Products
Mixed Signal Test Solutions

TF-HDMI-3.3V-QUADPAK

HDMI Pull-Up Terminator Quad Pack for use with the Wilder-Tech HDMI-TPA-P Plug Test Adapter


    Serial Data Test Fixtures


WaveRunner 6 Zi Oscilloscopes
TF-ENET-B - 10/100/1000BaseT Ethernet Test Fixture
TF-USB-B - USB 2.0 Compliance Test Fixture
WaveRunner 8000 Oscilloscopes
TF-ENET-B - 10/100/1000BaseT Ethernet Test Fixture
TF-USB-B - USB 2.0 Compliance Test Fixture
HDO9000 / HDO9000-MS High Definition Oscilloscopes
TF-ENET-B - 10/100/1000BaseT Ethernet Test Fixture
TF-USB-B - USB 2.0 Compliance Test Fixture
VBA9000 Vehicle Bus Analyzer
TF-ENET-B - 10/100/1000BaseT Ethernet Test Fixture
TF-USB-B - USB 2.0 Compliance Test Fixture
DDA 7 Zi-A Disk Drive Analyzers
TF-ENET-B - 10/100/1000BaseT Ethernet Test Fixture
TF-HDMI-3.3V-QUADPAK - HDMI Pull-Up Terminator Quad Pack - For Use with the Wilder-Tech HDMI-TPA-P Plug Test Adapter
TF-SATA-C-Kit - SATA Compliance Test Kit
TF-USB-B - USB 2.0 Compliance Test Fixture
TF-MIPI-MPHY-DUALPAK - MIPI M-PHY input offset adapter dual pack
SDA 7 Zi-A Serial Data Analyzers
TF-ENET-B - 10/100/1000BaseT Ethernet Test Fixture
TF-HDMI-3.3V-QUADPAK - HDMI Pull-Up Terminator Quad Pack - For Use with the Wilder-Tech HDMI-TPA-P Plug Test Adapter
TF-SATA-C-Kit - SATA Compliance Test Kit
TF-USB-B - USB 2.0 Compliance Test Fixture
TF-MIPI-MPHY-DUALPAK - MIPI M-PHY input offset adapter dual pack
WavePro 7 Zi-A Oscilloscopes
TF-ENET-B - 10/100/1000BaseT Ethernet Test Fixture
TF-HDMI-3.3V-QUADPAK - HDMI Pull-Up Terminator Quad Pack - For Use with the Wilder-Tech HDMI-TPA-P Plug Test Adapter
TF-SATA-C-Kit - SATA Compliance Test Kit
TF-USB-B - USB 2.0 Compliance Test Fixture
TF-MIPI-MPHY-DUALPAK - MIPI M-PHY input offset adapter dual pack
WaveMaster / SDA / DDA 8 Zi-B Oscilloscopes
TF-ENET-B - 10/100/1000BaseT Ethernet Test Fixture
TF-HDMI-3.3V-QUADPAK - HDMI Pull-Up Terminator Quad Pack - For Use with the Wilder-Tech HDMI-TPA-P Plug Test Adapter
TF-SATA-C-Kit - SATA Compliance Test Kit
TF-USB-B - USB 2.0 Compliance Test Fixture
TF-USB3 - SuperSpeed and SuperSpeedPlus USB Test Fixtures
TF-10GBASE-T - Test Fixture for 10GBase-T
TF-MIPI-MPHY-DUALPAK - MIPI M-PHY input offset adapter dual pack
LabMaster 9 Zi-A Oscilloscopes
TF-ENET-B - 10/100/1000BaseT Ethernet Test Fixture
TF-HDMI-3.3V-QUADPAK - HDMI Pull-Up Terminator Quad Pack - For Use with the Wilder-Tech HDMI-TPA-P Plug Test Adapter
TF-SATA-C-Kit - SATA Compliance Test Kit
TF-USB-B - USB 2.0 Compliance Test Fixture
TF-USB3 - SuperSpeed and SuperSpeedPlus USB Test Fixtures
TF-10GBASE-T - Test Fixture for 10GBase-T
TF-MIPI-MPHY-DUALPAK - MIPI M-PHY input offset adapter dual pack
LabMaster 10 Zi-A Oscilloscopes
TF-HDMI-3.3V-QUADPAK - HDMI Pull-Up Terminator Quad Pack - For Use with the Wilder-Tech HDMI-TPA-P Plug Test Adapter
TF-SATA-C-Kit - SATA Compliance Test Kit
TF-USB3 - SuperSpeed and SuperSpeedPlus USB Test Fixtures
TF-10GBASE-T - Test Fixture for 10GBase-T
TF-MIPI-MPHY-DUALPAK - MIPI M-PHY input offset adapter dual pack
The TF-HDMI-3.3V adapter provides the necessary 3.3 V pull-up termination for HDMI testing. The TF-HDMI-3.3V provides both a signal path through to the oscilloscope with a 3.3 V pull-up termination as well as an input that is directly terminated to 3.3 V. This is required for terminating the data lines that are not currently under test. The TF-HDMI-3.3V-QUADPAK provides four adapters and 8 SMA-SMA cables to allow for the testing of all HDMI signals (Clock, D0, D1 and D2).

TF-HDMI-3.3V-QUADPAK