Products
Protocol Analyzers

SAS Sierra M244

The Teledyne LeCroy Sierra M244 is the industry’s first SAS 4.0 protocol analyzer / jammer system for testing next generation storage systems, devices and software.

Explore SAS Sierra M244 Explore SAS Sierra M244
SAS Sierra T244   The Industry's first SAS 4.0 protocol analyzer provides accurate and reliable capture of up to four SAS 24 Gb/s physical links for efficient test and debug of next generation storage systems.
SAS Sierra M244   The industry's first SAS 4.0 protocol analyzer / jammer system for testing next generation storage systems, devices and software.
SAS Sierra M124A   The flagship four port analyzer, exerciser and error injection system provides the most accurate and reliable capture of SAS 12 Gb/s protocol for fast debug, analysis and problem solving.
SAS Sierra M122A   The flagship two port analyzer, exerciser and error injection system provides the most accurate and reliable capture of SAS 12 Gb/s protocol for fast debug, analysis and problem solving.
SAS Sierra M6-2   The flexible two port multifunctional analyzer system for SAS2 and SATA (6G)
SAS Sierra M6-1   The portable single port multifunctional analyzer system for SAS2 and SATA (6G)
Serial Attached SCSI (SAS) is the next-generation replacement of SCSI Ultra320. SAS is a serialized protocol. The serial interface offers several benefits over the existing SCSI parallel bus; allowing for high availability, complex storage topologies, and a lower cost structure.
High Availability: As with SATA, Serial Attached SCSI is a high-speed, point-to-point technology initially designed to operate at speeds up to 6Gb/sec. System designers have found that point-to-point serial connections are inherently more reliable than shared bandwidth parallel connections. As a result, point-to-point serial connections have become the preferred method for implementing high-availability systems. SAS based disk drives are dual ported, taking advantage of this feature. This is a key requirement of high-availability SANs that call for redundant paths to all devices in the system.
Complex Storage Environments: SAS storage environments usually consist of a mixture of disk drives, host bus adapters and expanders. SAS allows for addressing of over 16,000 devices. SAS Expanders are routing devices that forward service requests between the source and destination devices. Expanders can be attached to other expanders, disk drives, and other hosts. An important characteristic of Expanders is their ability to aggregate bandwidth by combining multiple physical links into a "Wide" port. These wide ports can function as intelligent switches and can independently send commands across one physical path with data being returned over a different physical path. This increases the complexity of SAS test and debug because it requires users to monitor multiple links concurrently to record all DWORDs associated with a single SCSI transaction. The usage of expanders also allows for usage of a storage concept called Zoning. Zoning allows administrators to restrict access to devices by other devices. Applications of this include separating storage systems within a company by department.
Lower Cost Structure: Serial Attached SCSI also contains support for SATA drives in its storage environments. This allows support for both enterprise-class performance offered by SAS and low cost storage with SATA drives in the same system. Since the cost of the SAS infrastructure is expected to be comparable to SATA, it is likely that SAS will be the preferred interface. Since both SAS and SATA drives can be used in this environment, it will simplify and standardize the storage infrastructure, allowing for the ability to choose which drive will best fit individual storage needs.
Protocol Analysis
SAS Test and Verification: LeCroy's protocol analysis tools are designed from the ground up to address these unique characteristics of SAS including wide-links and Serial ATA interoperability. Sierra’s analysis and design suites are developed specifically for use with the SAS and SATA protocols, and provide extensive protocol decoding, expert error analysis, and complete user support when decoding and viewing the recorded traffic. This extensive protocol support, combined with the different traffic views, advanced triggering, data filtering, traffic generation, and error injection capability, allows engineers to rapidly become familiar with SAS- and SATA-specific issues, and quickly understand new issues the first time they encounter them. Every engineer becomes a protocol expert with the support of Sierra’s detailed expert analysis.

Designed to address the next evolution of Serial Attached SCSI 4.0, the Sierra M244 is a four-port protocol analyzer that offers a built-in Jammer for testing reliability and error recovery. With full support for 24Gb/s, 12Gfb/s, 6Gb/s and 3Gb/s SAS and SATA traffic, the Sierra M244 operating as an analyzer can record “4-wide” links. When licensed with the Infusion Jammer option, the M244 provides a “real-time” jammer capability to modify or corrupt traffic on 1, 2, or 4 ports simultaneously.

