MIPI M-PHY Active Termination Adapter Dual Pack
The TF-MIPI-MPHY Active Termination Adapter provides a DC termination voltage to eliminate common-mode loading.
It maintains a pristine path to the oscilloscope input, eliminating reflections and ensuring noise performance superior to any probe-based solution.
The TF-MIPI-MPHY-DUALPAK provides two input adapters in a convenient case. Using pairs is required by M-PHY conformance testing.
- Higher signal fidelity at a significantly lower cost than probe-based approaches
- Maintains a pristine path to the oscilloscope input, eliminating reflections
Cleaner signal path
The adapter provides a signal path that is as clean as a direct connection. Compare these two 5.8 Gbps signals: the eye diagram on the left was taken using a direct connection and the eye diagram on the right was taken using TF-MIPI-MPHY. Note the Active Termination Adapter has no perceptible impact on the signal quality.