 A rms, 50 A Peak Pulse, 1.5 meter cable
CP150 - 150 A, 10 MHz Current Probe - AC/DC, 150 A rms, 500 A Peak Pulse, 2 meter cable
CP150-6M - 150 A, 5 MHz Current Probe - AC/DC, 150 A rms, 500 A Peak Pulse, 6 meter cable
CP500 - 500 A, 2 MHz Current Probe - AC/DC, 500 A rms, 700 A Peak Pulse, 6 meter cable
CA10 - Programmable Current Sensor to ProBus Adapter for use with third party current sensors
CA10-QUADPAK - Set of 4 CA10 Programmable Current Sensor to ProBus Adapters for third-party current sensors
DCS015 - Deskew Calibration Source for CP031,CP031A, CP030, CP030A and AP015
Current Probes

Teledyne LeCroy current probes are available in a variety of models for a wide range of applications. The full range of Teledyne LeCroy current probes includes models with bandwidths up to 100 MHz, peak currents up to 700 A and sensitivities to 1 mA/div. Teledyne LeCroy current probes are often used in applications such as the design and test of switching power supplies, motor drives, electric vehicles, and uninterruptible power supplies.

  • CP030 - 30A, 50MHz Current Probe
  • CP030A - 30A, 50MHz High Sensitivity Current Probe
  • CP031 - 30A, 100MHz Current Probe
  • CP031A - 30A, 100MHz High Sensitivity Current Probe
  • CP150 - 150 A, 10 MHz Current Probe - AC/DC, 150 A rms, 500 A Peak Pulse
  • CP500 - 500 A, 2 MHz Current Probe - AC/DC, 500 A rms, 700 A Peak Pulse
  • DCS015 - Deskew Calibration Source for CP031,CP031A, CP030, CP030A and AP015

 

Current Sensor Adapter

The CA10 is a programmable and customizable interface device that seamlessly incorporates third party current transducers/transformers with Teledyne LeCroy oscilloscopes or motor drive analyzers. The easy to use interface provides the ability for the CA10 to be programmed to contain the specifications of the current sensor allowing it to automatically correct for the gain or attenuation and display results in Ampere units. This allows the third party device to be recognized and operate as if it were a Teledyne LeCroy probe.

  • CA10 - Programmable ProBus Current Sensor Adapter for use with third party current sensors
  • CA10-QUADPAK - Set of 4 CA10, Programmable ProBus Current Sensor Adapter for use with third party current sensors
Wide Range of Applications

Teledyne LeCroy current probes are available in a variety of models for a wide range of applications. The full range of Teledyne LeCroy current probes includes models with bandwidths up to 100 MHz, peak currents up to 700 A and sensitivities to 1 mA/div. Teledyne LeCroy current probes are often used in applications such as the design and test of switching power supplies, motor drives, electric vehicles, and uninterruptible power supplies.

High Sensitivity

The CP030A and CP031A provide a high sensitivity of 1mA/div. This allows for more precise low current measurements on Teledyne LeCroy oscilloscopes. When used with HDO high definition oscilloscopes with HD4096 technology, users will obtain highly accurate, low current waveforms with unmatched 12-bit resolution for improved debug and analysis.

Fully Integrated

All Teledyne LeCroy current probes are powered through the Teledyne LeCroy ProBus connection and require no additional hardware. Along with providing power, the ProBus connection allows the current probe and oscilloscope to communicate, resulting in current waveforms automatically displayed on screen in Amps, and calculated power traces scaled correctly in Watts. This full integration also allows for the Degauss and Autozero functions to be done directly from the oscilloscope’s user interface.

Deskew Calibration Source

The DSC015 deskew calibration source has both voltage and current time-aligned signals, which enables the precise deskew of voltage and current probes. Most voltage probes along with the CP030, CP030A, CP031, and CP031A are compatible with the DSC015.

ModelMax Continuous Input CurrentMax Peak CurrentBandwidthMinimum SensitivityCouplingMax Conductor Size (diameter)Interface
CP03030A50A50 MHZ10mA/divAC, DC, GND5mmProbus, 1MΩ only
CP030A30A50A50 MHZ1mA/divAC, DC, GND5mmProbus, 1MΩ only
CP03130A50A100 MHZ10mA/divAC, DC, GND5mmProbus, 1MΩ only
CP031A30A50A100 MHZ1mA/divAC, DC, GND5mmProbus, 1MΩ only
AP01530A50 A50 MHz10 mA/divAC, DC, GND5 mmProbus, 1MΩ only
CP150150 A500 A10 MHz100 mA/divAC, DC, GND20 mmProbus, 1MΩ only
CP500500 A700 A2 MHz100 mA/divAC, DC, GND20 mmProbus, 1MΩ only

Electrical Characteristics

Bandwidth (Probe Only) 100 MHz
Coupling AC 1 MΩ, DC 1MΩ, GND
Risetime (typical) 3.5 ns
Max Continuous Input Current 30 A
Max Peak Current
(non-continous)
50 A
Minimum Sensitivity 10 mA/div
Amplitude Accuracy ±1% of reading to 30 A
±2% of reading to 50 A
Maximum Circuit Voltage 300 V, CAT I
(Insulated Wire)
 

Environmental and Safety

Operating Temperature 0 °C to 40 °C
Humidity ≤ 80 % relative humidity
(non-condensing) 
Storage Temperature -10 °C to 50 °C
Max Altitude 2000 m
 

Physical Dimensions

Probe Head Dimensions (L x W x H) 175 mm x 18 mm x 40 mm
Cable Length 1.5 m
Maximum Conductor Size 5 mm
Weight 240 g
 

General Characteristics

Interface ProBus
 

WaveSurfer 10 Oscilloscope

WaveSurfer 10
  Learn More
WaveSurfer 510 Oscilloscope

WaveSurfer 510
  Learn More
HDO4000A High Definition Oscilloscopes


  Learn More
WaveRunner 8000 Oscilloscopes


  Learn More
HDO6000A High Definition Oscilloscopes


  Learn More
HDO8000A High Definition Oscilloscopes


  Learn More
MDA800A Motor Drive Analyzers


  Learn More
WaveMaster / SDA / DDA 8 Zi-B Oscilloscopes


  Learn More