DDR3
|
|
The Kibra 380 is the first standalone DDR3 bus analyzer designed specifically to overcome the cost and complexity of monolithic test approaches that rely on logic analyzer platforms. Fully self-contained, the Kibra 380 uses non-intrusive interposer probes to transparently monitor DDR3 transactions on a live system. With no calibration required, the Kibra 380 provides complete visibility to DDR3 command and timing intervals allowing developers to verify compliance with the JEDEC specification.
|
| |
|
The Kibra 380 is a stand-alone DDR3 protocol analyzer that provides comprehensive DDR3 bus and JEDEC timing analysis.
|
|
DDR3 & DDR4
|
|
Teledyne LeCroy's pioneering approach to serial data presentation has benefited developers of computer systems and peripherals for over 15 years. With its introduction of a new low-cost test platform for DDR3 & DDR4, Teledyne LeCroy now brings its high-speed probing and analysis expertise to developers of high performance memory systems.
|
| |
|
The Kibra 480 is a stand-alone protocol analyzer that provides comprehensive bus and JEDEC timing analysis for DDR3 and DDR4. Sitting in-line on a live system, the analyzer uses a proprietary probe implementation to allow loss-less capture of high speed DDR transactions while automatically identifying timing and protocol violations.
|
|
Ethernet
|
|
Ethernet, as the most common communication protocol on the planet, continues to spread into new markets and presents Ethernet engineers with new test challenges. Specifically, With the increasing adoption of lossless ethernet standards like FCoE; and increases in the line-rates of ethernet to 10 Gb/s and 40 Gb/s; previously available test tools are becoming ineffective or to expensive for Ethernet product developers. Teledyne LeCroy is addressing these needs by leveraging our extensive experience in high-speed serial data analysis tools currently used by many of the same companies devleloping products for SAN, LAN, and other high-speed protocol environments.
|
| |
|
The SierraNet M408 system provides 10/40Gbps Ethernet and 16G Fibre Channel data capture and protocol verification for developers & protocol test engineers in LAN, SAN, other Ethernet and Fibre Channel applications. Available with eight SFP+ FlexPortsTM for 10Gbps Ethernet and 16G Fibre Channel and two 40Gbps QSFP ports, the SierraNet offers world-class protocol analysis capabilities with an easy to use, customizable hardware & software interface, large capture buffers, and the most advanced triggering and filtering capabilities in the industry.
|
| |
| |
|
The SierraNet M168 system provides 10Gbps Ethernet and 16G Fibre Channel data capture and protocol verification for developers & protocol test engineers in LAN, SAN, other Ethernet and Fibre Channel applications. Available with eight SFP+ FlexPortsTM for 10Gbps Ethernet and 16G Fibre Channel, the SierraNet offers world-class protocol analysis capabilities with an easy to use, customizable hardware & software interface, large capture buffers, and the most advanced triggering and filtering capabilities in the industry.
|
|
Fibre Channel
|
|
Fibre Channel is a networking standard used primarily as the infrastructure for storage area networks (SAN) in enterprise data centers. Fibre Channel has 80%+ market share in the Storage Area Networking space and will see continued development and use for many years to come. 8GFC, the latest shipping version of Fibre Channel, and future Fibre Channel related standards will continue to serve applications where the need for higher network bandwidth continues to grow at exponential rates.
|
| |
|
Fast, Flexible, and AffordableSierraFC supports up to 8 Gb/s FC data capture and protocol analysis. SierraFC is cost-effective, easily integrated within a 19” rack, deployed as a bench top instrument, or carried into the field.
|
| |
| |
|
The SierraFC M164 system provides 16G Fibre Channel data capture and protocol verification for developers & protocol test engineers in storage networking and other Fibre Channel applications. Available with 4 recording channels, the SierraFC offers world-class protocol analysis capabilities with an easy to use, customizable hardware & software interface, large capture buffers, and standard support for Speed Negotiation and Forward Error Correction (FEC) enabled links.
|
|
IOTA Software Suite
|
|
The Teledyne LeCroy IOTA Software Suite is designed to work with Intel's next generation processors, bringing Teledyne LeCroy's world class protocol viewing and intuitive user interface to internal trace data from various sources as defined by Intel. The internal trace data is extracted from the system using the Intel provided pod and is fully decoded, time correlated and viewed using Teledyne LeCroy's IOTA Software Suite advanced visualization and analysis software.
|
| |
|
Teledyne LeCroy’s IOTA Software Suite is a Windows based software application that is used to access Intel’s embedded Dfx features which are intended to enable users with deep visibility into the silicon.
