販売終了しました。


VBAシリーズ

ビークル・バス・アナライザ

  • 最大4本のCANバスに対するシンボリック(アプリケーション層)デコード（ユーザーのメッセージで表示）
  • CANトリガをシンボリック形式でセットアップ
  • オシロスコープの画面上で波形の上にデコード結果を表示
  • DBCデータベース形式との互換性
  • ゲートウェイ上のタイミング測定 (ゲートウェイ上でCANメッセージ間のタイミングを測定)
  • すべてのCANbus TDM、FlexRay TDP、LINbus TD機能をサポート
  • CANタイミング測定、バス負荷測定
  • FlexRay ver.2.1をサポート
  • LIN ver1.3、2.x、J2602をサポート
  • FlexRayアイパターン、マスク試験とエラーロケータ測定
  • FlexRay物理層計測（伝播遅延、非対称遅延、トランケーション、ジッタ）
  • 最高25Mポイントのメモリで
  • 何千ものCAN、FlexRay、LINbusメッセージを捕捉
　
  • 　
  • 　
  • 　


拡大画像

ビークル・バス・アナライザによる独自の解析

ビークル・バス・アナライザ(VBA)は、CANシリアル・データをシンボリック(アプリケーション層)にデコードできる最初の汎用オシロスコープです。VBAの登場により、エンジニアは初めて、CANプロトコル・スタック情報（シンボリック、16進、電気信号）を全ての層にわたって解析できると同時に、CANに影響を与えるインサーキット電気信号（センサー入力、電圧レベル、過渡電圧など）を詳細に表示できるようになりました。さらに、最大4個の異なるCANの信号を同時にデコードできます。オシロスコープの標準ツールと特殊ツールを使用して、デザインの確認とデバッグを行うこともできます。

ページトップに戻る

高速デバッグを妨げる障壁の除去

意味が分かるシンボリック・デコーディング/トリガリングでは、イベントを高速かつ直感的に分析することが可能です。既存のDBCデータベース･ファイルをオシロスコープに読み込み（データの再入力は不要）、CANメッセージ･トラフィックを捕捉すると、すべての電気信号、プロトコル（16進）情報、シンボリック（アプリケーション層）情報が即座にオシロスコープの画面に表示されます。

オシロスコープの標準ツールとVBAの特殊ツールを使用して、希なイベントの検出、測定の自動実行とイベント・タイミングの統計解析、情報（たとえば、抽出したCANメッセージ･データ）のグラフ表示/プロットなどを行うことができます。

　

ページトップに戻る

単一の統合ツールによる生産性の向上

VBAは、すべての情報を同じ画面で確認できます。VBAにより、複数のゲートウェイにわたるタイミング測定が可能になりました。高速かつ直感的な分析ができます。使い慣れた操作で、すべてのECUまたは回路動作を時系列に従って、詳細かつ簡単に分析できます。時間のかかる分析や問題解決は既に過去のものとなりました。

ページトップに戻る

ユニークな測定ツール

VBAを使用すると、他の機器では不可能な数多くの測定が可能になります。VBAでは、タイミング測定を実行するほかにも、CANメッセージ･ストリームからCANデータを抽出し、そのCANデータをオシロスコープの画面上にグラフィック形式でプロットして、個々のCANデータを他の電気信号と比較することができます。この例では、ステアリング角度とステアリング角度変化率をCANメッセージ捕捉から抽出し、それらのデータを10進数に変換した後、 VBAの画面上に時系列トラックとしてプロットしています。


拡大画像

ページトップに戻る

基本仕様
ビークル・バス･アナライザ（WaveRunner Xi-Aベースモデル 、CANBus TDM、FlexRaybus TDP、LINbus TDから構成されています。）
モデル名 帯域 ch数 サンプリング速度 標準メモリ
VBA 44Xi-A
 400MHz 4ch 5GS/s 12.5Mポイント
VBA 64Xi-A
 600MHz 4ch 5GS/s 12.5Mポイント
VBA 104Xi-A
 1GHz 4ch 5〜10GS/s 12.5Mポイント

