ZD200

200 MHz, 3.5 pF, 1 MOhm Active Differential probe

Differential Probes (<= 1.5 GHz)

AP033 - 500 MHz Differential Probe

ZD1000 - 1 GHz, 1.0 pF Active Differential Probe, ±8 V

ZD1500 - 1.5 GHz, 1.0 pF Active Differential Probe, ±8 V

ZD200 - 200 MHz, 3.5 pF, 1 MOhm Active Differential Probe, ±20 V Limited Availability

ZD500 - 500 MHz, 1.0 pF Active Differential Probe, ±8 V

Fully Integrated

With the ProBus interface, the ZD200 becomes an integral part of the oscilloscope. The probe sensitivity and offset are automatically optimized based on the oscilloscope gain settings, so control is transparent to the user. When used with a LeCroy digital oscilloscope, no external power supply is required.

Wide Dynamic Range

The ZD200 probes provide a wide dynamic range of ±20 V and a common mode range of ±60 V to allow a broad application use.

A Variety of Probe Tips for Varied Tasks

Engineers often need to probe a variety of different test points in confined spaces. The extensive range of standard and optional tip accessories for the ZD200 Series of probes ensures that this probe can meet any difficult probing challenge. Innovative Probe Leads and Tips Provide Excellent

Signal Performance Without Degradation

Probing with long leads or accessories is sometimes necessary to reach the test points, but it comes at the expense of reduced bandwidth, increased capacitance, and added noise. The ZD200 accessories are engineered to provide the best signal fidelity and minimize peaking and other undesirable effects often introduced with probe tips and leads.