DDR3
|
|
The Kibra 380 is the first standalone DDR3 bus analyzer designed specifically to overcome the cost and complexity of monolithic test approaches that rely on logic analyzer platforms. Fully self-contained, the Kibra 380 uses non-intrusive interposer probes to transparently monitor DDR3 transactions on a live system. With no calibration required, the Kibra 380 provides complete visibility to DDR3 command and timing intervals allowing developers to verify compliance with the JEDEC specification.
|
| |
|
The Kibra 380 is a stand-alone DDR3 protocol analyzer that provides comprehensive DDR3 bus and JEDEC timing analysis.
|
|
DDR3 & DDR4
|
|
Teledyne LeCroy's pioneering approach to serial data presentation has benefited developers of computer systems and peripherals for over 15 years. With its introduction of a new low-cost test platform for DDR3 & DDR4, Teledyne LeCroy now brings its high-speed probing and analysis expertise to developers of high performance memory systems.
|
| |
|
The Kibra 480 Compliance System provides DDR memory developers, implementers and integrators a cost effective solution to verify and validate that their DDR memory solution meets JEDEC compliance parameters. Kibra 480 supports either DDR3 or DDR4. The quick and easy hardware setup and immediate feedback on violations allow users to quickly validate their memory system meets JEDEC timing compliance or swiftly identify problem areas with their memory system. Capturing the Command Address and Control bus, the Kibra 480 can quickly identify timing issues associated with the JEDEC defined speed bins.
|
| |
| |
|
The Kibra 480 is a stand-alone protocol analyzer that provides comprehensive bus and JEDEC timing analysis for DDR3 and DDR4. Sitting in-line on a live system, the analyzer uses a proprietary probe implementation to allow loss-less capture of high speed DDR transactions while automatically identifying timing and protocol violations.
|
|
Embedded Instruments
|
|
Increasing complexity, speed and shrinking form factors has introduced post silicon validation and debug challenges as traditional tools continue to lose visibility. Embedded Instrument solutions from Teledyne LeCroy address these challenges and offer a time-to-market advantage to our users. By embedding debug hooks into your silicon and utilizing advanced software viewing techniques users will gain valuable visibility at the chip and system levels. Debug and validation is further enhanced by utilizing Teledyne LeCroy's CrossSync capability to time correlate.
|
| |
|
The Teledyne LeCroy IOTA Software Suite is designed to work with Intel's next generation processors supporting Intel Silicon View Technology™ (SVT). This brings Teledyne LeCroy's world class protocol viewing and intuitive user interface to internal trace data from various sources as defined by Intel. The internal trace data is extracted from the system using the Intel provided pod and is fully decoded, time correlated and viewed using Teledyne LeCroy's IOTA Software Suite advanced visualization and analysis software.
|
| |
| |
|
Post silicon validation and debug accounts for a growing bottleneck in time-to-market due to continuing increases in system complexity and a loss of visibility. Teledyne LeCroy's InSight Technology consists of a set of modular components designed to be used individually or as a turn-key solution. With InSight Technology, signal capture IP along with advanced viewing techniques and data storage options come together to offer enhanced validation and debug for chip and system level test.
|
|
Ethernet
|
|
Ethernet, as the most common communication protocol on the planet, continues to spread into new markets and incorporates new protocols; it presents today’s Ethernet engineers with host of new test and validation challenges. Specifically, the increasing adoption of lossless Ethernet standards like FCoE, RoCE, and NVMf to name a few; increases in the line-rates of Ethernet now up to 100Gb/s; and new physical and logical communications standards to support these technologies and speeds; legacy test tools are outdated and ineffective for Ethernet product developers and the ecosystem. Teledyne LeCroy is addressing these needs by leveraging our extensive experience in high-speed serial data analysis tools currently used by many of the same companies developing products for NAS, SAN, LAN, and other high-speed protocol environments.
|
| |
|
The SierraNet T328 system provides 25/50/100Gbp/s Ethernet and Gen 6 (32/128G) Fibre Channel data capture and protocol verification for developers & protocol test engineers in LAN, SAN, NAS and other Ethernet and Fibre Channel applications. Available with eight SFP28 FlexPorts™ for maximum configuration and utility, the SierraNet T328 offers world-class protocol analysis capabilities with an easy to use, customizable hardware & software interface, large capture buffers, and the most advanced T.A.P3 capture, triggering and filtering capabilities in the industry.