Flexible Hardware

The Sierra platforms feature a fully re-programmable protocol-processing engine that can adapt to changes in the specifications. Future SAS enhancements including “interleaved FEC” and “bit-level re-timers” can be addressed with a simple firmware update. Host connectivity to the Sierra is optimized for fast access to captured traffic and includes both SuperSpeed USB and Gigabit Ethernet. Mini-SAS HD ports allow easy connection to SAS 12 Gb/s as well as future SAS 24Gb/s devices.

Flexible licensing options allow support for dual-port (2) or wide-port (4) links. The M244 can be licensed to support SAS 4.0 or, alternatively, licensed with SAS 3.0 which is field-upgradeable to support 24Gb/s when needed. Memory buffers are shared across all active ports for maximum flexibility. High port count applications are possible (up to 32 physical links) by simply cascading multiple Sierra units together.

Disconnect / Reconnect allows the Sierra system to be armed then disconnected from the host laptop. The analyzer will transparently wait for the trigger condition and preserve captured traffic in memory until the user reconnects to the analyzer. A built-in port provides DC power for target devices to supply SSDs or HDDs with 12v or 5v power. The rear chassis also provides a sync-port capable of synchronizing trace captures from multiple analyzer units, as well as from other protocols, using CrossSync technology.

Expert Analysis Software

Seamlessly integrated with Teledyne LeCroy’s expert analysis software, the Sierra platform overcomes the struggles of legacy debug tools with a revamped graphical interface featuring easy to understand displays of protocol traffic. For viewing commands and frames in sequential order, the Spreadsheet View provides a traditional table format that can be customized to add any field in a separate column. The Exchange level assembles frames and primitives into the logical SCSI commands, data and status transactions. This is critical for wide-port traces where large gaps can occur between command and status.

Use the Exchange View to see SCSI and SAS Management transactions fully decoded including Discovery request/responses, SCSI sense data and ASCQ fields. All of the analysis views can be used simultaneously and are automatically synchronized and displayed within one application. Any combination of display and filtering options can be configured as the default view making it faster to interpret captured traffic. Navigate traces at the logical command level, then easily drill-down to the chronological packet level.

Pinpoint Triggering

The Sierra provides hardware triggering to pinpoint protocol events of interest. Trigger events can be specified at the lowest levels including error conditions, bus states, primitives (SOF, OPEN-REJECT, TRAIN-DONE, etc..), header fields (Tag, LBA, etc…) or payload patterns (CDB, Sense Data, etc…). Users can define sophisticated sequential event trigger scenarios including complex sequences such as timing intervals between events or errors at specific LBAs.

 

Fast Search Tools

The Sierra SAS verification system provides extensive traffic metrics and statistics to help locate and identify protocol issues. Statistical reports provide hyperlinks to events in trace. Navigation in the Spreadsheet View is easy with Quick-Search. Click on any field and navigate forward or backward to the next occurrence. Add Boolean operators to find lower or higher values. Easily search by command, address, tag or status. The Quick Filter uses the same easy mechanism to hide selected fields. Markers can be added, searched and displayed as tooltips.

Integrated Jammer (InFusion) option

Building on the capabilities of the industry's first SAS/SATA error injection system, the InFusion™ option for Sierra M244 can programmatically alter or corrupt traffic for both SAS and SATA protocols. Fully integrated within the SAS4 Protocol Suite, InFusion is designed to create faulty link conditions while the analyzer records the real response from the system-under-test. The InFusion for SAS 4.0 is the ideal tool for stress testing systems while running real traffic and actual workloads.

Impair and Analyze up to 4-wide Links Simultaneously

The Sierra InFusion 24G option on the M244 platform can operate on up to four SAS or SATA links simultaneously. The M244 uses an active repeater front-end allowing it to programmatically alter or corrupt traffic for both SAS 24G and legacy speeds. The system can simultaneously record traffic over the same physical links selected for error injection. By default, the analyzer will use two channels to monitor before and after the error injection (A-J-A mode).

Powerful Error Injection and Traffic Modification Features

Once the Sierra InFusion system has been added to a SAS or SATA link, it automatically passes the boot up sequence and preserves all protocol handshaking between devices. It silently monitors the line while transmitting a faithful copy of the original data stream. The system will wait for a specific time interval or for an event designated by the user before it begins modifying frames or injecting errors. Sierra InFusion can be configured to send a single error, multiple errors, or random errors.

