多機能オシロスコープ
WaveSurfer 3000/3000zシリーズ

WaveSurfer 3000/3000zシリーズは、大画面10.1インチのタッチパネルを装備し、多機能でありながら使いやすさを追求したユーザー・フレンドリーなオシロスコープです。

【新登場】
多くのアプリケーションに対応するWaveSurfer 3000zシリーズ新登場!

  • パワーデバイス解析対応(オプション)
  • AudioBusトリガ・デコード対応(オプション)
  • 帯域:100MHz、1GHzモデル登場
  •  
  •  
  •  
基本仕様
モデル名 帯域 ch数 サンプリング
速度
標準メモリ 価格(税別)
WaveSurfer 3014z
100MHz 4ch 1GS/s
(インター
リーブ時
2GS/s)
10Mポイント
(インター
リーブ時
20Mポイント)
50万円
WaveSurfer 3024z
200MHz 4ch 2GS/s
(インター
リーブ時
4GS/s)
60万円
WaveSurfer 3034z
350MHz 4ch 102万円
WaveSurfer 3054z
500MHz 4ch 129万円
WaveSurfer 3104z
1GHz 4ch 155万円
モデル名 帯域 ch数 サンプリング
速度
標準メモリ キャンペーン
価格(税別)
WaveSurfer 3022
限定供給品*
200MHz 2ch 2GS/s
(インター
リーブ時
4GS/s)
10Mポイント 50万円
40万円
WaveSurfer 3024
限定供給品*
200MHz 4ch 60万円
48万円
WaveSurfer 3034
限定供給品*
350MHz 4ch 86万円
68.8万円
WaveSurfer 3054
限定供給品*
500MHz 4ch 109万円
87.2万円
WaveSurfer 3074
限定供給品*
750MHz 4ch 133万円
106.4万円
* 限定供給品のため納期、在庫はお問合せください。
  • 価格は2018年4月現在のものです。
  • ユーザ各位のご要望、当社の品質管理の一層の高度化などにともなって、
    おことわりなしに仕様の一部、価格を変更させていただくことがあります。

モデルごとスペック詳細(モデル名をクリックで詳細表示されます)

WaveSurfer 3014z スペック

Vertical - Analog Channels

Analog Bandwidth (Max) 100 MHz
Analog Bandwidth @ 50 Ω (-3 dB) (ProBus Input) 100 MHz
(≥1 mV/div)
Analog Bandwidth @ 1 MΩ (-3 dB) (ProBus Input) 100 MHz (typical)
Rise Time (10-90%, 50 Ω) 3.5 ns (Typical)
Input Channels 4
Vertical Resolution 8 bits; up to 11 bits with enhanced resolution (ERES)
Sensitivity 1 MΩ: 1 mV/div - 10 V/div, fully variable;
50 Ω: 1 mV/div - 1 V/div, fully variable
DC Vertical Gain Accuracy (Gain Component of DC Accuracy) ±(1.5%) Full Scale, offset at 0 V > 5mV; ±(2.5%) < 5mV
Channel-Channel Isolation 40 dB from DC - 100 MHz
(For any two ProBus input channels, same v/div settings, typical)
Offset Range 50Ω
±2V: 1mV/div-19.8mV/div
±5V: 20mV/div-100mV/div
±20V: 102mV/div-198mV/div
±50V: 200mV/div-1V/div

1MΩ
±2V: 1mV/div-19.8mV/div
±5V: 20mV/div-100mV/div
±20V: 102mV/div-198mV/div
±50V: 200mV/div-1V/div
±200V: 1.02V/div-1.98V/div
±400V: 2V/div-10V/div
Maximum Input Voltage 1 MΩ: 400 V max (DC + Peak AC ≤ 10 KHz), 50 Ω: 5 VRMS
Input Coupling AC, DC, GND
Input Impedance 1 MΩ ± 2.0% || 16 pF, 50 Ω ± 2.0%
Bandwidth Limiters 20 MHz
 

Horizontal - Analog Channels

Timebases Internal timebase common to 4 input channels
Acquisition Modes Real-time, Roll, Random Interleaved Sampling (RIS), Sequence
Time/Division Range 500 ps/div - 50 s/div
RIS available at ≤ 10 ns/div;
Roll Mode available at ≥ 100 ms/div and ≤ 5 MS/s
Clock Accuracy 10 ppm > 1 ms interval
Delta Time Measurement Accuracy \sqrt{2}*\sqrt{(\frac{Noise}{SlewRate})^2+(Sample Clock Jitter)^2) (RMS)+(clock accuracy*reading)(seconds)
Jitter Measurement Floor \sqrt{(\frac{Noise}{SlewRate})^2+(Sample Clock Jitter)^2\; seconds\; rms\; (TIE)}
Channel-Channel Deskew Range ±9 x time/div. setting, 100 ms max., each channel
 

Acquisition - Analog Channels

Sample Rate (Single-shot) 2 GS/s on 2 Ch
1 GS/s on 4 Ch
Sample Rate (Repetitive) 50 GS/s for repetitive signals (5 ns/div to 10 ns/div)
Memory Length (4 Ch / 2 Ch / 1Ch)
(Number of Segments)
10M / 20M / 20M
(1000)
Enhanced Resolution (ERES) 8 bits; up to 11 bits with enhanced resolution (ERES)
 

Vertical, Horizontal, Acquisition - Digital Channels

Maximum Input Frequency 125 MHz
Minimum Detectable Pulse Width 4 ns
Input Channels 16
Input Impedance (Flying Leads) 100 kΩ || 5 pF
Input Dynamic Range ±20V
Maximum Input Voltage ±30V Peak
Maximum Input Voltage Swing 500mVpp
Threshold Groupings Pod 2: D15 - D8, Pod 1: D7 - D0
Threshold Selections TTL (+1.4V), 5V CMOS (+2.5V), ECL (-1.3V), or User Defined
Threshold Accuracy ±(3% of threshold setting + 100mV)
User Defined Threshold Range ±10V in 20 mV steps
Sample Rate 500 MS/s
Record Length 10 MS - 16 Channels
Channel-to-Channel Skew ±(1 digital sample)
 

Triggering System

Modes Normal, Auto, Single, Stop
Sources Ch 1 - Ch 4, EXT, EXT/5, AC Line
Coupling AC, DC, LF Rej, HF Rej,
Pre-trigger Delay 0 - 100% Full Scale
Post-trigger Delay 0 - 10,000 Divisions
Hold-off 10 ns up to 20s
Internal Trigger Level Range ±4.1 Divisions
External Trigger Level Range Ext: ±0.61 V, EXT/5: ±3.05 V
Trigger Sensitivity with Edge Trigger ProBus Inputs 0.8 division: DC - 10 MHz
1.5 division: 10 MHz - 200 MHz
Trigger Sensitivity with Edge Trigger (Aux Input) Ext: 200 mV from DC to 10 MHz
300 mV from 10 MHz to 200 MHz
Ext/5: 1 V from DC to 10 MHz
1.5 V from 10 MHz to 200 MHz
 

Trigger Types

Edge Triggers when signal meets slope (positive, negative, or either) and level condition.
Width Triggers on positive or negative glitches with selectable widths.
Minimum width 500 ps, maximum width: 20 s
Window Triggers when signal exits a window defined by adjustable thresholds
Pattern Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pattern.
TV-Composite Video Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative).
Runt Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
Slew Rate Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
Interval Triggers on intervals selectable between 1 ns and 20 s.
Dropout Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
Multi-Stage: Qualified (Timeout or State/Edge Qualified) Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
 

Low Speed Serial Protocol Trigger (Optional)

Supported Protocols I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN1.1, CAN2.0, CAN FD, LIN, FlexRay, AudioBus (I2S, LJ, RJ, TDM)
 

Measurement Tools

Measurement Functionality Display up to 6 measurement parameters together with statistics, including mean, minimum, maximum, standard deviation, and total number. Each occurrence of each parameter is measured and added to the statistics table. Histicons provide a fast, dynamic view of parameters and waveshape characteristics. Parameter gates define the location for measurement on the source waveform.
Measurement Parameters - Horizontal + Jitter Delay (from trigger, 50%), Duty Cycle, Edges , Fall Time (90-10, 80-20), Frequency, Period, Δ Period, Phase, Rise Time (10-90, 20-80), Skew, Width+, Width-
Measurement Parameters - Vertical Amplitude, Base, Maximum, Mean, Minimum, Peak-to-Peak, RMS, Std. Deviation, Top.
Measurement Parameters - Pulse Area, Base, Fall Time (90-10, 80-20), Overshoot (positive, negative), Rise Time (10-90, 80-20), Top, Width+, Width-
 

Math Tools

Math Functionality Display up to 2 math functions traces (F1-F2). The easy-to-use graphical interface simplifies setup of up to two operations on each function trace, and function traces can be chained together to perform math-on-math.
Math Operators - Basic Math Average (summed), Average (continuous), Difference (-), Envelope, Exp (base e, base 10), Floor, Invert (negate), Log (base e, base 10), Product (x), Ratio (/), Reciprocal, Rescale (with units), Roof, Sum (+).
Math Operators - Filters Enhanced resolution (to 11 bits vertical)
Math Operators - Frequency Analysis FFT (power spectrum, magnitude), up to full record length. Select from Rectangular, VonHann, Hamming, FlatTop and Blackman Harris windows.
Math Operators - Functions Derivative, Integral, Invert (negate), Rescale (with units), Square, Square root, Zoom (identity).
 

Measurement and Math Integration

Measurement and Math Integration Trend (datalog) of up to 1000 measurement parameters
 

Pass/Fail Testing

Pass/Fail Testing Mask Test (pre-defined or user-defined mask, waveform All In, All Out, Any In, or Any Out conditions) with following THEN Save (waveforms), Stop, Alarm, (send) Pulse, Hardcopy (send email, save screen image, save to clipboard, send to printer), or (save) LabNotebook.
 

Display System

Size Color 10.1" widescreen flat panel TFT-LCD with high resolution capacitive touch screen
Resolution 1024 x 600
Number of traces Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces.
Grid Styles Auto, Single,X-Y, Single+X-Y
 

Persistence Display

Analog and Color-Graded Persistence Variable saturation levels; stores each trace’s persistence data in memory
Persistence Types Select analog or color
Trace Selection Activate persistence on all traces
Persistence Aging Select from 1.00 s to infinity
 

Zoom Expansion Traces

Zoom Expansion Traces Display up to 4 Zoom and 2 Math/Zoom traces
 

Internal Waveform Memory

Internal Waveform Memory 2 active waveform memory traces (M1-M2) store 16 bit/point full length waveforms. Waveforms can be stored to 2 file loacations on the scope or on the microSD, limited only by the data storage media capacity
 

Setup Storage

Front Panel and Instrument Status Store to the internal microSD, over the network, or to a USB-connected peripheral device.
 

Automatic Setup

Auto Setup Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals
Find Vertical Scale Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range
 

Calibration

Auto Calibration Ensures specified DC and timing accuracy is maintained for 1 year minimum.
 

Processor/CPU

Type TI AM5728 Sitara Processor
Processor Memory 2 GB
Operating System Microsoft Windows CE
Oscilloscope Operating Software Teledyne LeCroy MAUI™
Real Time Clock Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks.
 

