Serial Data

MIPI

M-PHY provides a serial interface technology with high bandwidth capabilities, which is particularly developed for mobile applications to obtain low pin count combined with very good power efficiency. It is targeted to be suitable for multiple protocols, including UniProSM and DigRFSM v4, and for a wide range of applications.

Explore MIPI Explore MIPI
Eclipse X34 MIPI M-PHY Protocol Analyzer   The Teledyne LeCroy Eclipse MIPI M-PHY protocol analyzer is for customers developing M-PHY GEAR 1/2/3 at up to x4 lane width. Supporting MPCIe and SSIC, this protocol analyzer is the first to support the PCIe 3.1 specification. M-PCIe combines the PCI Express (PCIe) protocol layer with the low power M-PHY physical layer bringing high-end PCIe performance and software capabilities to low power mobile devices. SSIC is the USB-IF specification for SuperSpeed Interchip protocol and runs 5Gps USB traffic over the MIPI MPHY bus.
UNIPRObus D   The MIPI UniPro Protocol Decoder analyzes acquired M-PHY analog waveforms and provides insight into multiple levels of UniPro protocol information. Data and Control frames are presented in an intuitive table format, where selecting a frame expands its content to a color-coded symbolic level, simultaneously creating a zoom. Decode annotation information is displayed on the physical layer waveform for a quick reference.
QPHY-MIPI-MPHY   The QPHY-MIPI-MPHY Test Solution provides automated control of Teledyne LeCroy oscilloscopes for performing transmitter physical layer tests as described by the MIPI Alliance Specification for M-PHY version 3.0.
D-PHYbus DP - Decode and Physical layer test option   The MIPI M-PHY and D-PHY Decode and Physical Layer Test is the ideal tool for powerful system level protocol debug as well as problem solving for signal quality issues. The D-PHY decode solution adds a unique set of tools to your oscilloscope, simplifying how you design and debug MIPI D-PHY, CSI-2 and DSI signals.
M-PHYbus D - Decode option   The MIPI M-PHY and D-PHY Decode and Physical Layer Test is the ideal tool for powerful system level protocol debug as well as problem solving for signal quality issues. The D-PHY decode solution adds a unique set of tools to your oscilloscope, simplifying how you design and debug MIPI D-PHY, CSI-2 and DSI signals.
M-PHYbus DP - Decode and Physical layer test option   The MIPI M-PHY and D-PHY Decode and Physical Layer Test is the ideal tool for powerful system level protocol debug as well as problem solving for signal quality issues. The D-PHY decode solution adds a unique set of tools to your oscilloscope, simplifying how you design and debug MIPI D-PHY, CSI-2 and DSI signals.
DigRF 3G bus   The DigRF 3G decode is the ideal tool for powerful system level protocol debug as well as problem solving for signal quality issues. The DigRF 3G decode adds a unique set of tools to your oscilloscope, simplifying how you design and debug MIPI digital RF systems.
DigRF v4 bus   The DigRF 3G and v4 decode are the ideal tools for powerful system level protocol debug as well as problem solving for signal quality issues. The DigRF decodes add a unique set of tools to your oscilloscope, simplifying how you design and debug MIPI digital RF systems.
Embedded System Bundle TD   The Embedded Bundle Trigger and Decode (TD) contains the capabilities included in the I2Cbus, SPIbus, and UART-RS232bus TD products. For more information on this product, please see the product pages for I2Cbus TD, SPIbus TD, and UART-RS232bus TD.
Embedded System Bundle TDME   The Embedded Bundle Trigger, Decode, Measure/Graph and Eye Diagram(TDME) contains the capabilities included in the I2Cbus, SPIbus, and UART-RS232bus TDME products. For more information on this product, please see the product pages for I2Cbus TDME, SPIbus TDME, and UART-RS232bus TDME.
QPHY-MIPI-DPHY - D-PHY Compliance Package   Test Solution provides automated control for Teledyne LeCroy oscilloscopes for performing transmitter physical layer tests as described by the MIPI Alliance Specification for D-PHY version 1.00.00
D-PHYbus D - Decode option   The MIPI D-PHY decode is the ideal tool for powerful system level protocol debug as well as problem solving for signal quality issues. The D-PHY decode solution adds a unique set of tools to your oscilloscope, simplifying how you design and debug MIPI D-PHY, CSI-2 and DSI signals.
M-PHY provides a serial interface technology with high bandwidth capabilities, which is particularly developed for mobile applications to obtain low pin count combined with very good power efficiency. It is targeted to be suitable for multiple protocols, including UniProSM and DigRFSM v4, and for a wide range of applications.