When changing fields within a frame, the Sierra InFusion traffic modifier will preserve the outbound frame structure, including recalculating the FEC and/or CRC if needed. The real response transmitted from the device-under-test will pass through the Sierra system, without modification to allow true end-to-end system testing.

Example Traffic Impairments /Actions
Drop Frame Drop Primitive Capture DWORD
Drop Link Replace Primitive FEC Correctable error
Insert DWORDs Change DWORDs FEC UnCorrectable error
Truncate frame Insert CRC-Error Alter Speed Negotiation
Insert Running Disparity Error Insert Symbol Error Replace Data pattern
Insert Idle Insert Primitive Reject Connection
Corrupt Framing Corrupt Flow control Loop scenario
Corrupt SSP, SMP, STP frame contents Insert Marker Jump to any state
Force Check Condition Count Event Trigger

Sophisticated error injection strategies are possible using the dual sequencers with up to 256 sequential wait states per sequence. Each state can be configured to check for different conditions or inject different errors before branching to the next state. Looping allows the error injection sequence to repeat at specific intervals. Each sequential state can also include timers and counters to better isolate specific link conditions.

A Comprehensive Solution for SAS and SATA

Teledyne LeCroy's Sierra platforms provide the advanced features necessary to ease development and deployment of SAS and SATA solutions. With best-in-class features and an extensible design, the Sierra systems are is well suited for low-level silicon validation as well as system and software level protocol debug.

Host Machine Minimum Requirements; Microsoft Windows 10, Windows 8.1 (x86 and x64), Windows Server 2012 (x64), Windows 7 (x86 and x64), Windows Server 2008R2 (x64); 2 GB of RAM; Storage with at least 600 MB of free space for the installation of the software and additional space for recorded data; display with resolution of at least 1024x768 with at least 16-bit color depth; USB 2.0 port and/or 100/1000baseT Ethernet  For optimal performance, please refer to our recommended configuration in the product documentation.
Recording Memory Size 32 GB or 64 GB
No. of recording channels T244/M244 - Up to 4 ports
Data Rates Supported 24Gb/s, 12 Gb/s 6 Gb/s, 3 Gb/s
Cascadable Up to 32 ports
Host Interface USB 2.0, USB 3.0, 10/100/1000baseT Ethernet
Data Bus connectors Mini-SAS HD ports
Front Panel Connectors Mini-SAS HD Initiator (up to 4 ports), Mini-SAS HD Target (up to 4 ports), External Trigger IN/OUT, USB 3.0 & 10/100/1000 Ethernet Host Interface.
Front Panel Indicators 5 LEDs (Trigger, Error, Link, Speed, Frame/OOB) for each of 4 Initiators and Targets; Status LCD; Power
Rear Panel Connectors AC Power in, DC Power out, SYNC Port
Dimensions Metal Chassis: 392 x 89 x 372 mm; With Bumpers 418 x 98 x 375 mm (16.5” x 14.75” x 3.8”)
Weight 3.6 Kg (8.5 lbs)
Power Requirements 90-254 VAC, 47-63 Hz universal input, 200W maximum
Sierra M244 SAS 4.0 Infusion™ “Jammer” Option

The Sierra M244 InFusion option (jammer) allows on-the-fly error injection for 24Gb/s SAS, as well as legacy speeds. Fully integrated within the M244 analysis platform, InFusion is designed to create faulty link conditions while the analyzer records the real response from the system-under-test. InFusion goes far beyond simple CRC error injection by making it easy to modify bus states, drop, change or insert primitives; modify frames or change data patterns within a payload. InFusion for SAS 4.0 is the ideal tool for stress testing systems while running real traffic and actual workloads.

Once the Sierra InFusion system has been added to a SAS or SATA link, it automatically passes the boot up sequence and preserves all protocol handshaking between devices. It silently monitors the line while transmitting a faithful copy of the original data stream. The system will wait for a specific time interval or for an event designated by the user before it begins modifying frames or injecting errors. Sierra InFusion can be configured to send a single error, multiple errors, or random errors.

In just minutes, Infusion’s drag-and-drop interface makes it easy to create test scenarios. Any primitive or data pattern can be intercepted and changed to a user defined pattern. From dropping entire packets - to changing any field within a frame, the InFusion system can create data integrity or simple handshaking errors. This allows for unprecedented corner case and protocol level stress testing for enterprise storage applications.