* 販売終了しました。

モデルごとスペック詳細（モデル名をクリックで詳細表示されます） 

VBA 44Xi-A　スペック

Vertical System
Analog Bandwidth @ 50 Ω (-3 dB) 400 MHz
Rise Time (typical) 875 ps
Input Channels 4
Bandwidth Limiters 20 MHz; 200 MHz
Input Impedance 1 MΩ || 16 pF or 50 Ω
Input Coupling 50 Ω: DC, 1 MΩ: AC, DC, GND
Maximum Input Voltage 50 Ω: 5 Vrms, 1 MΩ: 400 V max. (DC + Peak AC = 5 kHz)
Input Connector ProBus/BNC
Vertical Resolution 8 bits; up to 11 with enhanced resolution (ERES)
Sensitivity 50 Ω: 2 mV/div–1 V/div fully variable; 1 MΩ: 2 mV–10 V/div fully variable
DC Gain Accuracy ±1.0% of full scale (typical); ±1.5% of full scale, = 10 mV/div (warranted)
Offset Range 50 Ω: ±1 V @ 2–98 mV/div, ±10 V @ 100 mV/div–1 V/div; 50 Ω: 1 M Ω: ±1 V @ 2–98 mV/div, ±10 V @ 100 mV/div–1 V/div, ±100 V @ 1.02 V/div–10 V/div
　

Horizontal System
Timebases Internal timebase common to all input channels; an external clock may be applied at the auxiliary input
Time/Division Range Real time: 200 ps/div–10 s/div, RIS mode: 200 ps/div to 10 ns/div, Roll mode: up to 1,000 s/div
Clock Accuracy <= 5 ppm @ 25 °C (typical) (<= 10 ppm @ 5–40 °C)
Sample Rate and Delay Time Accuracy Equal to Clock Accuracy
Channel-Channel Deskew Range ±9 x time/div setting, 100 ms max., each channel
External Clock DC to 600 MHz; (DC to 1 GHz for 104Xi and 204Xi) 50 Ω, (limited BW in 1 MΩ), BNC input, limited to 2 Ch operation (1 Ch in 62Xi), (minimum rise time and amplitude requirements apply at low frequencies)
Roll Mode User selectable at = 500 ms/div and = 100 kS/s
　

Acquisition System
Single-Shot Sample Rate/Ch 5 GS/s
Interleaved Sample Rate (2 Ch) 5 GS/s
Random Interleaved Sampling (RIS) 200 GS/s
RIS Mode User selectable from 200 ps/div to 10 ns/div
Maximum Trigger Rate 1,250,000 waveforms/second
Intersegment Time 800 ns
Acquisition Memory Options Max. Acquisition Points (4 Ch/2 Ch, 2 Ch/1 Ch in 62Xi) Segments (Sequence Mode)
Acquisition Memory Options - Standard (4 Ch / 2Ch) 12.5M/25M 10,000
Sequence Time Stamp Resolution 1 ns
　

Acquisition Processing
Averaging Summed and continuous averaging to 1 million sweeps
Enhanced Resolution (ERES) From 8.5 to 11 bits vertical resolution
Envelope (Extrema) Envelope, floor, or roof for up to 1 million sweeps
Interpolation Linear or (Sinx)/x
Time Resolution (min, Single-shot) 200 ps (5 GS/s)
　

Triggering System
Trigger Modes Normal, Auto, Single, Stop
Sources Any input channel, External, Ext/10, or Line; slope and level unique to each source, except Line
Coupling DC, AC (typically 7.5 Hz), HF Reject, LF Reject
Pre-trigger Delay 0–100% of memory size (adjustable in 1% increments, or 100 ns)
Post-trigger Delay Up to 10,000 divisions in real time mode, limited at slower time/div settings in roll mode
Hold-off by Time 1 ns to 20 s or 1 to 1,000,000,000 events
Internal Trigger Range EXT/10 ±4 V; EXT ±400 mV
Trigger Sensitivity with Edge Trigger (Ch 1–4) 2 div @ < 400 MHz 1 div @ < 200 MHz
Max. Trigger Frequency, SMART Trigger 400 MHz @ = 10 mV
　

Basic Triggers
Edge Triggers when signal meets slope (positive, negative, or Window) and level condition.
TV-Composite Video Triggers selectable fields (1, 2, 4, or 8), Positive or Negative slope, or Line (up to 1500), for NTSC, PAL, SECAM, or non-standard video (up to 1500 lines).
　