Connectivity

Ethernet Port Supports 10/100BaseT Ethernet interface (RJ45 port)
USB Host Ports (4) USB 2.0 Ports Total - (2) Front USB 2.0 Ports
USB Device Port 1 USBTMC port
GPIB Port (optional) Supports IEEE - 488.2 (External)
External Monitor Port Standard DB-15 connector (support resolution of 1024x600)
Remote Control Via Windows Automation, or via LeCroy Remote Command Set
Network Communication Standard VXI-11 or VICP, LXI Compatible
 

Auxiliary Input

Signal Types Select External Trigger on the rear panel
Coupling 50 Ω: DC; 1 MΩ: AC, DC, GND
Max. Input Voltage 50 Ω: 5 Vrms; 1 MΩ: 250 Vmax (DC + Peak AC ≤ 10 kHz)
 

Auxiliary Output

Signal Types Always Trig Out
Output Signal 3.3 V into 1 MΩ pulse > 1.3 ms
Control Signals Trigger out
Connector Type BNC, located on back
 

Probes

Probes Qty. (4) ÷10 Passive Probes
Probe System ProBus. Automatically detects and supports a variety of compatible probes
Scale Factors Automatically or manually selected depending on probe used
Calibration Output Default is 1kHz square wave, 3.3Vp-p (typical), output to probe hook. Settable from 500 Hz to 1 MHz square wave
 

Power Requirements

Voltage 100 - 240 VAC, 50 Hz - 60 Hz ±5%
100 - 120 VAC, 400 Hz ±5%
Max. Power Consumption 330 VA
 

Environmental

Temperature (Operating) 0 °C to 50 °C
Temperature (Non-Operating) '-30 °C to 70 °C
Humidity (Operating) 90% RH, 30 °C
50% RH, 50 °C
Humidity (Non-Operating) 95% RH
Altitude (Operating) 3,048 m max at <=25C
Altitude (Non-Operating) 12,192 m
 

Size and Weight

Dimensions (HWD) 350 mm x 1450 mm x 220 mm
(8.66" x 13.78" x 5.71")
Weight 4.81 kg. (10.6 lbs.)
 

Certifications

CE Certification
UL and cUL Listing
CE Compliant, UL and cUL listed; conforms to
UL 61010-1 (3rd Edition), UL 61010-2-030 (1st Edition)
CAN/CSA C22.2 No. 61010-1-12
 

Warranty and Service

Warranty and Service 3-year warranty; calibration recommended annually.
Optional service programs include extended warranty, upgrades, and calibration services.
 
WaveSurfer 3024z スペック

Vertical - Analog Channels

Analog Bandwidth (Max) 200 MHz
Analog Bandwidth @ 50 Ω (-3 dB) (ProBus Input) 200 MHz
(≥2.35 mV/div)
Analog Bandwidth @ 1 MΩ (-3 dB) (ProBus Input) 200 MHz (typical)
Rise Time (10-90%, 50 Ω) 1.75 ns (Typical)
Input Channels 4
Vertical Resolution 8 bits; up to 11 bits with enhanced resolution (ERES)
Sensitivity 1 MΩ: 1 mV/div - 10 V/div, fully variable;
50 Ω: 1 mV/div - 1 V/div, fully variable
DC Vertical Gain Accuracy (Gain Component of DC Accuracy) ±(1.5%) Full Scale, offset at 0 V > 5mV; ±(2.5%) < 5mV
Channel-Channel Isolation 40 dB from DC - 100 MHz
33 dB > 100 MHz
(For any two ProBus input channels, same v/div settings, typical)
Offset Range 50Ω
±2V: 1mV/div-19.8mV/div
±5V: 20mV/div-100mV/div
±20V: 102mV/div-198mV/div
±50V: 200mV/div-1V/div

1MΩ
±2V: 1mV/div-19.8mV/div
±5V: 20mV/div-100mV/div
±20V: 102mV/div-198mV/div
±50V: 200mV/div-1V/div
±200V: 1.02V/div-1.98V/div
±400V: 2V/div-10V/div
Maximum Input Voltage 1 MΩ: 400 V max (DC + Peak AC ≤ 10 KHz), 50 Ω: 5 VRMS
Input Coupling AC, DC, GND
Input Impedance 1 MΩ ± 2.0% || 16 pF, 50 Ω ± 2.0%
Bandwidth Limiters 20 MHz
 

Horizontal - Analog Channels

Timebases Internal timebase common to 4 input channels
Acquisition Modes Real-time, Roll, Random Interleaved Sampling (RIS), Sequence
Time/Division Range 500 ps/div - 50 s/div
RIS available at ≤ 10 ns/div;
Roll Mode available at ≥ 100 ms/div and ≤ 5 MS/s
Clock Accuracy 10 ppm > 1 ms interval
Delta Time Measurement Accuracy \sqrt{2}*\sqrt{(\frac{Noise}{SlewRate})^2+(Sample Clock Jitter)^2) (RMS)+(clock accuracy*reading)(seconds)
Jitter Measurement Floor \sqrt{(\frac{Noise}{SlewRate})^2+(Sample Clock Jitter)^2\; seconds\; rms\; (TIE)}
Channel-Channel Deskew Range ±9 x time/div. setting, 100 ms max., each channel
 

Acquisition - Analog Channels

Sample Rate (Single-shot) 4 GS/s on 2 Ch
2 GS/s on 4 Ch
Sample Rate (Repetitive) 50 GS/s for repetitive signals (2 ns/div to 10 ns/div)
Memory Length (4 Ch / 2 Ch / 1Ch)
(Number of Segments)
10M / 20M / 20M
(1000)
Enhanced Resolution (ERES) 8 bits; up to 11 bits with enhanced resolution (ERES)
 

Vertical, Horizontal, Acquisition - Digital Channels

Maximum Input Frequency 125 MHz
Minimum Detectable Pulse Width 4 ns
Input Channels 16
Input Impedance (Flying Leads) 100 kΩ || 5 pF
Input Dynamic Range ±20V
Maximum Input Voltage ±30V Peak
Maximum Input Voltage Swing 500mVpp
Threshold Groupings Pod 2: D15 - D8, Pod 1: D7 - D0
Threshold Selections TTL (+1.4V), 5V CMOS (+2.5V), ECL (-1.3V), or User Defined
Threshold Accuracy ±(3% of threshold setting + 100mV)
User Defined Threshold Range ±10V in 20 mV steps
Sample Rate 500 MS/s
Record Length 10 MS - 16 Channels
Channel-to-Channel Skew ±(1 digital sample)
 

Triggering System

Modes Normal, Auto, Single, Stop
Sources Ch 1 - Ch 4, EXT, EXT/5, AC Line
Coupling AC, DC, LF Rej, HF Rej,
Pre-trigger Delay 0 - 100% Full Scale
Post-trigger Delay 0 - 10,000 Divisions
Hold-off 10 ns up to 20s
Internal Trigger Level Range ±4.1 Divisions
External Trigger Level Range Ext: ±0.61 V, EXT/5: ±3.05 V
Trigger Sensitivity with Edge Trigger ProBus Inputs 0.8 division: DC - 10 MHz
1.5 division: 10 MHz - 200 MHz
Trigger Sensitivity with Edge Trigger (Aux Input) Ext: 200 mV from DC to 10 MHz
300 mV from 10 MHz to 200 MHz
Ext/5: 1 V from DC to 10 MHz
1.5 V from 10 MHz to 200 MHz
 

Trigger Types

Edge Triggers when signal meets slope (positive, negative, or either) and level condition.
Width Triggers on positive or negative glitches with selectable widths.
Minimum width 500 ps, maximum width: 20 s
Window Triggers when signal exits a window defined by adjustable thresholds
Pattern Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pattern.
TV-Composite Video Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative).
Runt Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
Slew Rate Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
Interval Triggers on intervals selectable between 1 ns and 20 s.
Dropout Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
Multi-Stage: Qualified (Timeout or State/Edge Qualified) Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
 

Low Speed Serial Protocol Trigger (Optional)

Supported Protocols I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN1.1, CAN2.0, CAN FD, LIN, FlexRay, AudioBus (I2S, LJ, RJ, TDM)
 

Measurement Tools

Measurement Functionality Display up to 6 measurement parameters together with statistics, including mean, minimum, maximum, standard deviation, and total number. Each occurrence of each parameter is measured and added to the statistics table. Histicons provide a fast, dynamic view of parameters and waveshape characteristics. Parameter gates define the location for measurement on the source waveform.
Measurement Parameters - Horizontal + Jitter Delay (from trigger, 50%), Duty Cycle, Edges , Fall Time (90-10, 80-20), Frequency, Period, Δ Period, Phase, Rise Time (10-90, 20-80), Skew, Width+, Width-
Measurement Parameters - Vertical Amplitude, Base, Maximum, Mean, Minimum, Peak-to-Peak, RMS, Std. Deviation, Top.
Measurement Parameters - Pulse Area, Base, Fall Time (90-10, 80-20), Overshoot (positive, negative), Rise Time (10-90, 80-20), Top, Width+, Width-
 

Math Tools

Math Functionality Display up to 2 math functions traces (F1-F2). The easy-to-use graphical interface simplifies setup of up to two operations on each function trace, and function traces can be chained together to perform math-on-math.
Math Operators - Basic Math Average (summed), Average (continuous), Difference (-), Envelope, Exp (base e, base 10), Floor, Invert (negate), Log (base e, base 10), Product (x), Ratio (/), Reciprocal, Rescale (with units), Roof, Sum (+).
Math Operators - Filters Enhanced resolution (to 11 bits vertical)
Math Operators - Frequency Analysis FFT (power spectrum, magnitude), up to full record length. Select from Rectangular, VonHann, Hamming, FlatTop and Blackman Harris windows.
Math Operators - Functions Derivative, Integral, Invert (negate), Rescale (with units), Square, Square root, Zoom (identity).
 

Measurement and Math Integration

Measurement and Math Integration Trend (datalog) of up to 1000 measurement parameters
 

Pass/Fail Testing

Pass/Fail Testing Mask Test (pre-defined or user-defined mask, waveform All In, All Out, Any In, or Any Out conditions) with following THEN Save (waveforms), Stop, Alarm, (send) Pulse, Hardcopy (send email, save screen image, save to clipboard, send to printer), or (save) LabNotebook.
 

Display System

Size Color 10.1" widescreen flat panel TFT-LCD with high resolution capacitive touch screen
Resolution 1024 x 600
Number of traces Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces.
Grid Styles Auto, Single,X-Y, Single+X-Y
 

Persistence Display

Analog and Color-Graded Persistence Variable saturation levels; stores each trace’s persistence data in memory
Persistence Types Select analog or color
Trace Selection Activate persistence on all traces
Persistence Aging Select from 1.00 s to infinity
 

Zoom Expansion Traces

Zoom Expansion Traces Display up to 4 Zoom and 2 Math/Zoom traces
 

Internal Waveform Memory

Internal Waveform Memory 2 active waveform memory traces (M1-M2) store 16 bit/point full length waveforms. Waveforms can be stored to 2 file loacations on the scope or on the microSD, limited only by the data storage media capacity
 

Setup Storage

Front Panel and Instrument Status Store to the internal microSD, over the network, or to a USB-connected peripheral device.
 

Automatic Setup

Auto Setup Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals
Find Vertical Scale Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range
 

Calibration

Auto Calibration Ensures specified DC and timing accuracy is maintained for 1 year minimum.
 

Processor/CPU

Type TI AM5728 Sitara Processor
Processor Memory 2 GB
Operating System Microsoft Windows CE
Oscilloscope Operating Software Teledyne LeCroy MAUI™
Real Time Clock Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks.
 

Connectivity

Ethernet Port Supports 10/100BaseT Ethernet interface (RJ45 port)
USB Host Ports (4) USB 2.0 Ports Total - (2) Front USB 2.0 Ports
USB Device Port 1 USBTMC port
GPIB Port (optional) Supports IEEE - 488.2 (External)
External Monitor Port Standard DB-15 connector (support resolution of 1024x600)
Remote Control Via Windows Automation, or via LeCroy Remote Command Set
Network Communication Standard VXI-11 or VICP, LXI Compatible
 

Auxiliary Input

Signal Types Select External Trigger on the rear panel
Coupling 50 Ω: DC; 1 MΩ: AC, DC, GND
Max. Input Voltage 50 Ω: 5 Vrms; 1 MΩ: 250 Vmax (DC + Peak AC ≤ 10 kHz)
 

Auxiliary Output

Signal Types Always Trig Out
Output Signal 3.3 V into 1 MΩ pulse > 1.3 ms
Control Signals Trigger out
Connector Type BNC, located on back
 

Probes

Probes Qty. (4) ÷10 Passive Probes
Probe System ProBus. Automatically detects and supports a variety of compatible probes
Scale Factors Automatically or manually selected depending on probe used
Calibration Output Default is 1kHz square wave, 3.3Vp-p (typical), output to probe hook. Settable from 500 Hz to 1 MHz square wave
 

Power Requirements

Voltage 100 - 240 VAC, 50 Hz - 60 Hz ±5%
100 - 120 VAC, 400 Hz ±5%
Max. Power Consumption 330 VA
 

Environmental

Temperature (Operating) 0 °C to 50 °C
Temperature (Non-Operating) '-30 °C to 70 °C
Humidity (Operating) 90% RH, 30 °C
50% RH, 50 °C
Humidity (Non-Operating) 95% RH
Altitude (Operating) 3,048 m max at <=25C
Altitude (Non-Operating) 12,192 m
 

Size and Weight

Dimensions (HWD) 350 mm x 1450 mm x 220 mm
(8.66" x 13.78" x 5.71")
Weight 4.81 kg. (10.6 lbs.)
 