|
| |
| |
|
The SierraNet M408 is the most cost effective, advanced and fully integrated 10/40Gbps Ethernet and 16G Fibre Channel data capture and protocol verification systems available for developers and protocol test engineers. The SierraNet M408 supports Ethernet protocol analysis and error injection capabilities in a single platform and provides engineers with 100% recording of all Fibre Channel and Ethernet related traffic at full line rates on all ports while maintaining the link integrity through non-retimed pass-through probe technology.
|
| |
| |
|
The SierraNet M168 system provides 10Gbps Ethernet and 16G Fibre Channel data capture and protocol verification for developers & protocol test engineers in LAN, SAN, other Ethernet and Fibre Channel applications. Available with eight SFP+ FlexPortsTM for 10Gbps Ethernet and 16G Fibre Channel, the SierraNet offers world-class protocol analysis capabilities with an easy to use, customizable hardware & software interface, large capture buffers, and the most advanced triggering and filtering capabilities in the industry.
|
|
Fibre Channel
|
|
Fibre Channel is a networking standard used primarily as the infrastructure for storage area networks (SAN) in enterprise data centers. Fibre Channel has 80%+ market share in the Storage Area Networking space and will see continued development and use for many years to come. 8GFC, the latest shipping version of Fibre Channel, and future Fibre Channel related standards will continue to serve applications where the need for higher network bandwidth continues to grow at exponential rates.
|
| |
|
The SierraNet T328 system provides 25/50/100Gbp/s Ethernet and Gen 6 (32/128G) Fibre Channel data capture and protocol verification for developers & protocol test engineers in LAN, SAN, NAS and other Ethernet and Fibre Channel applications. Available with eight SFP28 FlexPorts™ for maximum configuration and utility, the SierraNet T328 offers world-class protocol analysis capabilities with an easy to use, customizable hardware & software interface, large capture buffers, and the most advanced T.A.P3 capture, triggering and filtering capabilities in the industry.
|
| |
| |
|
The SierraNet M408 is the most cost effective, advanced and fully integrated 10/40Gbps Ethernet and 16G Fibre Channel data capture and protocol verification systems available for developers and protocol test engineers. The SierraNet M408 supports Ethernet protocol analysis and error injection capabilities in a single platform and provides engineers with 100% recording of all Fibre Channel and Ethernet related traffic at full line rates on all ports while maintaining the link integrity through non-retimed pass-through probe technology.
|
| |
| |
|
The SierraNet M168 system provides 10Gbps Ethernet and 16G Fibre Channel data capture and protocol verification for developers & protocol test engineers in LAN, SAN, other Ethernet and Fibre Channel applications. Available with eight SFP+ FlexPortsTM for 10Gbps Ethernet and 16G Fibre Channel, the SierraNet offers world-class protocol analysis capabilities with an easy to use, customizable hardware & software interface, large capture buffers, and the most advanced triggering and filtering capabilities in the industry.
|
|
MIPI
|
|
The M-PHY specification from the MIPI Alliance provides flexibility and speed for developers in the mobile computing market. The technology is aimed at next generation smart phones, tablets and other low power mobile computing devices. The M-PHY currently runs at GEARs 1/2/3 per lane in each direction, providing asymmetrical lane operation for up to 4-lane device configurations.
|
| |
|
The Teledyne LeCroy Eclipse MIPI M-PHY protocol analyzer is for customers developing M-PHY GEAR 1/2/3 at up to x4 lane width. Supporting MPCIe and SSIC, this protocol analyzer is the first to support the PCIe 3.1 specification. M-PCIe combines the PCI Express (PCIe) protocol layer with the low power M-PHY physical layer bringing high-end PCIe performance and software capabilities to low power mobile devices. SSIC is the USB-IF specification for SuperSpeed Interchip protocol and runs 5Gps USB traffic over the MIPI MPHY bus.
|
|
NVM Express
|
|
NVM Express is a scalable host controller interface designed to address the needs of Enterprise, Data Center and Client systems for supporting chip-to-chip, board-to-board, adapter and distance solutions. The protocol can efficiently use interconnect and fabric technologies such as PCI Express, Ethernet and Fibre Channel. Teledyne LeCroy provides protocol analysis, emulation, exerciser and other test equipment to service all NVMe storage applications.