Used in combination with Teledyne LeCroy’s probe based protocol analyzers and Teledyne LeCroy’s CrossSyncTM capabilities, Teledyne LeCroy delivers time correlated views of activities that are observed within different domains of the system.
|
|
PCI Express
|
|
PCI Express (PCIe) has become the leading interconnect technology to succeed the Peripheral Connect Interface (PCI) architecture.The PCI Express(PCIe) architecture retains the PCI usage model and software interfaces for investment protection and smooth development migration. The technology is aimed at multiple market segments in the computing and communication industries, and supports chip-to-chip, board-to-board and adapter solutions. PCI Express 3.0 currently runs at 8GT/s or 8GBps per lane in each direction, providing a total bandwidth of 32GBps in a 16-lane configuration which is the largest size in use.
|
| |
|
Teledyne LeCroy now offers an integrated and automated validation testing system for PCI Express root complex and endpoint devices called PCI Express Script Automation Test Tool.
|
| |
| |
|
The Teledyne LeCroy Protocol Test Card (PTC) is a multimodal test board used for checking adherence to the protocol-oriented sections of the PCI Express 2.0 specification.
|
| |
| |
|
The PETracer product family includes a wide variety of Interposer systems, designed to reliably capture serial data traffic while minimizing perturbations in the serial data stream. Probes include interposers, which are designed to capture data traffic crossing the PCI Express card connector interface, and MidBus probes, which are designed to capture traffic flowing within a PCB.
|
| |
| |
|
Catalyst CatScan is a Windows-based PCI/PCI Express configuration space Read/Write utility that allows the user to scan, decode, display and write to the system configuration registers. The user can decode and change each bit value of any register on the fly without flipping any pages on the PCI Specification. It also displays the complete component information on the target system, and currently supports PCI Express Specs 1.0A, 1.0A+ECN, and 1.1.
|
| |
| |
|
The Summit T3-16 Protocol Analyzer captures, decodes and displays PCIe 3.0 protocol traffic.data rates for x1, x2, x4, x8, x16 lane widths
|
| |
| |
|
The Summit Z3-16 PCI Express Protocol Exerciser supporting 2.5GT/s, 5GT/s and 8GT/s data rates for x1, x2, x4, x8, x16 lane widths
|
| |
| |
|
The Summit T3-8 Protocol Analyzer captures, decodes and displays PCIe 3.0 protocol traffic.data rates for x1, x2, x4, x8 lane widths
|
| |
| |
|
The Summit T28 Protocol Analyzer captures, decodes and displays PCIe 2.5GT/s and 5GT/s data rates for x1, x2, x4, x8 lane widths
|
| |
| |
|
Teledyne LeCroy has been an industry leader in storage protocol analysis. The storage SSD/Drive technology is now moving towards a PCI Express host based interface. Teledyne LeCroy supports the following:
-NVM Express
-SCSI Express
-SATA Express
|
| |
| |
|
The BitTracer Logic Display is a software option that runs on the Teledyne LeCroy Summit PCI Express Protocol Analyzers. BitTracer offers developers a physical layer view of PCI Express traffic, similar to what might be displayed on a logic analyzer, but provides this capability on a protocol analyzer. This means that developers can view bit stream traffic before it is decoded to high-level packets, to better understand where signal integrity issues may be causing data corruption.
|
| |
| |
|
The Teledyne LeCroy Summit T24 PCI Express analyzer is for customers developing PCIe 1.0 or 2.0 x4 lane width server, workstation, desktop, graphics, storage, and network card applications.