Certifications

CE Certification
UL and cUL Listing
CE Compliant, UL and cUL listed; conforms to
UL 61010-1 (3rd Edition), UL 61010-2-030 (1st Edition)
CAN/CSA C22.2 No. 61010-1-12
 

Warranty and Service

Warranty and Service 3-year warranty; calibration recommended annually.
Optional service programs include extended warranty, upgrades, and calibration services.
 
WaveSurfer 3034z スペック

Vertical - Analog Channels

Analog Bandwidth (Max) 350 MHz
Analog Bandwidth @ 50 Ω (-3 dB) (ProBus Input) 350 MHz
(≥2.35 mV/div)
Analog Bandwidth @ 1 MΩ (-3 dB) (ProBus Input) 350 MHz (typical)
Rise Time (10-90%, 50 Ω) 1 ns (Typical)
Input Channels 4
Vertical Resolution 8 bits; up to 11 bits with enhanced resolution (ERES)
Sensitivity 1 MΩ: 1 mV/div - 10 V/div, fully variable;
50 Ω: 1 mV/div - 1 V/div, fully variable
DC Vertical Gain Accuracy (Gain Component of DC Accuracy) ±(1.5%) Full Scale, offset at 0 V > 5mV; ±(2.5%) < 5mV
Channel-Channel Isolation 40 dB from DC - 100 MHz
33 dB > 100 MHz
(For any two ProBus input channels, same v/div settings, typical)
Offset Range 50Ω
±2V: 1mV/div-19.8mV/div
±5V: 20mV/div-100mV/div
±20V: 102mV/div-198mV/div
±50V: 200mV/div-1V/div

1MΩ
±2V: 1mV/div-19.8mV/div
±5V: 20mV/div-100mV/div
±20V: 102mV/div-198mV/div
±50V: 200mV/div-1V/div
±200V: 1.02V/div-1.98V/div
±400V: 2V/div-10V/div
Maximum Input Voltage 1 MΩ: 400 V max (DC + Peak AC ≤ 10 KHz), 50 Ω: 5 VRMS
Input Coupling AC, DC, GND
Input Impedance 1 MΩ ± 2.0% || 16 pF, 50 Ω ± 2.0%
Bandwidth Limiters 20 MHz
 

Horizontal - Analog Channels

Timebases Internal timebase common to 4 input channels
Acquisition Modes Real-time, Roll, Random Interleaved Sampling (RIS), Sequence
Time/Division Range 500 ps/div - 50 s/div
RIS available at ≤ 10 ns/div;
Roll Mode available at ≥ 100 ms/div and ≤ 5 MS/s
Clock Accuracy 10 ppm > 1 ms interval
Delta Time Measurement Accuracy \sqrt{2}*\sqrt{(\frac{Noise}{SlewRate})^2+(Sample Clock Jitter)^2) (RMS)+(clock accuracy*reading)(seconds)
Jitter Measurement Floor \sqrt{(\frac{Noise}{SlewRate})^2+(Sample Clock Jitter)^2\; seconds\; rms\; (TIE)}
Channel-Channel Deskew Range ±9 x time/div. setting, 100 ms max., each channel
 

Acquisition - Analog Channels

Sample Rate (Single-shot) 4 GS/s on 2 Ch
2 GS/s on 4 Ch
Sample Rate (Repetitive) 50 GS/s for repetitive signals (2 ns/div to 10 ns/div)
Memory Length (4 Ch / 2 Ch / 1Ch)
(Number of Segments)
10M / 20M / 20M
(1000)
Enhanced Resolution (ERES) 8 bits; up to 11 bits with enhanced resolution (ERES)
 

Vertical, Horizontal, Acquisition - Digital Channels

Maximum Input Frequency 125 MHz
Minimum Detectable Pulse Width 4 ns
Input Channels 16
Input Impedance (Flying Leads) 100 kΩ || 5 pF
Input Dynamic Range ±20V
Maximum Input Voltage ±30V Peak
Maximum Input Voltage Swing 500mVpp
Threshold Groupings Pod 2: D15 - D8, Pod 1: D7 - D0
Threshold Selections TTL (+1.4V), 5V CMOS (+2.5V), ECL (-1.3V), or User Defined
Threshold Accuracy ±(3% of threshold setting + 100mV)
User Defined Threshold Range ±10V in 20 mV steps
Sample Rate 500 MS/s
Record Length 10 MS - 16 Channels
Channel-to-Channel Skew ±(1 digital sample)
 

Triggering System

Modes Normal, Auto, Single, Stop
Sources Ch 1 - Ch 4, EXT, EXT/5, AC Line
Coupling AC, DC, LF Rej, HF Rej,
Pre-trigger Delay 0 - 100% Full Scale
Post-trigger Delay 0 - 10,000 Divisions
Hold-off 10 ns up to 20s
Internal Trigger Level Range ±4.1 Divisions
External Trigger Level Range Ext: ±0.61 V, EXT/5: ±3.05 V
Trigger Sensitivity with Edge Trigger ProBus Inputs 0.8 division: DC - 10 MHz
1.5 division: 10 MHz - 200 MHz
Trigger Sensitivity with Edge Trigger (Aux Input) Ext: 200 mV from DC to 10 MHz
300 mV from 10 MHz to 200 MHz
Ext/5: 1 V from DC to 10 MHz
1.5 V from 10 MHz to 200 MHz
 

Trigger Types

Edge Triggers when signal meets slope (positive, negative, or either) and level condition.
Width Triggers on positive or negative glitches with selectable widths.
Minimum width 500 ps, maximum width: 20 s
Window Triggers when signal exits a window defined by adjustable thresholds
Pattern Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pattern.
TV-Composite Video Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative).
Runt Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
Slew Rate Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
Interval Triggers on intervals selectable between 1 ns and 20 s.
Dropout Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
Multi-Stage: Qualified (Timeout or State/Edge Qualified) Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
 

Low Speed Serial Protocol Trigger (Optional)

Supported Protocols I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN1.1, CAN2.0, CAN FD, LIN, FlexRay, AudioBus (I2S, LJ, RJ, TDM)
 

Measurement Tools

Measurement Functionality Display up to 6 measurement parameters together with statistics, including mean, minimum, maximum, standard deviation, and total number. Each occurrence of each parameter is measured and added to the statistics table. Histicons provide a fast, dynamic view of parameters and waveshape characteristics. Parameter gates define the location for measurement on the source waveform.
Measurement Parameters - Horizontal + Jitter Delay (from trigger, 50%), Duty Cycle, Edges , Fall Time (90-10, 80-20), Frequency, Period, Δ Period, Phase, Rise Time (10-90, 20-80), Skew, Width+, Width-
Measurement Parameters - Vertical Amplitude, Base, Maximum, Mean, Minimum, Peak-to-Peak, RMS, Std. Deviation, Top.
Measurement Parameters - Pulse Area, Base, Fall Time (90-10, 80-20), Overshoot (positive, negative), Rise Time (10-90, 80-20), Top, Width+, Width-
 

Math Tools

Math Functionality Display up to 2 math functions traces (F1-F2). The easy-to-use graphical interface simplifies setup of up to two operations on each function trace, and function traces can be chained together to perform math-on-math.
Math Operators - Basic Math Average (summed), Average (continuous), Difference (-), Envelope, Exp (base e, base 10), Floor, Invert (negate), Log (base e, base 10), Product (x), Ratio (/), Reciprocal, Rescale (with units), Roof, Sum (+).
Math Operators - Filters Enhanced resolution (to 11 bits vertical)
Math Operators - Frequency Analysis FFT (power spectrum, magnitude), up to full record length. Select from Rectangular, VonHann, Hamming, FlatTop and Blackman Harris windows.
Math Operators - Functions Derivative, Integral, Invert (negate), Rescale (with units), Square, Square root, Zoom (identity).
 

Measurement and Math Integration

Measurement and Math Integration Trend (datalog) of up to 1000 measurement parameters
 

Pass/Fail Testing

Pass/Fail Testing Mask Test (pre-defined or user-defined mask, waveform All In, All Out, Any In, or Any Out conditions) with following THEN Save (waveforms), Stop, Alarm, (send) Pulse, Hardcopy (send email, save screen image, save to clipboard, send to printer), or (save) LabNotebook.
 

Display System

Size Color 10.1" widescreen flat panel TFT-LCD with high resolution capacitive touch screen
Resolution 1024 x 600
Number of traces Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces.
Grid Styles Auto, Single,X-Y, Single+X-Y
 

Persistence Display

Analog and Color-Graded Persistence Variable saturation levels; stores each trace’s persistence data in memory
Persistence Types Select analog or color
Trace Selection Activate persistence on all traces
Persistence Aging Select from 1.00 s to infinity
 

Zoom Expansion Traces

Zoom Expansion Traces Display up to 4 Zoom and 2 Math/Zoom traces
 

Internal Waveform Memory

Internal Waveform Memory 2 active waveform memory traces (M1-M2) store 16 bit/point full length waveforms. Waveforms can be stored to 2 file loacations on the scope or on the microSD, limited only by the data storage media capacity
 

Setup Storage

Front Panel and Instrument Status Store to the internal microSD, over the network, or to a USB-connected peripheral device.
 

Automatic Setup

Auto Setup Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals
Find Vertical Scale Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range
 

Calibration

Auto Calibration Ensures specified DC and timing accuracy is maintained for 1 year minimum.
 

Processor/CPU

Type TI AM5728 Sitara Processor
Processor Memory 2 GB
Operating System Microsoft Windows CE
Oscilloscope Operating Software Teledyne LeCroy MAUI™
Real Time Clock Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks.
 

Connectivity

Ethernet Port Supports 10/100BaseT Ethernet interface (RJ45 port)
USB Host Ports (4) USB 2.0 Ports Total - (2) Front USB 2.0 Ports
USB Device Port 1 USBTMC port
GPIB Port (optional) Supports IEEE - 488.2 (External)
External Monitor Port Standard DB-15 connector (support resolution of 1024x600)
Remote Control Via Windows Automation, or via LeCroy Remote Command Set
Network Communication Standard VXI-11 or VICP, LXI Compatible
 

Auxiliary Input

Signal Types Select External Trigger on the rear panel
Coupling 50 Ω: DC; 1 MΩ: AC, DC, GND
Max. Input Voltage 50 Ω: 5 Vrms; 1 MΩ: 250 Vmax (DC + Peak AC ≤ 10 kHz)
 

Auxiliary Output

Signal Types Always Trig Out
Output Signal 3.3 V into 1 MΩ pulse > 1.3 ms
Control Signals Trigger out
Connector Type BNC, located on back
 

Probes

Probes Qty. (4) ÷10 Passive Probes
Probe System ProBus. Automatically detects and supports a variety of compatible probes
Scale Factors Automatically or manually selected depending on probe used
Calibration Output Default is 1kHz square wave, 3.3Vp-p (typical), output to probe hook. Settable from 500 Hz to 1 MHz square wave
 

Power Requirements

Voltage 100 - 240 VAC, 50 Hz - 60 Hz ±5%
100 - 120 VAC, 400 Hz ±5%
Max. Power Consumption 330 VA
 

Environmental

Temperature (Operating) 0 °C to 50 °C
Temperature (Non-Operating) '-30 °C to 70 °C
Humidity (Operating) 90% RH, 30 °C
50% RH, 50 °C
Humidity (Non-Operating) 95% RH
Altitude (Operating) 3,048 m max at <=25C
Altitude (Non-Operating) 12,192 m
 

Size and Weight

Dimensions (HWD) 350 mm x 1450 mm x 220 mm
(8.66" x 13.78" x 5.71")
Weight 4.81 kg. (10.6 lbs.)
 

