Oscilloscope Probes


Short wavelength O/E Converter (500-870 nm)

    Optical to Electrical Converters

OE425 - Optical-to-Electrical Converter, 500-870 nm ProBus BNC Connector
OE455 - Optical-to-Electrical Converter, 950-1630 nm ProBus BNC Connector
OE555 - Optical-to-Electrical Converter, 950-1630 nm ProLink BMA Connector Limited Availability
OE6250G-M - O-E converter, 25 GHz Bessel-Thomson response, 36 GHz flat response
OE695G - Optical to Electrical Converter
These wide- band multi-mode optical-to-electrical converters are designed for measuring optical communications signals. They connect to Teledyne LeCroy real-time oscilloscopes and provide capability for physical layer signal assessment using a variety of oscilloscope tools, such as SDAIII-CompleteLinQ Serial Data Eye, Jitter, Noise and Crosstalk Analysis, mask testing, serial triggering and decoding, and other compliance and debug tools. Maximum data rate test capability is >11.317 Gb/s with reference receiver, or 12.5 Gb/s without.
Leading Specifications
  • Frequency range to 5 GHz (6 GHz optical)
  • 62.5 µm multi-mode fiber input
  • Broad wavelength range:
    • 500 nm – 870 nm (OE425 and OE525)
    • 950 nm – 1630 nm (OE455 and OE555)
  • High responsivity: 1.1 V/mW
  • Low noise: 1.1 µW rms

These wide-band multi-mode optical to-electrical converters are designed for measuring optical communications signals. Their broad wavelength range and multimode input optics make these devices ideal for applications including Gigabit Ethernet and Fibrechannel, as well as SONET/SDH up to 2.5 Gb/s.

The OE425 and OE455 are ProBus® modules compatible with WaveProand Waverunner oscilloscopes as well as WaveMaster instruments when used with a LPA-BNC adapter.

The OE525 and OE555 are ProLink® modules compatible with WaveMaster,SDA and DDA instruments.

Universal Calibrated Reference Receivers
The O/E converters contain calibration data that can be used to create optical reference receivers for SONET/SDH (up to OC48/STM16), Fibre Channel, Gigabit Ethernet and other optical standards. This feature is available when the O/E is used on a WaveMaster series oscilloscope. This universal reference receiver supports any data rate up to 3 GHz and remains calibrated on any channel of any WaveMaster.

Main Specifications

Bandwidth 5 GHz (6 GHz optical)

Electrical Characteristics

Risetime (typical) 90 ps

WaveRunner 8000HD High Definition Oscilloscopes

WaveRunner 8000HD

   Learn More
MDA 8000HD Motor Drive Analyzers

MDA 8000HD Motor Drive Analyzers

   Learn More
WavePro HD Oscilloscopes

WavePro HD Oscilloscopes
   Learn More
WaveMaster / SDA / DDA 8 Zi-B Oscilloscopes

   Learn More
WaveRunner 8000-R Low-Profile Oscilloscopes

   Learn More