VOLTAGE CONTROL	ą3.5 kV Configuration	ą7 kV Configuration
Range	100-3500 V	200-7000 V
CAMAC Programming	14 bits	14 bits
CAMAC Step	0.25 V	0.5 V
CAMAC Accuracy	ē ą(1.5 V + 0.1%)	ē ą(3 V + 0.1%)
Front-Panel Adjustment	Ten-turn vernier potentiometer
	500 V/turn	1000 V/turn
CAMAC Monitor	12-bit ADC	12-bit ADC
CAMAC Resolution	1 V	2 V
CAMAC Offset (response to 0 V output)	0-2 counts	0-2 counts
CAMAC Accuracy	ą0.2%	ą0.2%
Front-Panel Monitor	Low Impedance (< 10 ohm) voltage output, suitable for driving a meter; BNC connector.
Front-Panel Scale	2 V/kV ą0.5%	1 V/kV ą0.5%
Front-Panel Offset (value for 0 V output)	ē ą4 V referred to HV output	ē ą8 V referred to HV output
CURRENT CONTROL
Range	0-2.5 mA	0-1 mA
CAMAC Programming	8 bits	8 bits
CAMAC Step	10 ĩA	4 ĩA
CAMAC Accuracy	ą(1% + 12 ĩA)	ą(1% + 5 ĩA)
Front-Panel Adjustment	Ten-turn vernier potentiometer
	250 ĩA/turn	100 ĩA/turn
CAMAC Monitor	12-bit ADC	12-bit ADC
CAMAC Resolution	625 nA	250 nA
CAMAC Offset (Response to 0 ĩA load)	1 or 2 counts	1 or 2 counts
CAMAC Accuracy	ą0.5%	ą0.5%
Front-Panel Monitor	Low Impedance (< 10 ohm) voltage output, suitable for driving a meter; BNC connector.
Front-Panel Scale	4 V/mA ą0.5%	10 V/mA ą0.5%
Front-Panel Offset (value for 0 V output)	ē ą4 ĩA	ē ą2 ĩA
GENERAL
Output Power Rating	7 W	7 W
Output Ripple (at maximum current)	< 50 mV rms	< 50 mV rms
Output Temperature Coefficient	Typically ą50 ppm/ĄC, ą100 ppm/ĄC maximum
Voltage Regulation	< 0.5 V (0 to 2.5 mA)	< 1 V (0 to 1 mA)
Short Circuit Protection	Yes	Yes
Output Connector	SHV	Reynolds 1064-1
CONTROLS
HV On/Off	Toggle switch; turns On/Off HV output.
Manual/Remote	Selects front panel or CAMAC operation of voltage and current set.
ADC	12 bits; conversion time < 30 ĩsec.
INDICATOR LAMPS
HV On	Voltage present at output.
Overload	Supply in current-limiting mode.
Positive	Positive output configuration.
Negative	Negative output configuration.
3.5 kV	ON	OFF
7 kV	OFF	ON
POWER	350 mA at +24 V; 350 mA at -24 V; 350 mA at +6 V.