|
| |
|
The Summit T3-16 Protocol Analyzer captures, decodes and displays PCIe 3.0 protocol traffic.data rates for x1, x2, x4, x8, x16 lane widths
|
| |
| |
|
The Summit T3-8 Protocol Analyzer captures, decodes and displays PCIe 3.0 protocol traffic.data rates for x1, x2, x4, x8 lane widths
|
| |
| |
|
The Summit T34 Protocol Analyzer captures, decodes and displays PCIe 3.0 protocol traffic data rates for x1, x2, x4 lane widths
|
| |
| |
|
The Summit T28 Protocol Analyzer captures, decodes and displays PCIe 2.5GT/s and 5GT/s data rates for x1, x2, x4, x8 lane widths
|
| |
| |
|
The Teledyne LeCroy Summit T24 PCI Express analyzer is for customers developing PCIe 1.0 or 2.0 x4 lane width server, workstation, desktop, graphics, storage, and network card applications.
|
| |
| |
|
The Summit Z3-16 with SMBus Support is a critical test and verification tool intended to assist engineers in developing and improving the reliability of their systems. The exerciser can emulate PCI Express root complexes or device endpoints, allowing new designs to be tested against corner case issues. In addition, it can emulate SMBus traffic as a master or slave.
|
| |
| |
|
The BitTracer Logic Display is a software option that runs on the Teledyne LeCroy Summit PCI Express Protocol Analyzers. BitTracer offers developers a physical layer view of PCI Express traffic, similar to what might be displayed on a logic analyzer, but provides this capability on a protocol analyzer. This means that developers can view bit stream traffic before it is decoded to high-level packets, to better understand where signal integrity issues may be causing data corruption.
|
| |
| |
|
Teledyne LeCroy offers an integrated and automated compliance testing system, including the Protocol Test Card Platform, approved by the PCI-SIG as a standard tool for compliance testing for developers working with the PCIe 3.0 specification.
|
| |
| |
|
Teledyne LeCroy has been an industry leader in storage protocol analysis. The storage SSD/Drive technology is now moving towards a PCI Express host based interface. Teledyne LeCroy supports the following:
-NVM Express
-SCSI Express
-SATA Express
|
| |
| |
|
The Summit Z3-16 Test Platform with SMBus Support allows the Summit Z3-16 to act as a host emulator, and provides a general purpose test backplane and interposer for testing Gen3, Gen2 or Gen1 hosts and devices. In addition, it supports the Summit Z3-16 with SMBus Support by providing SMBus tapping connectivity.
|
| |
| |
|
The Teledyne LeCroy PXP-100B Test Platform provides a convenient means for testing PCIe cards with a self-contained portable and powered passive backplane. The PXP-100B provides power required for both cards under test, and an interposer can be used for connection to a protocol analyzer.
|
|
PCI Express
|
|
PCI Express (PCIe) has become the leading interconnect technology to succeed the Peripheral Connect Interface (PCI) architecture.The PCI Express(PCIe) architecture retains the PCI usage model and software interfaces for investment protection and smooth development migration. The technology is aimed at multiple market segments in the computing and communication industries, and supports chip-to-chip, board-to-board and adapter solutions. PCI Express 4.0 currently runs at 16GT/s or 16GBps per lane in each direction, providing a total bandwidth of 64GBps in a 16-lane configuration which is the largest size in use.
|
| |
|
The Summit Z416 is a PCIe 4.0 protocol traffic generation test tool used for critical test and verification intended to assist engineers in developing and improving the reliability of their systems. The Summit Z416 can emulate PCI Express 4.0 root complexes or device endpoints, allowing new designs to be tested against corner case issues.
|
| |
| |
|
The Summit T3-16 Protocol Analyzer captures, decodes and displays PCIe 3.0 protocol traffic.data rates for x1, x2, x4, x8, x16 lane widths
|
| |
| |
|
The Summit T3-8 Protocol Analyzer captures, decodes and displays PCIe 3.0 protocol traffic.data rates for x1, x2, x4, x8 lane widths
|
| |
| |
|
The Summit T34 Protocol Analyzer captures, decodes and displays PCIe 3.0 protocol traffic data rates for x1, x2, x4 lane widths
|
| |
| |
|
The Summit T28 Protocol Analyzer captures, decodes and displays PCIe 2.5GT/s and 5GT/s data rates for x1, x2, x4, x8 lane widths
|
| |
| |
|
The Teledyne LeCroy Summit T24 PCI Express analyzer is for customers developing PCIe 1.0 or 2.0 x4 lane width server, workstation, desktop, graphics, storage, and network card applications.
|
| |
| |
|
The Summit Z3-16 with SMBus Support is a critical test and verification tool intended to assist engineers in developing and improving the reliability of their systems. The exerciser can emulate PCI Express root complexes or device endpoints, allowing new designs to be tested against corner case issues. In addition, it can emulate SMBus traffic as a master or slave.