|
|
SAS (Serial Attached SCSI)
|
|
Serial Attached SCSI (SAS) is a data transfer technology designed to move data to and from storage devices such as disk drives, host bus adapters (HBA), and expanders. SAS is a serialized enhancement and replacement to parallel SCSI. Since SAS ratification in 2004, and it’s move to 6Gbps in 2008, Teledyne LeCroy has continued to support and innovate with it’s industry leading protocol analysis and traffic generation capabilities.
|
| |
|
The Sierra Protocol Test System is the 6th generation in the leading line of SAS/SATA protocol test solutions from the leading manufacturer of protocol test systems. Designed for the current evolution of both SAS (SAS 2.0) and SATA (SATA 3.0), the new Sierra product family sets new standards for performance while incorporating a complete range of features in a single, economical system.
|
| |
| |
|
The Sierra Protocol Test System is the 6th generation in the leading line of SAS/SATA protocol test solutions from the leading manufacturer of protocol test systems. Designed for the current evolution of both SAS (SAS 2.0) and SATA (SATA 3.0), the new Sierra product family sets new standards for performance while incorporating a complete range of features in a single, economical system.
|
| |
| |
|
SAS and SATA Protocol Test System
|
| |
| |
|
The Sierra M124 Protocol Test System is the 7th generation in the leading line of SAS/SATA protocol test solutions from the leading manufacturer of protocol test systems. Designed for the current evolution of both SAS (SAS 3.0) and SATA (SATA 3.0), the new Sierra M124 sets new standards for performance while incorporating a complete range of features in a single, economical system.
|
|
SATA (Serial ATA)
|
|
Serial ATA (SATA) is a data transfer technology designed to move data to and from storage devices such as disk drives, ATAPI drives, host bus adapters (HBA), and port multipliers. SATA is a serialized enhancement and replacement to parallel IDE. Since SATA ratification in 2003 and its move to 6Gbps in 2008, Teledyne LeCroy has continued to support and innovate with its industry leading protocol analysis and traffic generation capabilities.
|
| |
|
The Sierra Protocol Test System is the 6th generation in the leading line of SATA protocol test solutions from the leading manufacturer of protocol test systems. Designed for the current evolution of SATA (SATA 3.0), the new Sierra product family sets new standards for performance while incorporating a complete range of features in a single, economical system.
|
| |
| |
|
The Sierra Protocol Test System is the 6th generation in the leading line of SATA protocol test solutions from the leading manufacturer of protocol test systems. Designed for the current evolution of SATA (SATA 3.0), the new Sierra product family sets new standards for performance while incorporating a complete range of features in a single, economical system.
|
| |
| |
|
SATA Protocol Test System
|
|
SimPASS Software
|
|
SimPASS allows RTL simulation vector files (that describe PCI Express data traffic in the pre-silicon phase) to be displayed and analyzed in the same way as hardware-derived trace files in the post-silicon phase. By extracting features that show potential flaws in data and transaction packets from the data stream, SimPASS enables developers to more completely test and debug the logic design before committing the design to silicon, a major advance in eliminating design flaws that can cause expensive and time-consuming redesign.
|
| |
|
SimPASS allows RTL simulation vector files (that describe PCI Express data traffic in the pre-silicon phase) to be displayed and analyzed in the same way as hardware-derived trace files in the post-silicon phase. By extracting features that show potential flaws in data and transaction packets from the data stream, SimPASS enables developers to more completely test and debug the logic design before committing the design to silicon, a major advance in eliminating design flaws that can cause expensive and time-consuming redesign.
|
|
USB
|
|
Since the introduction of USB over 10 years ago, Teledyne LeCroy has been a leading provider of verification tools used to debug and test USB semiconductors, devices, and software. Offering both analyzer and exerciser capabilities, the Teledyne LeCroy systems help developers avoid costly interoperability problems by quickly identifying issues and verifying compliance with the specification.
|
| |
|
The Voyager M3i is Teledyne LeCroy’s 6th generation USB protocol verification platform designed for the next evolution of universal serial bus known as SuperSpeed USB. Leveraging Teledyne LeCroy’s extensive expertise in high-speed serial data analysis, the Voyager provides 100% accurate protocol capture of both USB 2.0 and 3.0 at data rates up to 5 Gb/s.