Certifications

CE Certification
UL and cUL Listing
CE Compliant, UL and cUL listed; conforms to
UL 61010-1 (3rd Edition), UL 61010-2-030 (1st Edition)
CAN/CSA C22.2 No. 61010-1-12
 

Warranty and Service

Warranty and Service 3-year warranty; calibration recommended annually.
Optional service programs include extended warranty, upgrades, and calibration services.
 
WaveSurfer 3054z スペック

Vertical - Analog Channels

Analog Bandwidth (Max) 500 MHz
Analog Bandwidth @ 50 Ω (-3 dB) (ProBus Input) 500 MHz
(≥2.35 mV/div)
Analog Bandwidth @ 1 MΩ (-3 dB) (ProBus Input) 500 MHz (typical)
Rise Time (10-90%, 50 Ω) 800 ps (Typical)
Input Channels 4
Vertical Resolution 8 bits; up to 11 bits with enhanced resolution (ERES)
Sensitivity 1 MΩ: 1 mV/div - 10 V/div, fully variable;
50 Ω: 1 mV/div - 1 V/div, fully variable
DC Vertical Gain Accuracy (Gain Component of DC Accuracy) ±(1.5%) Full Scale, offset at 0 V > 5mV; ±(2.5%) < 5mV
Channel-Channel Isolation 40 dB from DC - 100 MHz
33 dB > 100 MHz
(For any two ProBus input channels, same v/div settings, typical)
Offset Range 50Ω
±2V: 1mV/div-19.8mV/div
±5V: 20mV/div-100mV/div
±20V: 102mV/div-198mV/div
±50V: 200mV/div-1V/div

1MΩ
±2V: 1mV/div-19.8mV/div
±5V: 20mV/div-100mV/div
±20V: 102mV/div-198mV/div
±50V: 200mV/div-1V/div
±200V: 1.02V/div-1.98V/div
±400V: 2V/div-10V/div
Maximum Input Voltage 1 MΩ: 400 V max (DC + Peak AC ≤ 10 KHz), 50 Ω: 5 VRMS
Input Coupling AC, DC, GND
Input Impedance 1 MΩ ± 2.0% || 16 pF, 50 Ω ± 2.0%
Bandwidth Limiters 20 MHz
 

Horizontal - Analog Channels

Timebases Internal timebase common to 4 input channels
Acquisition Modes Real-time, Roll, Random Interleaved Sampling (RIS), Sequence
Time/Division Range 500 ps/div - 50 s/div
RIS available at ≤ 10 ns/div;
Roll Mode available at ≥ 100 ms/div and ≤ 5 MS/s
Clock Accuracy 10 ppm > 1 ms interval
Delta Time Measurement Accuracy \sqrt{2}*\sqrt{(\frac{Noise}{SlewRate})^2+(Sample Clock Jitter)^2) (RMS)+(clock accuracy*reading)(seconds)
Jitter Measurement Floor \sqrt{(\frac{Noise}{SlewRate})^2+(Sample Clock Jitter)^2\; seconds\; rms\; (TIE)}
Channel-Channel Deskew Range ±9 x time/div. setting, 100 ms max., each channel
 

Acquisition - Analog Channels

Sample Rate (Single-shot) 4 GS/s on 2 Ch
2 GS/s on 4 Ch
Sample Rate (Repetitive) 50 GS/s for repetitive signals (1 ns/div to 10 ns/div)
Memory Length (4 Ch / 2 Ch / 1Ch)
(Number of Segments)
10M / 20M / 20M
(1000)
Enhanced Resolution (ERES) 8 bits; up to 11 bits with enhanced resolution (ERES)
 

Vertical, Horizontal, Acquisition - Digital Channels

Maximum Input Frequency 125 MHz
Minimum Detectable Pulse Width 4 ns
Input Channels 16
Input Impedance (Flying Leads) 100 kΩ || 5 pF
Input Dynamic Range ±20V
Maximum Input Voltage ±30V Peak
Maximum Input Voltage Swing 500mVpp
Threshold Groupings Pod 2: D15 - D8, Pod 1: D7 - D0
Threshold Selections TTL (+1.4V), 5V CMOS (+2.5V), ECL (-1.3V), or User Defined
Threshold Accuracy ±(3% of threshold setting + 100mV)
User Defined Threshold Range ±10V in 20 mV steps
Sample Rate 500 MS/s
Record Length 10 MS - 16 Channels
Channel-to-Channel Skew ±(1 digital sample)
 

Triggering System

Modes Normal, Auto, Single, Stop
Sources Ch 1 - Ch 4, EXT, EXT/5, AC Line
Coupling AC, DC, LF Rej, HF Rej,
Pre-trigger Delay 0 - 100% Full Scale
Post-trigger Delay 0 - 10,000 Divisions
Hold-off 10 ns up to 20s
Internal Trigger Level Range ±4.1 Divisions
External Trigger Level Range Ext: ±0.61 V, EXT/5: ±3.05 V
Trigger Sensitivity with Edge Trigger ProBus Inputs 0.8 division: DC - 10 MHz
1.5 division: 10 MHz - 200 MHz
Trigger Sensitivity with Edge Trigger (Aux Input) Ext: 200 mV from DC to 10 MHz
300 mV from 10 MHz to 200 MHz
Ext/5: 1 V from DC to 10 MHz
1.5 V from 10 MHz to 200 MHz
 

Trigger Types

Edge Triggers when signal meets slope (positive, negative, or either) and level condition.
Width Triggers on positive or negative glitches with selectable widths.
Minimum width 500 ps, maximum width: 20 s
Window Triggers when signal exits a window defined by adjustable thresholds
Pattern Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pattern.
TV-Composite Video Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative).
Runt Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
Slew Rate Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
Interval Triggers on intervals selectable between 1 ns and 20 s.
Dropout Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
Multi-Stage: Qualified (Timeout or State/Edge Qualified) Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
 

Low Speed Serial Protocol Trigger (Optional)

Supported Protocols I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN1.1, CAN2.0, CAN FD, LIN, FlexRay, AudioBus (I2S, LJ, RJ, TDM)
 

Measurement Tools

Measurement Functionality Display up to 6 measurement parameters together with statistics, including mean, minimum, maximum, standard deviation, and total number. Each occurrence of each parameter is measured and added to the statistics table. Histicons provide a fast, dynamic view of parameters and waveshape characteristics. Parameter gates define the location for measurement on the source waveform.
Measurement Parameters - Horizontal + Jitter Delay (from trigger, 50%), Duty Cycle, Edges , Fall Time (90-10, 80-20), Frequency, Period, Δ Period, Phase, Rise Time (10-90, 20-80), Skew, Width+, Width-
Measurement Parameters - Vertical Amplitude, Base, Maximum, Mean, Minimum, Peak-to-Peak, RMS, Std. Deviation, Top.
Measurement Parameters - Pulse Area, Base, Fall Time (90-10, 80-20), Overshoot (positive, negative), Rise Time (10-90, 80-20), Top, Width+, Width-
 

Math Tools

Math Functionality Display up to 2 math functions traces (F1-F2). The easy-to-use graphical interface simplifies setup of up to two operations on each function trace, and function traces can be chained together to perform math-on-math.
Math Operators - Basic Math Average (summed), Average (continuous), Difference (-), Envelope, Exp (base e, base 10), Floor, Invert (negate), Log (base e, base 10), Product (x), Ratio (/), Reciprocal, Rescale (with units), Roof, Sum (+).
Math Operators - Filters Enhanced resolution (to 11 bits vertical)
Math Operators - Frequency Analysis FFT (power spectrum, magnitude), up to full record length. Select from Rectangular, VonHann, Hamming, FlatTop and Blackman Harris windows.
Math Operators - Functions Derivative, Integral, Invert (negate), Rescale (with units), Square, Square root, Zoom (identity).
 

Measurement and Math Integration

Measurement and Math Integration Trend (datalog) of up to 1000 measurement parameters
 

Pass/Fail Testing

Pass/Fail Testing Mask Test (pre-defined or user-defined mask, waveform All In, All Out, Any In, or Any Out conditions) with following THEN Save (waveforms), Stop, Alarm, (send) Pulse, Hardcopy (send email, save screen image, save to clipboard, send to printer), or (save) LabNotebook.
 

Display System

Size Color 10.1" widescreen flat panel TFT-LCD with high resolution capacitive touch screen
Resolution 1024 x 600
Number of traces Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces.
Grid Styles Auto, Single,X-Y, Single+X-Y
 

Persistence Display

Analog and Color-Graded Persistence Variable saturation levels; stores each trace’s persistence data in memory
Persistence Types Select analog or color
Trace Selection Activate persistence on all traces
Persistence Aging Select from 1.00 s to infinity
 

Zoom Expansion Traces

Zoom Expansion Traces Display up to 4 Zoom and 2 Math/Zoom traces
 

Internal Waveform Memory

Internal Waveform Memory 2 active waveform memory traces (M1-M2) store 16 bit/point full length waveforms. Waveforms can be stored to 2 file loacations on the scope or on the microSD, limited only by the data storage media capacity
 

Setup Storage

Front Panel and Instrument Status Store to the internal microSD, over the network, or to a USB-connected peripheral device.
 

Automatic Setup

Auto Setup Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals
Find Vertical Scale Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range
 

Calibration

Auto Calibration Ensures specified DC and timing accuracy is maintained for 1 year minimum.
 

Processor/CPU

Type TI AM5728 Sitara Processor
Processor Memory 2 GB
Operating System Microsoft Windows CE
Oscilloscope Operating Software Teledyne LeCroy MAUI™
Real Time Clock Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks.
 

Connectivity

Ethernet Port Supports 10/100BaseT Ethernet interface (RJ45 port)
USB Host Ports (4) USB 2.0 Ports Total - (2) Front USB 2.0 Ports
USB Device Port 1 USBTMC port
GPIB Port (optional) Supports IEEE - 488.2 (External)
External Monitor Port Standard DB-15 connector (support resolution of 1024x600)
Remote Control Via Windows Automation, or via LeCroy Remote Command Set
Network Communication Standard VXI-11 or VICP, LXI Compatible
 

Auxiliary Input

Signal Types Select External Trigger on the rear panel
Coupling 50 Ω: DC; 1 MΩ: AC, DC, GND
Max. Input Voltage 50 Ω: 5 Vrms; 1 MΩ: 250 Vmax (DC + Peak AC ≤ 10 kHz)
 

Auxiliary Output

Signal Types Always Trig Out
Output Signal 3.3 V into 1 MΩ pulse > 1.3 ms
Control Signals Trigger out
Connector Type BNC, located on back
 

Probes

Probes Qty. (4) ÷10 Passive Probes
Probe System ProBus. Automatically detects and supports a variety of compatible probes
Scale Factors Automatically or manually selected depending on probe used
Calibration Output Default is 1kHz square wave, 3.3Vp-p (typical), output to probe hook. Settable from 500 Hz to 1 MHz square wave
 

Power Requirements

Voltage 100 - 240 VAC, 50 Hz - 60 Hz ±5%
100 - 120 VAC, 400 Hz ±5%
Max. Power Consumption 330 VA
 

Environmental

Temperature (Operating) 0 °C to 50 °C
Temperature (Non-Operating) '-30 °C to 70 °C
Humidity (Operating) 90% RH, 30 °C
50% RH, 50 °C
Humidity (Non-Operating) 95% RH
Altitude (Operating) 3,048 m max at <=25C
Altitude (Non-Operating) 12,192 m
 

Size and Weight

Dimensions (HWD) 350 mm x 1450 mm x 220 mm
(8.66" x 13.78" x 5.71")
Weight 4.81 kg. (10.6 lbs.)
 