SMART Triggers
State or Edge Qualified Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
Dropout Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
Pattern Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input – 2 Ch+EXT on WaveRunner 62Xi). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pa
　

SMART Triggers with Exclusion Technology
Glitch and Pulse Width Triggers on positive or negative glitches with widths selectable from 500 ps to 20 s or on intermittent faults (subject to bandwidth limit of oscilloscope).
Signal or Pattern Interval Triggers on intervals selectable between 1 ns and 20 s.
Timeout (State/Edge Qualified) Triggers on any source if a given state (or transition edge) has occurred on another source. Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
Runt Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 s.
Slew Rate Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 s.
Exclusion Triggering Trigger on intermittent faults by specifying the normal width or period.
　

Color Waveform Display
Type Color 10.4" flat-panel TFT-LCD with high resolution touch screen
Resolution SVGA; 800 x 600 pixels; maximum external monitor output resolution of 2048 x 1536 pixels
Number of traces Display a maximum of 8 traces. Simultaneously display channel, zoom, memory, and math traces.
Grid Styles Auto, Single, Dual, Quad, Octal, XY, Single + XY, Dual + XY
Waveform Representation Sample dots joined or dots only in real-time mode
　

Internal Waveform Memory
Internal Waveform Memory M1, M2, M3, M4 Internal Waveform Memory (store full-length waveform with 16 bits/data point) or store to any number of files limited only by data storage media.
　

LeCroy WaveStream™ Fast Viewing Mode
Intensity 256 Intensity Levels, 1–100% adjustable via front panel control
Number of Channels up to 4 simultaneously
Max Sampling Rate 5 GS/s
Waveforms/second (continuous) up to 8000 waveforms/second
Operation Front panel toggle between normal real-time mode and LeCroy WaveStream Fast Viewing mode
　

Automatic Setup
Auto Setup Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals.
Find Vertical Scale Automatically sets the vertical sensitivity and offset for the selected channels to display a waveform with maximum dynamic range.
　

Probes
Probes One PP008 per channel standard; Optional passive and active probes available.
Probe System: ProBus Automatically detects and supports a variety of compatible probes.
Scale Factors Automatically or manually selected, depending on probe used
　

Zoom Expansion Traces
Zoom Expansion Traces Display up to 4 Zoom/Math traces with 16 bits/data point
　

Setup Storage
Setup Storage Store to the internal hard drive, over the network, or to a USB-connected peripheral device.
　

Interface
Remote Control Via Windows Automation, or via LeCroy Remote Command Set
GPIB Port (optional) Supports IEEE – 488.2
Ethernet Port 10/100/1000Base-T Ethernet interface (RJ-45 connector)
USB (Host) 5 USB 2.0 ports (one on front of instrument) supports Windows-compatible devices.
External Monitor Port Standard 15-pin D-Type SVGA-compatible DB-15; connect a second monitor to use extended desktop display mode with XGA resolution.
Serial Port DB-9 RS-232 port (not for remote oscilloscope control)
　

Auxiliary Input
Signal Types Selected from External Trigger or External Clock input on front panel
Coupling 50 Ω: DC, 1 MΩ: AC, DC, GND
Maximum Input Voltage 50 Ω: 5 Vrms, 1 MΩ: 400 V max. (DC + Peak AC = 5 kHz)
　

Auxiliary Output
Signal Types Trigger Enabled, Trigger Output. Pass/Fail, or Off
Output Signal TTL, ˜3.3 V
Calibrator Signal Output available on front panel connector provides a variety of signals for probe calibration and compensation.
　