|
| |
| |
|
Teledyne LeCroy’s Advisor T3 is an ultra portable SuperSpeed USB analyzer that delivers market leading accuracy at an extraordinary price. Designed to put precision USB protocol test tools in the hands of every engineer, the Advisor includes all the essential features for SuperSpeed USB debug.
|
| |
| |
|
The Mercury T2 is the industry's smallest, most affordable hardware-based USB 2.0 protocol analyzer that combines the defacto standard CATC Trace display with powerful analysis features. The pocket-sized Mercury T2 is bus powered and is controlled using any Windows PC. With comprehensive triggering, the Mercury T2 provides much of the same lab quality protocol analysis capabilities offered in Teledyne LeCroy's top-of-the-line USB analyzers.
|
|
|
|
IEEE 1394
|
|
With serial data analysis experience dating back to 1995, Teledyne LeCroy is uniquely positioned to provide 1394-based verification and test tools for the PC and consumer electronics market. A fixture in the early development of IEEE-1394 compliance testing, Teledyne LeCroy’s Fire Inspector analyzer platform is unmatched in its ability to capture and verify 1394A communication links.
|
| |
|
Teledyne LeCroy FireInspector 2.0 is the industry leading IEEE 1394 Bus & Protocol Analyzer / Exerciser that dramatically speeds "time to market" and simplifies complex development projects with its intuitive CATC Trace display of bus traffic. The FireInspector is offered as an analyzer that can also be upgraded to include exerciser capabilities . Advanced analysis features include a tree-structured topology view that updates dynamically with CSR and connection speed information.
|
|
InfiniBand
|
|
The Infiniband architecture supports high speed serial data links operating at 2.5Gb/s and its support of a switch fabric that allows data from any node in the network to communicate to any other node without being routed through a CPU.
|
| |
|
The Teledyne LeCroy IBTracer 4X is an InfiniBand Protocol Analyzer that advances validation and compliance testing for next generation InfiniBand silicon, switches, and software.
|
|
PCI/PCI-X
|
|
Released in 1992, the Peripheral Component Interconnect (PCI) specification standardized the connector and motherboard slots on Intel-based computers. Over the years it has evolved to address higher performance applications and Teledyne LeCroy’s popular TA Series of PCI and PCI-X Analyzers and Exercisers played a vital role helping test, debug, and characterize these PCI systems.
|
| |
|
Teledyne LeCroy’s TA Series of PCI and PCI-X Analyzers and Exercisers allow engineers to quickly and easily analyze, test, debug, and characterize PCI and PCI-X systems, boards, and software. TA700C-B PCI/PCI-X Analyzer/Exerciser operates from 20 MHz to 100 MHz and supports probing through a pass-through auxiliary connector for both 3.3V and 5V signaling environments. PCI & PCI-X Systems Available as rental only (TRS-Rentelco) |
| |
| |
|
Teledyne LeCroy’s TA Series of compact PCI and PCI-X Analyzers and Exercisers allow engineers to quickly and easily analyze, test, debug, and characterize PCI and PCI-X systems, boards, and software. TA700-C Compact PCI/PCI-X Analyzer/Exerciser operates from 66 Mhz/64-bit & PCI-X up to 100 Mhz (analyze) and 66Mhz (exercise) with supports 3.3V and 5V signaling environments. PCI & PCI-X Systems Available as rental only (TRS-Rentelco) |
| |
| |
|
Teledyne LeCroy’s TA Series of PCI and PCI-X Analyzers and Exercisers allow engineers to quickly and easily analyze, test, debug, and characterize PCI and PCI-X systems, boards, and software. The TA700-PDC is a PMC form factor PCI/PCI-X Bus Analyzer / Exerciser compliant with PMC environments up to 66 MHz/64-bit & PCI-X up to 66 MHz with full support for 3.3V and 5V signaling. PCI & PCI-X Systems Available as rental only (TRS-Rentelco) |
|