|
| |
| |
|
The Teledyne LeCroy Protocol Test Card (PTC) is a multimodal test board used for checking adherence to the protocol-oriented sections of the PCI Express 2.0 specification.
|
| |
| |
|
The BitTracer Logic Display is a software option that runs on the Teledyne LeCroy Summit PCI Express Protocol Analyzers. BitTracer offers developers a physical layer view of PCI Express traffic, similar to what might be displayed on a logic analyzer, but provides this capability on a protocol analyzer. This means that developers can view bit stream traffic before it is decoded to high-level packets, to better understand where signal integrity issues may be causing data corruption.
|
| |
| |
|
Teledyne LeCroy offers an integrated and automated compliance testing system, including the Protocol Test Card Platform, approved by the PCI-SIG as a standard tool for compliance testing for developers working with the PCIe 3.0 specification.
|
| |
| |
|
The Summit product family includes a wide variety of Interposer systems, designed to reliably capture serial data traffic while minimizing perturbations in the serial data stream. Probes include interposers, which are designed to capture data traffic crossing the PCI Express card connector interface, and MidBus probes, which are designed to capture traffic flowing within a PCB.
|
| |
| |
|
Teledyne LeCroy has been an industry leader in storage protocol analysis. The storage SSD/Drive technology is now moving towards a PCI Express host based interface. Teledyne LeCroy supports the following:
-NVM Express
-SCSI Express
-SATA Express
|
| |
| |
|
TeleScan PE is a no-cost PCI Express/NVMe configuration space Read/Write utility that allows the user to scan, decode, display and write to the PCI Express/NVMe configuration space registers.
|
| |
| |
|
The Summit Z3-16 Test Platform with SMBus Support allows the Summit Z3-16 to act as a host emulator, and provides a general purpose test backplane and interposer for testing Gen3, Gen2 or Gen1 hosts and devices. In addition, it supports the Summit Z3-16 with SMBus Support by providing SMBus tapping connectivity.
|
| |
| |
|
The Teledyne LeCroy PXP-100B Test Platform provides a convenient means for testing PCIe cards with a self-contained portable and powered passive backplane. The PXP-100B provides power required for both cards under test, and an interposer can be used for connection to a protocol analyzer.
|
|
SAS (Serial Attached SCSI)
|
|
Serial Attached SCSI (SAS) is a data transfer technology designed to move data to and from storage devices such as disk drives, host bus adapters (HBA), and expanders. SAS is a serialized enhancement and replacement to parallel SCSI. Since SAS ratification in 2004, and it’s move to 6Gbps in 2008, Teledyne LeCroy has continued to support and innovate with it’s industry leading protocol analysis and traffic generation capabilities.
|
| |
|
The SAS Sierra M124A Protocol Test System is Teledyne LeCroy's 7th generation protocol analyzer system that provides 100% accurate protocol capture of both SAS (SAS 3.0) and SATA (SATA 3.0). The industry's most widely used test platform for SAS and SATA features unmatched analysis and debug capabilities to help pinpoint problems at every layer of the protocol.
|
| |
| |
|
The SAS Sierra M122A Protocol Test System is Teledyne LeCroy's 7th generation protocol analyzer system that provides 100% accurate protocol capture of both SAS (SAS 3.0) and SATA (SATA 3.0). The industry's most widely used test platform for SAS and SATA features unmatched analysis and debug capabilities to help pinpoint problems at every layer of the protocol.
|
| |
| |
|
The Sierra Protocol Test System is the 6th generation in the leading line of SAS/SATA protocol test solutions from the leading manufacturer of protocol test systems. Designed for the current evolution of both SAS (SAS 2.0) and SATA (SATA 3.0), the new Sierra product family sets new standards for performance while incorporating a complete range of features in a single, economical system.
|
| |
| |
|
The Sierra Protocol Test System is the 6th generation in the leading line of SAS/SATA protocol test solutions from the leading manufacturer of protocol test systems. Designed for the current evolution of both SAS (SAS 2.0) and SATA (SATA 3.0), the new Sierra product family sets new standards for performance while incorporating a complete range of features in a single, economical system.