General
Auto Calibration Ensures specified DC and timing accuracy is maintained for 1 year minimum.
Power Requirements 90–264 Vrms at 50/60 Hz; 115 Vrms (±10%) at 400 Hz, Automatic AC Voltage Selection Installation Category: 300V CAT II; Max. Power Consumption: 340 VA/340 W; 290 VA/290 W for WaveRunner 62Xi
　

Environmental and Safety

Temperature (Operating) +5 °C to +40 °C
Temperature (Non-Operating) -20 °C to +60 °C
Humidity (Operating) Maximum relative humidity 80% for temperatures up to 31 °C decreasing linearly to 50% relative humidity at 40 °C
Humidity (Non-Operating) 5% to 95% RH (non-condensing) as tested per MIL-PRF-28800F
Altitude (Operating) Operating Up to 2,000 m
Altitude (Non-Operating) Non-Operating 12,190 m
　

Physical Dimensions
Dimensions (HWD) 260 mm x 340 mm x 152 mm Excluding accessories and projections (10.25" x 13.4" x 6")
Net Weight 6.95 kg. (15.5 lbs.)
　

Certifications
Certifications CE Compliant, UL and cUL listed; Conforms to EN 61326, EN 61010-1, UL 61010-1 2nd Edition, and CSA C22.2 No. 61010-1-04.
　

Warranty and Service
Warranty and Service 3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, calibration, and customization services.
　
VBA 64Xi-A　スペック

Vertical System
Analog Bandwidth @ 50 Ω (-3 dB) 600 MHz
Rise Time (typical) 625 ps
Input Channels 4
Bandwidth Limiters 20 MHz; 200 MHz
Input Impedance 1 MΩ || 16 pF or 50 Ω
Input Coupling 50 Ω: DC, 1 MΩ: AC, DC, GND
Maximum Input Voltage 50 Ω: 5 Vrms, 1 MΩ: 400 V max. (DC + Peak AC = 5 kHz)
Input Connector ProBus/BNC
Vertical Resolution 8 bits; up to 11 with enhanced resolution (ERES)
Sensitivity 50 Ω: 2 mV/div–1 V/div fully variable; 1 MΩ: 2 mV–10 V/div fully variable
DC Gain Accuracy ±1.0% of full scale (typical); ±1.5% of full scale, = 10 mV/div (warranted)
Offset Range 50 Ω: ±1 V @ 2–98 mV/div, ±10 V @ 100 mV/div–1 V/div; 50 Ω: 1 M Ω: ±1 V @ 2–98 mV/div, ±10 V @ 100 mV/div–1 V/div, ±100 V @ 1.02 V/div–10 V/div
　

Horizontal System
Timebases Internal timebase common to all input channels; an external clock may be applied at the auxiliary input
Time/Division Range Real time: 200 ps/div–10 s/div, RIS mode: 200 ps/div to 10 ns/div, Roll mode: up to 1,000 s/div
Clock Accuracy = 5 ppm @ 25 °C (typical) (= 10 ppm @ 5–40 °C)
Sample Rate and Delay Time Accuracy Equal to Clock Accuracy
Channel-Channel Deskew Range ±9 x time/div setting, 100 ms max., each channel
External Clock DC to 600 MHz; (DC to 1 GHz for 104Xi and 204Xi) 50 Ω, (limited BW in 1 MΩ), BNC input, limited to 2 Ch operation (1 Ch in 62Xi), (minimum rise time and amplitude requirements apply at low frequencies)
Roll Mode User selectable at = 500 ms/div and = 100 kS/s
　

Acquisition System
Single-Shot Sample Rate/Ch 5 GS/s
Interleaved Sample Rate (2 Ch) 10 GS/s
Random Interleaved Sampling (RIS) 200 GS/s
RIS Mode User selectable from 200 ps/div to 10 ns/div
Maximum Trigger Rate 1,250,000 waveforms/second
Intersegment Time 800 ns
Acquisition Memory Options Max. Acquisition Points (4 Ch/2 Ch, 2 Ch/1 Ch in 62Xi) Segments (Sequence Mode)
Acquisition Memory Options - Standard (4 Ch / 2Ch) 12.5M/25M 10,000
Sequence Time Stamp Resolution 1 ns
　