Certifications

CE Certification
UL and cUL Listing
CE Compliant, UL and cUL listed; conforms to
UL 61010-1 (3rd Edition), UL 61010-2-030 (1st Edition)
CAN/CSA C22.2 No. 61010-1-12
 

Warranty and Service

Warranty and Service 3-year warranty; calibration recommended annually.
Optional service programs include extended warranty, upgrades, and calibration services.
 
WaveSurfer 3104z スペック

Vertical - Analog Channels

Analog Bandwidth (Max) 1 GHz
Analog Bandwidth @ 50 Ω (-3 dB) (ProBus Input) 1 GHz
(≥2.35 mV/div)
Analog Bandwidth @ 1 MΩ (-3 dB) (ProBus Input) 500 MHz (typical)
Rise Time (10-90%, 50 Ω) 430 ps (Typical)
Input Channels 4
Vertical Resolution 8 bits; up to 11 bits with enhanced resolution (ERES)
Sensitivity 1 MΩ: 1 mV/div - 10 V/div, fully variable;
50 Ω: 1 mV/div - 1 V/div, fully variable
DC Vertical Gain Accuracy (Gain Component of DC Accuracy) ±(1.5%) Full Scale, offset at 0 V > 5mV; ±(2.5%) < 5mV
Channel-Channel Isolation 40 dB from DC - 100 MHz
33 dB > 100 MHz
(For any two ProBus input channels, same v/div settings, typical)
Offset Range 50Ω
±2V: 1mV/div-19.8mV/div
±5V: 20mV/div-100mV/div
±20V: 102mV/div-198mV/div
±50V: 200mV/div-1V/div

1MΩ
±2V: 1mV/div-19.8mV/div
±5V: 20mV/div-100mV/div
±20V: 102mV/div-198mV/div
±50V: 200mV/div-1V/div
±200V: 1.02V/div-1.98V/div
±400V: 2V/div-10V/div
Maximum Input Voltage 1 MΩ: 400 V max (DC + Peak AC ≤ 10 KHz), 50 Ω: 5 VRMS
Input Coupling AC, DC, GND
Input Impedance 1 MΩ ± 2.0% || 16 pF, 50 Ω ± 2.0%
Bandwidth Limiters 20 MHz
 

Horizontal - Analog Channels

Timebases Internal timebase common to 4 input channels
Acquisition Modes Real-time, Roll, Random Interleaved Sampling (RIS), Sequence
Time/Division Range 500 ps/div - 50 s/div
RIS available at ≤ 10 ns/div;
Roll Mode available at ≥ 100 ms/div and ≤ 5 MS/s
Clock Accuracy 10 ppm > 1 ms interval
Delta Time Measurement Accuracy \sqrt{2}*\sqrt{(\frac{Noise}{SlewRate})^2+(Sample Clock Jitter)^2) (RMS)+(clock accuracy*reading)(seconds)
Jitter Measurement Floor \sqrt{(\frac{Noise}{SlewRate})^2+(Sample Clock Jitter)^2\; seconds\; rms\; (TIE)}
Channel-Channel Deskew Range ±9 x time/div. setting, 100 ms max., each channel
 

Acquisition - Analog Channels

Sample Rate (Single-shot) 4 GS/s on 2 Ch
2 GS/s on 4 Ch
Sample Rate (Repetitive) 50 GS/s for repetitive signals (500 ps/div to 10 ns/div)
Memory Length (4 Ch / 2 Ch / 1Ch)
(Number of Segments)
10M / 20M / 20M
(1000)
Enhanced Resolution (ERES) 8 bits; up to 11 bits with enhanced resolution (ERES)
 

Vertical, Horizontal, Acquisition - Digital Channels

Maximum Input Frequency 125 MHz
Minimum Detectable Pulse Width 4 ns
Input Channels 16
Input Impedance (Flying Leads) 100 kΩ || 5 pF
Input Dynamic Range ±20V
Maximum Input Voltage ±30V Peak
Maximum Input Voltage Swing 500mVpp
Threshold Groupings Pod 2: D15 - D8, Pod 1: D7 - D0
Threshold Selections TTL (+1.4V), 5V CMOS (+2.5V), ECL (-1.3V), or User Defined
Threshold Accuracy ±(3% of threshold setting + 100mV)
User Defined Threshold Range ±10V in 20 mV steps
Sample Rate 500 MS/s
Record Length 10 MS - 16 Channels
Channel-to-Channel Skew ±(1 digital sample)
 

Triggering System

Modes Normal, Auto, Single, Stop
Sources Ch 1 - Ch 4, EXT, EXT/5, AC Line
Coupling AC, DC, LF Rej, HF Rej,
Pre-trigger Delay 0 - 100% Full Scale
Post-trigger Delay 0 - 10,000 Divisions
Hold-off 10 ns up to 20s
Internal Trigger Level Range ±4.1 Divisions
External Trigger Level Range Ext: ±0.61 V, EXT/5: ±3.05 V
Trigger Sensitivity with Edge Trigger ProBus Inputs 0.8 division: DC - 10 MHz
1.5 division: 10 MHz - 200 MHz
Trigger Sensitivity with Edge Trigger (Aux Input) Ext: 200 mV from DC to 10 MHz
300 mV from 10 MHz to 200 MHz
Ext/5: 1 V from DC to 10 MHz
1.5 V from 10 MHz to 200 MHz
 

Trigger Types

Edge Triggers when signal meets slope (positive, negative, or either) and level condition.
Width Triggers on positive or negative glitches with selectable widths.
Minimum width 500 ps, maximum width: 20 s
Window Triggers when signal exits a window defined by adjustable thresholds
Pattern Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pattern.
TV-Composite Video Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative).
Runt Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
Slew Rate Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
Interval Triggers on intervals selectable between 1 ns and 20 s.
Dropout Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
Multi-Stage: Qualified (Timeout or State/Edge Qualified) Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
 

Low Speed Serial Protocol Trigger (Optional)

Supported Protocols I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN1.1, CAN2.0, CAN FD, LIN, FlexRay, AudioBus (I2S, LJ, RJ, TDM)
 

Measurement Tools

Measurement Functionality Display up to 6 measurement parameters together with statistics, including mean, minimum, maximum, standard deviation, and total number. Each occurrence of each parameter is measured and added to the statistics table. Histicons provide a fast, dynamic view of parameters and waveshape characteristics. Parameter gates define the location for measurement on the source waveform.
Measurement Parameters - Horizontal + Jitter Delay (from trigger, 50%), Duty Cycle, Edges , Fall Time (90-10, 80-20), Frequency, Period, Δ Period, Phase, Rise Time (10-90, 20-80), Skew, Width+, Width-
Measurement Parameters - Vertical Amplitude, Base, Maximum, Mean, Minimum, Peak-to-Peak, RMS, Std. Deviation, Top.
Measurement Parameters - Pulse Area, Base, Fall Time (90-10, 80-20), Overshoot (positive, negative), Rise Time (10-90, 80-20), Top, Width+, Width-
 

Math Tools

Math Functionality Display up to 2 math functions traces (F1-F2). The easy-to-use graphical interface simplifies setup of up to two operations on each function trace, and function traces can be chained together to perform math-on-math.
Math Operators - Basic Math Average (summed), Average (continuous), Difference (-), Envelope, Exp (base e, base 10), Floor, Invert (negate), Log (base e, base 10), Product (x), Ratio (/), Reciprocal, Rescale (with units), Roof, Sum (+).
Math Operators - Filters Enhanced resolution (to 11 bits vertical)
Math Operators - Frequency Analysis FFT (power spectrum, magnitude), up to full record length. Select from Rectangular, VonHann, Hamming, FlatTop and Blackman Harris windows.
Math Operators - Functions Derivative, Integral, Invert (negate), Rescale (with units), Square, Square root, Zoom (identity).
 

Measurement and Math Integration

Measurement and Math Integration Trend (datalog) of up to 1000 measurement parameters
 

Pass/Fail Testing

Pass/Fail Testing Mask Test (pre-defined or user-defined mask, waveform All In, All Out, Any In, or Any Out conditions) with following THEN Save (waveforms), Stop, Alarm, (send) Pulse, Hardcopy (send email, save screen image, save to clipboard, send to printer), or (save) LabNotebook.
 

Display System

Size Color 10.1" widescreen flat panel TFT-LCD with high resolution capacitive touch screen
Resolution 1024 x 600
Number of traces Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces.
Grid Styles Auto, Single,X-Y, Single+X-Y
 

Persistence Display

Analog and Color-Graded Persistence Variable saturation levels; stores each trace’s persistence data in memory
Persistence Types Select analog or color
Trace Selection Activate persistence on all traces
Persistence Aging Select from 1.00 s to infinity
 

Zoom Expansion Traces

Zoom Expansion Traces Display up to 4 Zoom and 2 Math/Zoom traces
 

Internal Waveform Memory

Internal Waveform Memory 2 active waveform memory traces (M1-M2) store 16 bit/point full length waveforms. Waveforms can be stored to 2 file loacations on the scope or on the microSD, limited only by the data storage media capacity
 

Setup Storage

Front Panel and Instrument Status Store to the internal microSD, over the network, or to a USB-connected peripheral device.
 

Automatic Setup

Auto Setup Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals
Find Vertical Scale Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range
 

Calibration

Auto Calibration Ensures specified DC and timing accuracy is maintained for 1 year minimum.
 

Processor/CPU

Type TI AM5728 Sitara Processor
Processor Memory 2 GB
Operating System Microsoft Windows CE
Oscilloscope Operating Software Teledyne LeCroy MAUI™
Real Time Clock Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks.
 

Connectivity

Ethernet Port Supports 10/100BaseT Ethernet interface (RJ45 port)
USB Host Ports (4) USB 2.0 Ports Total - (2) Front USB 2.0 Ports
USB Device Port 1 USBTMC port
GPIB Port (optional) Supports IEEE - 488.2 (External)
External Monitor Port Standard DB-15 connector (support resolution of 1024x600)
Remote Control Via Windows Automation, or via LeCroy Remote Command Set
Network Communication Standard VXI-11 or VICP, LXI Compatible
 

Auxiliary Input

Signal Types Select External Trigger on the rear panel
Coupling 50 Ω: DC; 1 MΩ: AC, DC, GND
Max. Input Voltage 50 Ω: 5 Vrms; 1 MΩ: 250 Vmax (DC + Peak AC ≤ 10 kHz)
 

Auxiliary Output

Signal Types Always Trig Out
Output Signal 3.3 V into 1 MΩ pulse > 1.3 ms
Control Signals Trigger out
Connector Type BNC, located on back
 

Probes

Probes Qty. (4) ÷10 Passive Probes
Probe System ProBus. Automatically detects and supports a variety of compatible probes
Scale Factors Automatically or manually selected depending on probe used
Calibration Output Default is 1kHz square wave, 3.3Vp-p (typical), output to probe hook. Settable from 500 Hz to 1 MHz square wave
 

Power Requirements

Voltage 100 - 240 VAC, 50 Hz - 60 Hz ±5%
100 - 120 VAC, 400 Hz ±5%
Max. Power Consumption 330 VA
 

Environmental

Temperature (Operating) 0 °C to 50 °C
Temperature (Non-Operating) '-30 °C to 70 °C
Humidity (Operating) 90% RH, 30 °C
50% RH, 50 °C
Humidity (Non-Operating) 95% RH
Altitude (Operating) 3,048 m max at <=25C
Altitude (Non-Operating) 12,192 m
 

Size and Weight

Dimensions (HWD) 350 mm x 1450 mm x 220 mm
(8.66" x 13.78" x 5.71")
Weight 4.81 kg. (10.6 lbs.)
 