|
| |
| |
|
The portable single port multifunctional analyzer system for SAS2 and SATA (6G)
|
|
SATA (Serial ATA)
|
|
Serial ATA (SATA) is a data transfer technology designed to move data to and from storage devices such as disk drives, ATAPI drives, host bus adapters (HBA), and port multipliers. SATA is a serialized enhancement and replacement to parallel IDE. Since SATA ratification in 2003 and its move to 6Gbps in 2008, Teledyne LeCroy has continued to support and innovate with its industry leading protocol analysis and traffic generation capabilities.
|
| |
|
The Sierra Protocol Test System is the 6th generation in the leading line of SATA protocol test solutions from the leading manufacturer of protocol test systems. Designed for the current evolution of SATA (SATA 3.0), the new Sierra product family sets new standards for performance while incorporating a complete range of features in a single, economical system.
|
| |
| |
|
The Sierra Protocol Test System is the 6th generation in the leading line of SATA protocol test solutions from the leading manufacturer of protocol test systems. Designed for the current evolution of SATA (SATA 3.0), the new Sierra product family sets new standards for performance while incorporating a complete range of features in a single, economical system.
|
| |
| |
|
SATA Protocol Test System
|
|
SimPASS Software
|
|
SimPASS allows RTL simulation vector files (that describe PCI Express data traffic in the pre-silicon phase) to be displayed and analyzed in the same way as hardware-derived trace files in the post-silicon phase. By extracting features that show potential flaws in data and transaction packets from the data stream, SimPASS enables developers to more completely test and debug the logic design before committing the design to silicon, a major advance in eliminating design flaws that can cause expensive and time-consuming redesign.
|
| |
|
SimPASS allows RTL simulation vector files (that describe PCI Express data traffic in the pre-silicon phase) to be displayed and analyzed in the same way as hardware-derived trace files in the post-silicon phase. By extracting features that show potential flaws in data and transaction packets from the data stream, SimPASS enables developers to more completely test and debug the logic design before committing the design to silicon, a major advance in eliminating design flaws that can cause expensive and time-consuming redesign.
|
|
USB
|
|
Since the introduction of USB in 1995, Teledyne LeCroy has been a leading provider of verification tools used to debug and test USB semiconductors, devices, and software. Offering both analyzer and exerciser capabilities, the Teledyne LeCroy systems help developers avoid costly interoperability problems by quickly identifying issues and verifying compliance with the specification.
|
| |
|
The Voyager M310C is Teledyne LeCroy’s USB protocol verification system designed for the latest evolution of universal serial bus, USB Type-C, and includes support for USB Power Delivery. Leveraging Teledyne LeCroy’s extensive expertise in high-speed serial data analysis, the Voyager M310C provides traffic generation and recording of USB 3.1, 3.0 and 2.0 with data rates up to 10 Gb/s.
|
| |
| |
|
The Voyager M310 is Teledyne LeCroy’s 8th generation USB analyzer platform that provides 100% accurate protocol capture of both USB 2.0, 3.0, and 3.1 at data rates up to 10 Gb/s. The industry’s most widely used USB test platform features the de facto standard CATC Trace display and unmatched analysis capabilities to help pinpoint problems at every layer of the protocol.
|
| |
| |
|
The Voyager M3x is Teledyne LeCroy's 7th generation USB analyzer platform that provides 100% accurate protocol capture of both USB 2.0 and 3.0 at data rates up to 5 Gb/s. The industry's most widely used USB 3.0 test platform features the de facto standard CATC Trace display and unmatched analysis capabilities to help pinpoint problems at every layer of the protocol.
|
| |
| |
|
Teledyne LeCroy’s Advisor T3 is an ultra portable SuperSpeed USB analyzer that delivers market leading accuracy at an extraordinary price. Designed to put precision USB protocol test tools in the hands of every engineer, the Advisor includes all the essential features for SuperSpeed USB debug.
|
| |
| |
|
The Teledyne LeCroy Mercury T2C adds USB Type-C and Power Delivery 2.0 & 3.0 support to the industry's smallest and most affordable hardware-based USB 2.0 protocol analyzer. The Mercury T2C combines the de-facto standard CATC Trace display, USB class decoding and Power Delivery 2.0 & 3.0 support in an analyzer that fits in a shirt pocket.
|
| |
| |
|
The Mercury T2 is the industry's smallest, most affordable hardware-based USB 2.0 protocol analyzer that combines the defacto standard CATC Trace display with powerful analysis features. The pocket-sized Mercury T2 is bus powered and is controlled using any Windows PC. With comprehensive triggering, the Mercury T2 provides much of the same lab quality protocol analysis capabilities offered in Teledyne LeCroy's top-of-the-line USB analyzers.
|
|