Acquisition Processing
Averaging Summed and continuous averaging to 1 million sweeps
Enhanced Resolution (ERES) From 8.5 to 11 bits vertical resolution
Envelope (Extrema) Envelope, floor, or roof for up to 1 million sweeps
Interpolation Linear or (Sinx)/x
Time Resolution (min, Single-shot) 100 ps (10 GS/s)
　

Triggering System
Trigger Modes Normal, Auto, Single, Stop
Sources Any input channel, External, Ext/10, or Line; slope and level unique to each source, except Line
Coupling DC, AC (typically 7.5 Hz), HF Reject, LF Reject
Pre-trigger Delay 0–100% of memory size (adjustable in 1% increments, or 100 ns)
Post-trigger Delay Up to 10,000 divisions in real time mode, limited at slower time/div settings in roll mode
Hold-off by Time 1 ns to 20 s or 1 to 1,000,000,000 events
Internal Trigger Range EXT/10 ±4 V; EXT ±400 mV
Trigger Sensitivity with Edge Trigger (Ch 1–4) 2 div @ < 600 MHz 1 div @ < 200 MHz
Max. Trigger Frequency, SMART Trigger 600 MHz @ = 10 mV
　

Basic Triggers
Edge Triggers when signal meets slope (positive, negative, or Window) and level condition.
TV-Composite Video Triggers selectable fields (1, 2, 4, or 8), Positive or Negative slope, or Line (up to 1500), for NTSC, PAL, SECAM, or non-standard video (up to 1500 lines).
　

SMART Triggers
State or Edge Qualified Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
Dropout Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
Pattern Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input – 2 Ch+EXT on WaveRunner 62Xi). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pa
　

SMART Triggers with Exclusion Technology
Glitch and Pulse Width Triggers on positive or negative glitches with widths selectable from 500 ps to 20 s or on intermittent faults (subject to bandwidth limit of oscilloscope).
Signal or Pattern Interval Triggers on intervals selectable between 1 ns and 20 s.
Timeout (State/Edge Qualified) Triggers on any source if a given state (or transition edge) has occurred on another source. Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
Runt Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 s.
Slew Rate Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 s.
Exclusion Triggering Trigger on intermittent faults by specifying the normal width or period.
　

Color Waveform Display
Type Color 10.4" flat-panel TFT-LCD with high resolution touch screen
Resolution SVGA; 800 x 600 pixels; maximum external monitor output resolution of 2048 x 1536 pixels
Number of traces Display a maximum of 8 traces. Simultaneously display channel, zoom, memory, and math traces.
Grid Styles Auto, Single, Dual, Quad, Octal, XY, Single + XY, Dual + XY
Waveform Representation Sample dots joined or dots only in real-time mode
　

Internal Waveform Memory
Internal Waveform Memory M1, M2, M3, M4 Internal Waveform Memory (store full-length waveform with 16 bits/data point) or store to any number of files limited only by data storage media.
　

LeCroy WaveStream™ Fast Viewing Mode
Intensity 256 Intensity Levels, 1–100% adjustable via front panel control
Number of Channels up to 4 simultaneously
Max Sampling Rate 5 GS/s (10 GS/s for WaveRunner 62Xi, 64Xi, 104Xi, 204Xi in interleaved mode)
Waveforms/second (continuous) up to 8000 waveforms/second
Operation Front panel toggle between normal real-time mode and LeCroy WaveStream Fast Viewing mode
　

Automatic Setup
Auto Setup Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals.
Find Vertical Scale Automatically sets the vertical sensitivity and offset for the selected channels to display a waveform with maximum dynamic range.
　

Probes
Probes One PP008 per channel standard; Optional passive and active probes available.
Probe System: ProBus Automatically detects and supports a variety of compatible probes.
Scale Factors Automatically or manually selected, depending on probe used
　

Zoom Expansion Traces
Zoom Expansion Traces Display up to 4 Zoom/Math traces with 16 bits/data point
　

Setup Storage
Setup Storage Store to the internal hard drive, over the network, or to a USB-connected peripheral device.
　