Certifications

CE Certification
UL and cUL Listing
CE Compliant, UL and cUL listed; conforms to
UL 61010-1 (3rd Edition), UL 61010-2-030 (1st Edition)
CAN/CSA C22.2 No. 61010-1-12
 

Warranty and Service

Warranty and Service 3-year warranty; calibration recommended annually.
Optional service programs include extended warranty, upgrades, and calibration services.
 
WaveSurfer 3022 スペック

Vertical System

Rise time 1.75 ns
Bandwidth 200 MHz
Input Channels 2
Bandwidth Limiters 20 MHz
Input Impedance 1 MΩ ± 2.0% || 16 pF, 50 Ω ± 2.0%
Input Coupling AC, DC, GND
Maximum Input Voltage 1 MΩ: 400 V max (DC + Peak AC ≦ 10 KHz), 50 Ω: 5 VRMS
Channel-Channel Isolation 40 dB from DC - 100 MHz
33 dB > 100 MHz
Vertical Resolution 8 bits
Sensitivity 1 MΩ: 1 mV/div - 10 V/div
50 Ω: 1 mV/div - 1 V/div
DC Gain Accuracy ±(1.5%) Full Scale, offset at 0 V > 5mV; ±(2.5%) < 5mV
Offset Range 50Ω
±2V: 1mV/div-19.8mV/div
±5V: 20mV/div-100mV/div
±20V: 102mV/div-198mV/div
±50V: 200mV/div-1V/div

1MΩ
±2V: 1mV/div-19.8mV/div
±5V: 20mV/div-100mV/div
±20V: 102mV/div-198mV/div
±50V: 200mV/div-1V/div
±200V: 1.02V/div-1.98V/div
±400V: 2V/div-10V/div
 

Horizontal System

Time/Division Range 2 ns/div - 50 s/div
Clock Accuracy 10 ppm > 1 ms interval
Trigger and Interpolator Jitter 17.5 ps (rms)
 

Acquisition System

Single-Shot Sample Rate/Ch 4 GS/s on 1 Ch
2 GS/s on 2 Ch
Equivalent Sample Rate 50 GS/s
Memory 10 Mpts/Ch
 

Acquisition Modes

Sequence Mode Up to 1,000 segments
 

Digital - Vertical and Acquisition

Input Channels 16
Threshold Groupings Pod 2: D15 - D8, Pod 1: D7 - D0
Threshold Selections TTL (+1.4V), 5V CMOS (+2.5V), ECL (-1.3V), or User Defined
Maximum Input Voltage ±30V Peak
Threshold Accuracy ±(3% of threshold setting + 100mV)
Input Dynamic Range ±20V
Minimum Input Voltage Swing 500mVpp
Input Impedance (Flying Leads) 100 kΩ || 5 pF
Maximum Input Frequency 125 MHz
Sample Rate 500 MS/s
Record Length 10 MS - 16 Channels
Minimum Detectable Pulse Width 4 ns
Channel-to-Channel Skew ±(1 digital sample)
User defined threshold range ±10V in 20 mV steps
 

Triggering System

Modes Normal, Auto, Single, Stop
Sources Ch 1 - Ch 4, EXT, EXT/5, AC Line
Coupling Mode AC, DC, LF Rej, HF Rej,
Pre-trigger Delay 0 - 100% Full Scale
Post-trigger Delay 0 - 10,000 Divisions
Hold-off by Time or Events 10 ns up to 20s
Internal Trigger Range ±4.1 Divisions
Trigger Sensitivity 0.8 division: DC - 10 MHz
1.5 division: 10 MHz - 200 MHz
External Trigger Sensitivity Ext: 200 mV from DC to 10 MHz
300 mV from 10 MHz to 200 MHz
Ext/5: 1 V from DC to 10 MHz
1.5 V from 10 MHz to 200 MHz
External Trigger Input Range Ext: ±0.61 V, EXT/5: ±3.05 V
 

Trigger Types

Standard Triggers Edge, Width, Logic (Pattern), TV (NTSC, PAL, SECAM, HDTV), Runt, Slew Rate, Interval, Dropout, Qualified; External and Ext/5 support edge trigger only
Optional Serial Data Triggers I2C, SPI, UART/RS-232
 

Internal Storage

Waveform Storage 2 memory waveforms plus internal microSD
Setup Storage 6 setups
 

Math

Number of Math Traces 2
Standard Math Functions Add, Subtract, Multiply, Divide, FFT, Absolute Value, Averaging (summed and continuous), Derivative, Envelope, Floor, Integral, Invert, Reciprocal, Rescale, Roof, SinX/x, Square, Square Root, Trend, Zoom
 

Measurements

Number of Measurements Displayed 6
Measurement Parameters Ampltidue, Area, Base, Delay, Duty Cycle, Fall Time (90% - 10%), Fall Time (80% - 20%), Frequency, Maximum, Mean, Minimum, Overshoot+, Overshoot-, Period, Peak-Peak, Period, Phase, Rise Time (10% - 90%), Rise Time (20% - 80%), RMS, Skew, Standard Deviation, Top, Width+, Width-
 

Color Waveform Display

Type Color Touch Screen 10.1" TFT-LCD
Resolution 1024 x 600
Grid Styles YT, XY
 

Interface

GPIB Port (optional) 1 (optional)
USB (Device) 1
Ethernet Port 1
USB (Host) 4
Serial Port 0
 

Probes

Probes Qty. (4) ÷10 Passive Probes
Scale Factors Automatic/Manual: ÷1, ÷10, ÷20, ÷100, ÷200, ÷1000, ÷10000
Variable: (÷1x10-6 - ÷10000)
Calibration Output 1 kHz square wave, 3.0 Vp-p,
output to probe hook
 

Power Requirements

Voltage 100 - 240 VAC, 50 Hz - 60 Hz ±5%
100 - 120 VAC, 400 Hz ±5%
Max. Power Consumption 330 VA
 

Environmental and Safety

Temperature (Operating) 0 °C to 50 °C
Temperature (Non-Operating) -30 °C to 70 °C
Humidity (Operating) 90% RH, 30 °C
50% RH, 50 °C
Humidity (Non-Operating) 95% RH
Altitude (Operating) 3,048 m max at <=25C
Altitude (Non-Operating) 12,192 m
 

Physical Dimensions

Dimensions (HWD) 350 mm x 1450 mm x 220 mm
(8.66" x 13.78" x 5.71")
Weight 4.81 kg. (10.6 lbs.)
 

Warranty and Service

Warranty and Service 3-year warranty; calibration recommended annually. Optional service programs include extended warranty and calibration services.
 
WaveSurfer 3024 スペック

Vertical System

Rise time 1.75 ns
Bandwidth 200 MHz
Input Channels 4
Bandwidth Limiters 20 MHz
Input Impedance 1 MΩ ± 2.0% || 16 pF, 50 Ω ± 2.0%
Input Coupling AC, DC, GND
Maximum Input Voltage 1 MΩ: 400 V max (DC + Peak AC ≦ 10 KHz), 50 Ω: 5 VRMS
Channel-Channel Isolation 40 dB from DC - 100 MHz
33 dB > 100 MHz
Vertical Resolution 8 bits
Sensitivity 1 MΩ: 1 mV/div - 10 V/div
50 Ω: 1 mV/div - 1 V/div
DC Gain Accuracy ±(1.5%) Full Scale, offset at 0 V > 5mV; ±(2.5%) < 5mV
Offset Range 50Ω
±2V: 1mV/div-19.8mV/div
±5V: 20mV/div-100mV/div
±20V: 102mV/div-198mV/div
±50V: 200mV/div-1V/div

1MΩ
±2V: 1mV/div-19.8mV/div
±5V: 20mV/div-100mV/div
±20V: 102mV/div-198mV/div
±50V: 200mV/div-1V/div
±200V: 1.02V/div-1.98V/div
±400V: 2V/div-10V/div
 

Horizontal System

Time/Division Range 2 ns/div - 50 s/div
Clock Accuracy 10 ppm > 1 ms interval
Trigger and Interpolator Jitter 17.5 ps (rms)
 

Acquisition System

Single-Shot Sample Rate/Ch 4 GS/s on 2 Ch
2 GS/s on 4 Ch
Equivalent Sample Rate 50 GS/s
Memory 10 Mpts/Ch
 

Acquisition Modes

Sequence Mode Up to 1,000 segments
 

Digital - Vertical and Acquisition

Input Channels 16
Threshold Groupings Pod 2: D15 - D8, Pod 1: D7 - D0
Threshold Selections TTL (+1.4V), 5V CMOS (+2.5V), ECL (-1.3V), or User Defined
Maximum Input Voltage ±30V Peak
Threshold Accuracy ±(3% of threshold setting + 100mV)
Input Dynamic Range ±20V
Minimum Input Voltage Swing 500mVpp
Input Impedance (Flying Leads) 100 kΩ || 5 pF
Maximum Input Frequency 125 MHz
Sample Rate 500 MS/s
Record Length 10 MS - 16 Channels
Minimum Detectable Pulse Width 4 ns
Channel-to-Channel Skew ±(1 digital sample)
User defined threshold range ±10V in 20 mV steps
 

Triggering System

Modes Normal, Auto, Single, Stop
Sources Ch 1 - Ch 4, EXT, EXT/5, AC Line
Coupling Mode AC, DC, LF Rej, HF Rej,
Pre-trigger Delay 0 - 100% Full Scale
Post-trigger Delay 0 - 10,000 Divisions
Hold-off by Time or Events 10 ns up to 20s
Internal Trigger Range ±4.1 Divisions
Trigger Sensitivity 0.8 division: DC - 10 MHz
1.5 division: 10 MHz - 200 MHz
External Trigger Sensitivity Ext: 200 mV from DC to 10 MHz
300 mV from 10 MHz to 200 MHz
Ext/5: 1 V from DC to 10 MHz
1.5 V from 10 MHz to 200 MHz
External Trigger Input Range Ext: ±0.61 V, EXT/5: ±3.05 V
 

Trigger Types

Standard Triggers Edge, Width, Logic (Pattern), TV (NTSC, PAL, SECAM, HDTV), Runt, Slew Rate, Interval, Dropout, Qualified; External and Ext/5 support edge trigger only
Optional Serial Data Triggers I2C, SPI, UART/RS-232
 

Internal Storage

Waveform Storage 2 memory waveforms plus internal microSD
Setup Storage 6 setups
 

Math

Number of Math Traces 2
Standard Math Functions Add, Subtract, Multiply, Divide, FFT, Absolute Value, Averaging (summed and continuous), Derivative, Envelope, Floor, Integral, Invert, Reciprocal, Rescale, Roof, SinX/x, Square, Square Root, Trend, Zoom
 

Measurements

Number of Measurements Displayed 6
Measurement Parameters Ampltidue, Area, Base, Delay, Duty Cycle, Fall Time (90% - 10%), Fall Time (80% - 20%), Frequency, Maximum, Mean, Minimum, Overshoot+, Overshoot-, Period, Peak-Peak, Period, Phase, Rise Time (10% - 90%), Rise Time (20% - 80%), RMS, Skew, Standard Deviation, Top, Width+, Width-
 

Color Waveform Display

Type Color Touch Screen 10.1" TFT-LCD
Resolution 1024 x 600
Grid Styles YT, XY
 

Interface

GPIB Port (optional) 1 (optional)
USB (Device) 1
Ethernet Port 1
USB (Host) 4
Serial Port 0
 

Probes

Probes Qty. (4) ÷10 Passive Probes
Scale Factors Automatic/Manual: ÷1, ÷10, ÷20, ÷100, ÷200, ÷1000, ÷10000
Variable: (÷1x10-6 - ÷10000)
Calibration Output 1 kHz square wave, 3.0 Vp-p,
output to probe hook
 

Power Requirements

Voltage 100 - 240 VAC, 50 Hz - 60 Hz ±5%
100 - 120 VAC, 400 Hz ±5%
Max. Power Consumption 330 VA
 

Environmental and Safety

Temperature (Operating) 0 °C to 50 °C
Temperature (Non-Operating) -30 °C to 70 °C
Humidity (Operating) 90% RH, 30 °C
50% RH, 50 °C
Humidity (Non-Operating) 95% RH
Altitude (Operating) 3,048 m max at <=25C
Altitude (Non-Operating) 12,192 m
 

Physical Dimensions

Dimensions (HWD) 350 mm x 1450 mm x 220 mm
(8.66" x 13.78" x 5.71")
Weight 4.81 kg. (10.6 lbs.)
 