Interface
Remote Control Via Windows Automation, or via LeCroy Remote Command Set
GPIB Port (optional) Supports IEEE – 488.2
Ethernet Port 10/100/1000Base-T Ethernet interface (RJ-45 connector)
USB (Host) 5 USB 2.0 ports (one on front of instrument) supports Windows-compatible devices.
External Monitor Port Standard 15-pin D-Type SVGA-compatible DB-15; connect a second monitor to use extended desktop display mode with XGA resolution.
Serial Port DB-9 RS-232 port (not for remote oscilloscope control)
　

Auxiliary Input
Signal Types Selected from External Trigger or External Clock input on front panel
Coupling 50 Ω: DC, 1 MΩ: AC, DC, GND
Maximum Input Voltage 50 Ω: 5 Vrms, 1 MΩ: 400 V max. (DC + Peak AC = 5 kHz)
　

Auxiliary Output
Signal Types Trigger Enabled, Trigger Output. Pass/Fail, or Off
Output Signal TTL, ˜3.3 V
Calibrator Signal Output available on front panel connector provides a variety of signals for probe calibration and compensation.
　

General
Auto Calibration Ensures specified DC and timing accuracy is maintained for 1 year minimum.
Power Requirements 90–264 Vrms at 50/60 Hz; 115 Vrms (±10%) at 400 Hz, Automatic AC Voltage Selection Installation Category: 300V CAT II; Max. Power Consumption: 340 VA/340 W; 290 VA/290 W for WaveRunner 62Xi
　

Environmental and Safety

Temperature (Operating) +5 °C to +40 °C
Temperature (Non-Operating) -20 °C to +60 °C
Humidity (Operating) Maximum relative humidity 80% for temperatures up to 31 °C decreasing linearly to 50% relative humidity at 40 °C
Humidity (Non-Operating) 5% to 95% RH (non-condensing) as tested per MIL-PRF-28800F
Altitude (Operating) Operating Up to 2,000 m
Altitude (Non-Operating) Non-Operating 12,190 m
　

Physical Dimensions
Dimensions (HWD) 260 mm x 340 mm x 152 mm Excluding accessories and projections (10.25" x 13.4" x 6")
Net Weight 6.95 kg. (15.5 lbs.)
　

Certifications
Certifications CE Compliant, UL and cUL listed; Conforms to EN 61326, EN 61010-1, UL 61010-1 2nd Edition, and CSA C22.2 No. 61010-1-04.
　

Warranty and Service
Warranty and Service 3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, calibration, and customization services.
　
VBA 104Xi-A　スペック

Vertical System
Analog Bandwidth @ 50 Ω (-3 dB) 1 GHz
Rise Time (typical) 400 ps
Input Channels 4
Bandwidth Limiters 20 MHz; 200 MHz
Input Impedance 1 MΩ || 20 pF or 50 Ω
Input Coupling 50 Ω: DC, 1 MΩ: AC, DC, GND
Maximum Input Voltage 50 Ω: 5 Vrms, 1 MΩ: 250 V max. (DC + Peak AC = 10 kHz)
Input Connector ProBus/BNC
Vertical Resolution 8 bits; up to 11 with enhanced resolution (ERES)
Sensitivity 50 Ω: 2 mV/div–1 V/div fully variable; 1 MΩ: 2 mV–10 V/div fully variable
DC Gain Accuracy ±1.0% of full scale (typical); ±1.5% of full scale, = 10 mV/div (warranted)
Offset Range ±400 mv@2–4.95 mv/div, ±1 V@5–99 mv/div, ±10 V @ 100 mv–1 V/div, ±100V @ 1.02–10 V/div; 1 M Ω: ±400 mv @ 2–4.95 mv/div, ±1 V @ 5–99 mv/div, ±10V @ 100 mv–1 V/div, ±100V @ 1.02–10 V/div
　

Horizontal System
Timebases Internal timebase common to all input channels; an external clock may be applied at the auxiliary input
Time/Division Range Real time: 200 ps/div–10 s/div, RIS mode: 200 ps/div to 10 ns/div, Roll mode: up to 1,000 s/div
Clock Accuracy <= 5 ppm @ 25 °C (typical) (<= 10 ppm @ 5–40 °C)
Sample Rate and Delay Time Accuracy Equal to Clock Accuracy
Channel-Channel Deskew Range ±9 x time/div setting, 100 ms max., each channel
External Clock DC to 600 MHz; (DC to 1 GHz for 104Xi and 204Xi) 50 Ω, (limited BW in 1 MΩ), BNC input, limited to 2 Ch operation (1 Ch in 62Xi), (minimum rise time and amplitude requirements apply at low frequencies)
Roll Mode User selectable at = 500 ms/div and = 100 kS/s
　