Warranty and Service

Warranty and Service 3-year warranty; calibration recommended annually. Optional service programs include extended warranty and calibration services.
 
WaveSurfer 3034 スペック

Vertical System

Rise time 1 ns
Bandwidth 350 MHz
Input Channels 4
Bandwidth Limiters 20 MHz, 200 MHz
Input Impedance 1 MΩ ± 2.0% || 16 pF, 50 Ω ± 2.0%
Input Coupling AC, DC, GND
Maximum Input Voltage 1 MΩ: 400 V max (DC + Peak AC ≦ 10 KHz), 50 Ω: 5 VRMS
Channel-Channel Isolation 40 dB from DC - 100 MHz
33 dB > 100 MHz
Vertical Resolution 8 bits
Sensitivity 1 MΩ: 1 mV/div - 10 V/div
50 Ω: 1 mV/div - 1 V/div
DC Gain Accuracy ±(1.5%) Full Scale, offset at 0 V > 5mV; ±(2.5%) < 5mV
Offset Range 50Ω
±2V: 1mV/div-19.8mV/div
±5V: 20mV/div-100mV/div
±20V: 102mV/div-198mV/div
±50V: 200mV/div-1V/div

1MΩ
±2V: 1mV/div-19.8mV/div
±5V: 20mV/div-100mV/div
±20V: 102mV/div-198mV/div
±50V: 200mV/div-1V/div
±200V: 1.02V/div-1.98V/div
±400V: 2V/div-10V/div
 

Horizontal System

Time/Division Range 2 ns/div - 50 s/div
Clock Accuracy 10 ppm > 1 ms interval
Trigger and Interpolator Jitter 17.5 ps (rms)
 

Acquisition System

Single-Shot Sample Rate/Ch 4 GS/s on 2 Ch
2 GS/s on 4 Ch
Equivalent Sample Rate 50 GS/s
Memory 10 Mpts/Ch
 

Acquisition Modes

Sequence Mode Up to 1,000 segments
 

Digital - Vertical and Acquisition

Input Channels 16
Threshold Groupings Pod 2: D15 - D8, Pod 1: D7 - D0
Threshold Selections TTL (+1.4V), 5V CMOS (+2.5V), ECL (-1.3V), or User Defined
Maximum Input Voltage ±30V Peak
Threshold Accuracy ±(3% of threshold setting + 100mV)
Input Dynamic Range ±20V
Minimum Input Voltage Swing 500mVpp
Input Impedance (Flying Leads) 100 kΩ || 5 pF
Maximum Input Frequency 125 MHz
Sample Rate 500 MS/s
Record Length 10 MS - 16 Channels
Minimum Detectable Pulse Width 4 ns
Channel-to-Channel Skew ±(1 digital sample)
User defined threshold range ±10V in 20 mV steps
 

Triggering System

Modes Normal, Auto, Single, Stop
Sources Ch 1 - Ch 4, EXT, EXT/5, AC Line
Coupling Mode AC, DC, LF Rej, HF Rej,
Pre-trigger Delay 0 - 100% Full Scale
Post-trigger Delay 0 - 10,000 Divisions
Hold-off by Time or Events 10 ns up to 20s
Internal Trigger Range ±4.1 Divisions
Trigger Sensitivity 0.8 division: DC - 10 MHz
1.5 division: 10 MHz - 200 MHz
External Trigger Sensitivity Ext: 200 mV from DC to 10 MHz
300 mV from 10 MHz to 350 MHz
Ext/5: 1 V from DC to 10 MHz
1.5 V from 10 MHz to 350 MHz
External Trigger Input Range Ext: ±0.61 V, EXT/5: ±3.05 V
 

Trigger Types

Standard Triggers Edge, Width, Logic (Pattern), TV (NTSC, PAL, SECAM, HDTV), Runt, Slew Rate, Interval, Dropout, Qualified; External and Ext/5 support edge trigger only
Optional Serial Data Triggers I2C, SPI, UART/RS-232
 

Internal Storage

Waveform Storage 2 memory waveforms plus internal microSD
Setup Storage 6 setups
 

Math

Number of Math Traces 2
Standard Math Functions Add, Subtract, Multiply, Divide, FFT, Absolute Value, Averaging (summed and continuous), Derivative, Envelope, Floor, Integral, Invert, Reciprocal, Rescale, Roof, SinX/x, Square, Square Root, Trend, Zoom
 

Measurements

Number of Measurements Displayed 6
Measurement Parameters Ampltidue, Area, Base, Delay, Duty Cycle, Fall Time (90% - 10%), Fall Time (80% - 20%), Frequency, Maximum, Mean, Minimum, Overshoot+, Overshoot-, Period, Peak-Peak, Period, Phase, Rise Time (10% - 90%), Rise Time (20% - 80%), RMS, Skew, Standard Deviation, Top, Width+, Width-
 

Color Waveform Display

Type Color Touch Screen 10.1" TFT-LCD
Resolution 1024 x 600
Grid Styles YT, XY
 

Interface

GPIB Port (optional) 1 (optional)
USB (Device) 1
Ethernet Port 1
USB (Host) 4
Serial Port 0
 

Probes

Probes Qty. (4) ÷10 Passive Probes
Scale Factors Automatic/Manual: ÷1, ÷10, ÷20, ÷100, ÷200, ÷1000, ÷10000
Variable: (÷1x10-6 - ÷10000)
Calibration Output 1 kHz square wave, 3.0 Vp-p,
output to probe hook
 

Power Requirements

Voltage 100 - 240 VAC, 50 Hz - 60 Hz ±5%
100 - 120 VAC, 400 Hz ±5%
Max. Power Consumption 330 VA
 

Environmental and Safety

Temperature (Operating) 0 °C to 50 °C
Temperature (Non-Operating) -30 °C to 70 °C
Humidity (Operating) 90% RH, 30 °C
50% RH, 50 °C
Humidity (Non-Operating) 95% RH
Altitude (Operating) 3,048 m max at <=25C
Altitude (Non-Operating) 12,192 m
 

Physical Dimensions

Dimensions (HWD) 350 mm x 1450 mm x 220 mm
(8.66" x 13.78" x 5.71")
Weight 4.81 kg. (10.6 lbs.)
 

Warranty and Service

Warranty and Service 3-year warranty; calibration recommended annually. Optional service programs include extended warranty and calibration services.
 
WaveSurfer 3054 スペック

Vertical System

Rise time 800 ps
Bandwidth 500 MHz
Input Channels 4
Bandwidth Limiters 20 MHz, 200 MHz
Input Impedance 1 MΩ ± 2.0% || 16 pF, 50 Ω ± 2.0%
Input Coupling AC, DC, GND
Maximum Input Voltage 1 MΩ: 400 V max (DC + Peak AC ≦ 10 KHz), 50 Ω: 5 VRMS
Channel-Channel Isolation 40 dB from DC - 100 MHz
33 dB > 100 MHz
Vertical Resolution 8 bits
Sensitivity 1 MΩ: 1 mV/div - 10 V/div
50 Ω: 1 mV/div - 1 V/div
DC Gain Accuracy ±(1.5%) Full Scale, offset at 0 V > 5mV; ±(2.5%) < 5mV
Offset Range 50Ω
±2V: 1mV/div-19.8mV/div
±5V: 20mV/div-100mV/div
±20V: 102mV/div-198mV/div
±50V: 200mV/div-1V/div

1MΩ
±2V: 1mV/div-19.8mV/div
±5V: 20mV/div-100mV/div
±20V: 102mV/div-198mV/div
±50V: 200mV/div-1V/div
±200V: 1.02V/div-1.98V/div
±400V: 2V/div-10V/div
 

Horizontal System

Time/Division Range 1 ns/div - 50 s/div
Clock Accuracy 10 ppm > 1 ms interval
Trigger and Interpolator Jitter 17.5 ps (rms)
 

Acquisition System

Single-Shot Sample Rate/Ch 4 GS/s on 2 Ch
2 GS/s on 4 Ch
Equivalent Sample Rate 50 GS/s
Memory 10 Mpts/Ch
 

Acquisition Modes

Sequence Mode Up to 1,000 segments
 

Digital - Vertical and Acquisition

Input Channels 16
Threshold Groupings Pod 2: D15 - D8, Pod 1: D7 - D0
Threshold Selections TTL (+1.4V), 5V CMOS (+2.5V), ECL (-1.3V), or User Defined
Maximum Input Voltage ±30V Peak
Threshold Accuracy ±(3% of threshold setting + 100mV)
Input Dynamic Range ±20V
Minimum Input Voltage Swing 500mVpp
Input Impedance (Flying Leads) 100 kΩ || 5 pF
Maximum Input Frequency 125 MHz
Sample Rate 500 MS/s
Record Length 10 MS - 16 Channels
Minimum Detectable Pulse Width 4 ns
Channel-to-Channel Skew ±(1 digital sample)
User defined threshold range ±10V in 20 mV steps
 

Triggering System

Modes Normal, Auto, Single, Stop
Sources Ch 1 - Ch 4, EXT, EXT/5, AC Line
Coupling Mode AC, DC, LF Rej, HF Rej,
Pre-trigger Delay 0 - 100% Full Scale
Post-trigger Delay 0 - 10,000 Divisions
Hold-off by Time or Events 10 ns up to 20s
Internal Trigger Range ±4.1 Divisions
Trigger Sensitivity 0.8 division: DC - 10 MHz
1.5 division: 10 MHz - 200 MHz
External Trigger Sensitivity Ext: 200 mV from DC to 10 MHz
300 mV from 10 MHz to 500 MHz
Ext/5: 1 V from DC to 10 MHz
1.5 V from 10 MHz to 500 MHz
External Trigger Input Range Ext: ±0.61 V, EXT/5: ±3.05 V
 

Trigger Types

Standard Triggers Edge, Width, Logic (Pattern), TV (NTSC, PAL, SECAM, HDTV), Runt, Slew Rate, Interval, Dropout, Qualified; External and Ext/5 support edge trigger only
Optional Serial Data Triggers I2C, SPI, UART/RS-232
 

Internal Storage

Waveform Storage 2 memory waveforms plus internal microSD
Setup Storage 6 setups
 

Math

Number of Math Traces 2
Standard Math Functions Add, Subtract, Multiply, Divide, FFT, Absolute Value, Averaging (summed and continuous), Derivative, Envelope, Floor, Integral, Invert, Reciprocal, Rescale, Roof, SinX/x, Square, Square Root, Trend, Zoom
 

Measurements

Number of Measurements Displayed 6
Measurement Parameters Ampltidue, Area, Base, Delay, Duty Cycle, Fall Time (90% - 10%), Fall Time (80% - 20%), Frequency, Maximum, Mean, Minimum, Overshoot+, Overshoot-, Period, Peak-Peak, Period, Phase, Rise Time (10% - 90%), Rise Time (20% - 80%), RMS, Skew, Standard Deviation, Top, Width+, Width-
 

Color Waveform Display

Type Color Touch Screen 10.1" TFT-LCD
Resolution 1024 x 600
Grid Styles YT, XY
 

Interface

GPIB Port (optional) 1 (optional)
USB (Device) 1
Ethernet Port 1
USB (Host) 4
Serial Port 0
 

Probes

Probes Qty. (4) ÷10 Passive Probes
Scale Factors Automatic/Manual: ÷1, ÷10, ÷20, ÷100, ÷200, ÷1000, ÷10000
Variable: (÷1x10-6 - ÷10000)
Calibration Output 1 kHz square wave, 3.0 Vp-p,
output to probe hook
 

Power Requirements

Voltage 100 - 240 VAC, 50 Hz - 60 Hz ±5%
100 - 120 VAC, 400 Hz ±5%
Max. Power Consumption 330 VA
 

Environmental and Safety

Temperature (Operating) 0 °C to 50 °C
Temperature (Non-Operating) -30 °C to 70 °C
Humidity (Operating) 90% RH, 30 °C
50% RH, 50 °C
Humidity (Non-Operating) 95% RH
Altitude (Operating) 3,048 m max at <=25C
Altitude (Non-Operating) 12,192 m
 

Physical Dimensions

Dimensions (HWD) 350 mm x 1450 mm x 220 mm
(8.66" x 13.78" x 5.71")
Weight 4.81 kg. (10.6 lbs.)
 

Warranty and Service

Warranty and Service 3-year warranty; calibration recommended annually. Optional service programs include extended warranty and calibration services.
 
WaveSurfer 3074 スペック

Vertical System

Rise time 550 ps
Bandwidth 750 MHz
Input Channels 4
Bandwidth Limiters 20 MHz, 200 MHz
Input Impedance 1 MΩ ± 2.0% || 16 pF, 50 Ω ± 2.0%
Input Coupling AC, DC, GND
Maximum Input Voltage 1 MΩ: 400 V max (DC + Peak AC ≤ 10 KHz), 50 Ω: 5 VRMS
Channel-Channel Isolation 40 dB from DC - 100 MHz
33 dB > 100 MHz
Vertical Resolution 8 bits
Sensitivity 1 MΩ: 1 mV/div - 10 V/div
50 Ω: 1 mV/div - 1 V/div
DC Gain Accuracy ±(1.5%) Full Scale, offset at 0 V > 5mV; ±(2.5%) < 5mV
Offset Range 50Ω
±2V: 1mV/div-19.8mV/div
±5V: 20mV/div-100mV/div
±20V: 102mV/div-198mV/div
±50V: 200mV/div-1V/div

1MΩ
±2V: 1mV/div-19.8mV/div
±5V: 20mV/div-100mV/div
±20V: 102mV/div-198mV/div
±50V: 200mV/div-1V/div
±200V: 1.02V/div-1.98V/div
±400V: 2V/div-10V/div
 

Horizontal System

Time/Division Range 1 ns/div - 50 s/div
Clock Accuracy 10 ppm > 1 ms interval
Trigger and Interpolator Jitter 17.5 ps (rms)
 

Acquisition System

Single-Shot Sample Rate/Ch 4 GS/s on 2 Ch
2 GS/s on 4 Ch
Equivalent Sample Rate 50 GS/s
Memory 10 Mpts/Ch
 

Acquisition Modes

Sequence Mode Up to 1,000 segments
 

Digital - Vertical and Acquisition

Input Channels 16
Threshold Groupings Pod 2: D15 - D8, Pod 1: D7 - D0
Threshold Selections TTL (+1.4V), 5V CMOS (+2.5V), ECL (-1.3V), or User Defined
Maximum Input Voltage ±30V Peak
Threshold Accuracy ±(3% of threshold setting + 100mV)
Input Dynamic Range ±20V
Minimum Input Voltage Swing 500mVpp
Input Impedance (Flying Leads) 100 kΩ || 5 pF
Maximum Input Frequency 125 MHz
Sample Rate 500 MS/s
Record Length 10 MS - 16 Channels
Minimum Detectable Pulse Width 4 ns
Channel-to-Channel Skew ±(1 digital sample)
User defined threshold range ±10V in 20 mV steps
 

Triggering System

Modes Normal, Auto, Single, Stop
Sources Ch 1 - Ch 4, EXT, EXT/5, AC Line
Coupling Mode AC, DC, LF Rej, HF Rej,
Pre-trigger Delay 0 - 100% Full Scale
Post-trigger Delay 0 - 10,000 Divisions
Hold-off by Time or Events 10 ns up to 20s
Internal Trigger Range ±4.1 Divisions
Trigger Sensitivity 0.8 division: DC - 10 MHz
1.5 division: 10 MHz - 200 MHz
External Trigger Sensitivity Ext: 200 mV from DC to 10 MHz
300 mV from 10 MHz to 500 MHz
Ext/5: 1 V from DC to 10 MHz
1.5 V from 10 MHz to 500 MHz
External Trigger Input Range Ext: ±0.61 V, EXT/5: ±3.05 V
 

Trigger Types

Standard Triggers Edge, Width, Logic (Pattern), TV (NTSC, PAL, SECAM, HDTV), Runt, Slew Rate, Interval, Dropout, Qualified; External and Ext/5 support edge trigger only
Optional Serial Data Triggers I2C, SPI, UART/RS-232
 

Internal Storage

Waveform Storage 2 memory waveforms plus internal microSD
Setup Storage 6 setups
 

Math

Number of Math Traces 2
Standard Math Functions Add, Subtract, Multiply, Divide, FFT, Absolute Value, Averaging (summed and continuous), Derivative, Envelope, Floor, Integral, Invert, Reciprocal, Rescale, Roof, SinX/x, Square, Square Root, Trend, Zoom
 

Measurements

Number of Measurements Displayed 6
Measurement Parameters Ampltidue, Area, Base, Delay, Duty Cycle, Fall Time (90% - 10%), Fall Time (80% - 20%), Frequency, Maximum, Mean, Minimum, Overshoot+, Overshoot-, Period, Peak-Peak, Period, Phase, Rise Time (10% - 90%), Rise Time (20% - 80%), RMS, Skew, Standard Deviation, Top, Width+, Width-
 

Color Waveform Display

Type Color Touch Screen 10.1" TFT-LCD
Resolution 1024 x 600
Grid Styles YT, XY
 

Interface

GPIB Port 1 (optional)
USB (Device) 1
Ethernet Port 1
USB (Host) 4
Serial Port 0
 

Probes

Probes Qty. (4) ÷10 Passive Probes
Scale Factors Automatic/Manual: ÷1, ÷10, ÷20, ÷100, ÷200, ÷1000, ÷10000
Variable: (÷1x10-6 - ÷10000)
Calibration Output 1 kHz square wave, 3.0 Vp-p,
output to probe hook
 

Power Requirements

Voltage 100 - 240 VAC, 50 Hz - 60 Hz ±5%
100 - 120 VAC, 400 Hz ±5%
Max. Power Consumption 330 VA
 

Environmental and Safety

Temperature (Operating) 0 °C to 50 °C
Temperature (Non-Operating) -30 °C to 70 °C
Humidity (Operating) 90% RH, 30 °C
50% RH, 50 °C
Humidity (Non-Operating) 95% RH
Altitude (Operating) 3,048 m max at <=25C
Altitude (Non-Operating) 12,192 m
 

Physical Dimensions

Dimensions (HWD) 350 mm x 1450 mm x 220 mm
(8.66" x 13.78" x 5.71")
Weight 4.81 kg. (10.6 lbs.)
 

Warranty and Service

Warranty and Service 3-year warranty; calibration recommended annually. Optional service programs include extended warranty and calibration services.
 

ページトップへ  

デモビデオ(計測方法などを解説)

WaveSurfer3000シリーズの基本的な活用方法を、動画で解説しています。

WaveSurfer 3000 (MAUI) デモビデオ一覧

主な特徴

    • 大画面10.1インチ・タッチスクリーン
    • 使いやすさを追求 ─ ユーザー・インタフェースMAUIを採用
    • 低価格で多機能
    • 様々なプローブに対応
    • 帯域のアップグレード可能

仕様

    • 帯域 :100MHz*、200MHz、350MHz、500MHz、750MHz**、1GHz*
    • メモリ長: 10Mポイント/ch (インターリーブ時:20Mポイント*)
    • 最大サンプリング速度 : 4GS/s

    * zモデルのみ、** zなしモデルのみ


使いやすさを追求 ─MAUIユーザ・インターフェース

MAUI(マウイ)は、テレダイン・レクロイのタッチ・スクリーン用に開発されたオシロスコープ・ユーザ・インターフェースです。長年改良を重ねた評価の高いユーザ・インタフェースをWaveSurfer 3000zはそのまま採用しているので、汎用機からハイエンド機まで全て同じ感覚で使用できます。


テレダイン・レクロイだけの便利な機能
測定をまるごとアーカイブ ─LabNotebook

標準装備のLabNotebook(ラブノートブック)を使用することにより、測定/解析/デバッグの各場面で効率よく作業が行えます。

  • 波形データ(Binary)、画像ファイル、設定ファイルをまとめて保存
  • 過去の設定、波形データをまるごと再現(フラッシュバック機能)
  • 各アーカイブ・ファイルにコメントを加えることが可能
  • パソコンにそのまま転送(無償のユーティリティWaveStudio使用)

アップグレードも思いのまま

WaveSurfer 3000/3000zシリーズは、帯域のアップグレードや各種オプションを後から必要な時に追加できるため、 初期費用を抑えることできます。帯域やプローブの他に、ファンクション・ジェネレータ、シリアル・トリガ/デコード・オプション、ミックスド・シグナル・オプションなど様々なオプションが用意されています。


1台で5役
  1. オシロスコープ
  2. デジタル・ボルトメータ
  3. ロジック・アナライザ*
  4. プロトコル・アナライザ*
  5. 任意波形/ファンクション・ジェネレータ*

*オプション

ページトップに戻る
 

その他の便利な機能

WaveSurfer 3000/3000zシリーズには、標準搭載の便利な機能の他に、必要に応じて購入後に追加可能なオプションが用意されているため、最適な使用条件にカスタマイズできます。

1. シーケンスモード (標準搭載)

短短時間に連続する多数の高速パルスや、長時間に間欠的に発生する信号を効率的に捕捉します。

2. ヒストリ・モード(標準搭載)

ドライブレコーダのように、取り込みを停止させる前に捕捉された瞬間的な異常イベントを、過去にさかのぼって分離し、問題の原因をすばやく発見することができます。

ページトップに戻る

3. 波形検索機能─WaveScan (標準搭載)

ラントやグリッチなどの異常波形や立ち上がり時間などの条件で検索します。また、波形更新中に目的波形を見つけると、更新を停止することもできます。

4. 波形演算とパラメータ計測(標準搭載)

波形の一部分を測定対象にするゲートや測定データを時系列波形に変換するトレンド機能、分布状況を表すヒストグ ラムなど多角的な解析を可能にします。また1MポイントのFFTは幅広い周波数スパンでのスペクトル解析を可能に します。

5. 開発を支える様々なプローブに対応(オプション)

上位機種と共通のプローブ・インタフェースにより、多くのプローブがサポートされ、高電圧、高周波、電流、差動信号を非常にフレキシブルに測定できます。

ページトップに戻る

6. シリアル・バス・トリガとデコード(オプション)

アドレスやデータでの条件トリガや、プロトコル検索機能で目的のメッセージを探し出すことができます。波形上に色分けされてデコード表示されるため、プロトコル構造を一目で理解することができます。I2C、SPI、UART、RS232、LIN、CAN、CAN FD、FlexRay、AudioBusをサポートしています。

7. パワー・デバイス解析(オプション)

上位機種と同様に、パワーデバイスの動作特性をすばやく測定・解析することができます。その他制御ループ解析や高調波解析等、スイッチング・デバイス/電源の開発をトータルにサポートします。

8. 信号発生(オプション)

  • WaveSource 内蔵ファンクション・ジェネレータ
  • 25 MHz、125 MS/s、1チャンネルを内蔵可能
  • MAUIに組み込まれた専用メニュー

9. ロジック解析(オプション)

  • ミックスド・シグナル・オプション
  • 16ch、125MHz、500MS/s、10Mポイント/ch

クリックで詳細表示されます

ミックスド・シグナル・オプション

リモート・コントロール/ネットワーク・オプション

トリガ/デコード・パッケージ

ソフトウエア・オプション

その他

ページトップに戻る

クリックで詳細表示されます

プローブ・アダプタ

アクティブ・プローブ

電源レール・プローブ

電流プローブ

差動プローブ

高圧差動プローブ

光アイソレーション・プローブ

高圧プローブ

パッシブ・プローブ