Acquisition System
Single-Shot Sample Rate/Ch 5 GS/s
Interleaved Sample Rate (2 Ch) 10 GS/s
Random Interleaved Sampling (RIS) 200 GS/s
RIS Mode User selectable from 100 ps/div to 10 ns/div
Maximum Trigger Rate 1,250,000 waveforms/second
Intersegment Time 800 ns
Acquisition Memory Options Max. Acquisition Points (4 Ch/2 Ch, 2 Ch/1 Ch in 62Xi) Segments (Sequence Mode)
Acquisition Memory Options - Standard (4 Ch / 2Ch) 12.5M/25M 10,000
Sequence Time Stamp Resolution 1 ns
　

Acquisition Processing
Averaging Summed and continuous averaging to 1 million sweeps
Enhanced Resolution (ERES) From 8.5 to 11 bits vertical resolution
Envelope (Extrema) Envelope, floor, or roof for up to 1 million sweeps
Interpolation Linear or (Sinx)/x
Time Resolution (min, Single-shot) 100 ps (10 GS/s)
　

Triggering System
Trigger Modes Normal, Auto, Single, Stop
Sources Any input channel, External, Ext/10, or Line; slope and level unique to each source, except Line
Coupling DC, AC (typically 7.5 Hz), HF Reject, LF Reject
Pre-trigger Delay 0–100% of memory size (adjustable in 1% increments, or 100 ns)
Post-trigger Delay Up to 10,000 divisions in real time mode, limited at slower time/div settings in roll mode
Hold-off by Time 1 ns to 20 s or 1 to 1,000,000,000 events
Internal Trigger Range EXT/10 ±4 V; EXT ±400 mV
Trigger Sensitivity with Edge Trigger (Ch 1–4) 2 div @ < 1 GHz 1 div @ < 200 MHz
Max. Trigger Frequency, SMART Trigger 1 GHz @ = 10 mV
　

Basic Triggers
Edge Triggers when signal meets slope (positive, negative, or Window) and level condition.
TV-Composite Video Triggers selectable fields (1, 2, 4, or 8), Positive or Negative slope, or Line (up to 1500), for NTSC, PAL, SECAM, or non-standard video (up to 1500 lines).
　

SMART Triggers
State or Edge Qualified Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
Dropout Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
Pattern Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input – 2 Ch+EXT on WaveRunner 62Xi). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pa
　

SMART Triggers with Exclusion Technology
Glitch and Pulse Width Triggers on positive or negative glitches with widths selectable from 500 ps to 20 s or on intermittent faults (subject to bandwidth limit of oscilloscope).
Signal or Pattern Interval Triggers on intervals selectable between 1 ns and 20 s.
Timeout (State/Edge Qualified) Triggers on any source if a given state (or transition edge) has occurred on another source. Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
Runt Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 s.
Slew Rate Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 s.
Exclusion Triggering Trigger on intermittent faults by specifying the normal width or period.
　

Color Waveform Display
Type Color 10.4" flat-panel TFT-LCD with high resolution touch screen
Resolution SVGA; 800 x 600 pixels; maximum external monitor output resolution of 2048 x 1536 pixels
Number of traces Display a maximum of 8 traces. Simultaneously display channel, zoom, memory, and math traces.
Grid Styles Auto, Single, Dual, Quad, Octal, XY, Single + XY, Dual + XY
Waveform Representation Sample dots joined or dots only in real-time mode
　

Internal Waveform Memory
Internal Waveform Memory M1, M2, M3, M4 Internal Waveform Memory (store full-length waveform with 16 bits/data point) or store to any number of files limited only by data storage media.
　

LeCroy WaveStream™ Fast Viewing Mode
Intensity 256 Intensity Levels, 1–100% adjustable via front panel control
Number of Channels up to 4 simultaneously
Max Sampling Rate 5 GS/s (10 GS/s for WaveRunner 62Xi, 64Xi, 104Xi, 204Xi in interleaved mode)
Waveforms/second (continuous) up to 8000 waveforms/second
Operation Front panel toggle between normal real-time mode and LeCroy WaveStream Fast Viewing mode
　

Automatic Setup
Auto Setup Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals.
Find Vertical Scale Automatically sets the vertical sensitivity and offset for the selected channels to display a waveform with maximum dynamic range.
　

Probes
Probes One PP007 per channel standard; Optional passive and active probes available.
Probe System: ProBus Automatically detects and supports a variety of compatible probes.
Scale Factors Automatically or manually selected, depending on probe used
　

Zoom Expansion Traces
Zoom Expansion Traces Display up to 4 Zoom/Math traces with 16 bits/data point
　

Setup Storage
Setup Storage Store to the internal hard drive, over the network, or to a USB-connected peripheral device.
　

Interface
Remote Control Via Windows Automation, or via LeCroy Remote Command Set
GPIB Port (optional) Supports IEEE – 488.2
Ethernet Port 10/100/1000Base-T Ethernet interface (RJ-45 connector)
USB (Host) 5 USB 2.0 ports (one on front of instrument) supports Windows-compatible devices.
External Monitor Port Standard 15-pin D-Type SVGA-compatible DB-15; connect a second monitor to use extended desktop display mode with XGA resolution.
Serial Port DB-9 RS-232 port (not for remote oscilloscope control)
　

Auxiliary Input
Signal Types Selected from External Trigger or External Clock input on front panel
Coupling 50 Ω: DC, 1 MΩ: AC, DC, GND
Maximum Input Voltage 50 Ω: 5 Vrms, 1 MΩ: 250 V max. (DC + Peak AC = 10 kHz)
　

Auxiliary Output
Signal Types Trigger Enabled, Trigger Output. Pass/Fail, or Off
Output Signal TTL, ˜3.3 V
Calibrator Signal Output available on front panel connector provides a variety of signals for probe calibration and compensation.
　

General
Auto Calibration Ensures specified DC and timing accuracy is maintained for 1 year minimum.
Power Requirements 90–264 Vrms at 50/60 Hz; 115 Vrms (±10%) at 400 Hz, Automatic AC Voltage Selection Installation Category: 300V CAT II; Max. Power Consumption: 340 VA/340 W; 290 VA/290 W for WaveRunner 62Xi
　

Environmental and Safety

Temperature (Operating) +5 °C to +40 °C
Temperature (Non-Operating) -20 °C to +60 °C
Humidity (Operating) Maximum relative humidity 80% for temperatures up to 31 °C decreasing linearly to 50% relative humidity at 40 °C
Humidity (Non-Operating) 5% to 95% RH (non-condensing) as tested per MIL-PRF-28800F
Altitude (Operating) Operating Up to 2,000 m
Altitude (Non-Operating) Non-Operating 12,190 m
　

Physical Dimensions
Dimensions (HWD) 260 mm x 340 mm x 152 mm Excluding accessories and projections (10.25" x 13.4" x 6")
Net Weight 6.95 kg. (15.5 lbs.)
　

Certifications
Certifications CE Compliant, UL and cUL listed; Conforms to EN 61326, EN 61010-1, UL 61010-1 2nd Edition, and CSA C22.2 No. 61010-1-04.
　

Warranty and Service
Warranty and Service 3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, calibration, and customization services.
　

クリックで詳細表示されます

コンプライアンス・テスト・パッケージ

シリアル・トリガ＆デコード

ミックスド・シグナル・ソリューション

ミックスド・シグナル・アクセサリ

ジッタ解析パッケージ

その他、汎用ソフトウエア

データストレージ解析

電源解析

デジタル・フィルタ・パッケージ

その他

クリックで詳細表示されます

アクティブ・プローブ

電流プローブ

高精度差動アンプ

差動プローブ

高圧プローブ

高圧差動プローブ

パッシブ・プローブ

アクセサリ・キット

ページトップに戻る