Products
Oscilloscopes

DDA 7 Zi-A Disk Drive Analyzers

Based on the WavePro 7 Zi-A Series models, the DDA 7 Zi-A Series Disk Drive Analyzers are available in 3.5 and 6 GHz models and come equipped with 20 Mpts/ch acquisition memory. Dedicated disk drive measurements, trigger and zooming for failure analysis, and serial data measurement capability with a Disk Drive Analyzer user interface are also standard to address high capacity disk drive designs. Operate in either DDA or SDA mode to analyze the serial data links or the physical media behavior on a hard drive.

Explore DDA 7 Zi-A Explore DDA 7 Zi-A
DDA 725Zi-A   (2.5 GHz Bandwidth, 4 Input Channels, 40 GS/s on 2 Ch Max Sample Rate)
Quick Specs
Bandwidth2.5 GHz
Sample Rate40 GS/s on 2 Ch
20 GS/s on 4 Ch
Maximum Acquisition Memory256 Mpts (2 Ch operation)
Input Channels4
Vertical Resolution8-bits
DDA 735Zi-A   (3.5 GHz Bandwidth, 4 Input Channels, 40 GS/s on 2 Ch Max Sample Rate)
Quick Specs
Bandwidth3.5 GHz
Sample Rate40 GS/s on 2 Ch
20 GS/s on 4 Ch
Maximum Acquisition Memory256 Mpts (2 Ch operation)
Input Channels4
Vertical Resolution8-bits
DDA 760Zi-A   (6 GHz Bandwidth, 4 Input Channels, 40 GS/s on 2 Ch Max Sample Rate)
Quick Specs
Bandwidth6 GHz
Sample Rate40 GS/s on 2 Ch
20 GS/s on 4 Ch
Maximum Acquisition Memory256 Mpts (2 Ch operation)
Input Channels4
Vertical Resolution8-bits
Check up to three models.
A Total Solution for Disk Drive Analysis

Maximum Performance
Teledyne LeCroy Disk Drive Analyzers (DDA) assist data storage design engineers by integrating tools that improve the time to market of new products and accelerate understanding and failure analysis on existing drives. Teledyne LeCroy continues that tradition with the DDA 7 Zi-A Series equipped with its powerful Disk Drive Analysis toolset. Capture, view, and analyze the wave shape of high-speed, complex drive signals with speed and integrity.

Data Storage applications are memory intensive as capturing multiple sectors or a complete track of data can be important in troubleshooting a design or characterizing media.

The X-Stream II architecture enables fast and accurate measurements and analysis of disk drive signals. Memory can be extended to 128 Mpts/Ch (256 Mpts/Ch on 2 Ch) using Option L. Both the DDA 760Zi and DDA 735Zi offer the convenience of selectable 50 Ω or 1 MΩ inputs. The standard 20 Mpts of waveform memory and 40 GS/s capture on two channels, means multiple drive sectors can be acquired at once.

Long Memory and Flexibility in Finding Problems
Acquire a head signal up to 6 GHz, and then QuickZoom it from the front panel. The DDA copies and expands the drive signal automatically. Simply scroll horizontally and vertically to examine any sector. Multiple zooms let you view up to eight separate areas of the head signal; each zoom comes in a distinct color. Disk drive parameters let you characterize the pulse width variation or signal-to-noise ratio across a region. Failure Analysis engineers can store and recall golden waveforms and panel setups to compare problem drives with the known good drives. Analog-to-digital converters running at speeds up to 40 GS/s ensure the right sensitivity to measure today's high-speed read channels. In every DDA, you can run your customer-developed scripts to view the captured signal with the filters matched to your channel and media. Custom user scripts can be created in MATLAB, Visual Basic, Excel or other formats.

Exceptional Trigger and Sequence Performance
The DDA's disk triggers allow you to set up a series of events in the signal that then cause a trigger. For example, qualify the signal on the index signal and then capture all the sectors of information on the track. As memory is increased in the DDA, more sectors can be captured, with up to 50 picosecond/sample time resolution. Up to 15,000 sectors of data can be gathered with the DDA 7 Zi-A analyzers. An optional capability, Streaming Sequence, uses the X-Stream II and the fast hardware architecture of the DDA to streamup to 300,000 segments of data to memory; all taken at a high trigger rate.

Natural Graphical Interface
One press on the DDA menu takes you directly to the Disk Drive Analyzer features. The familiar controls on the front panel, coupled with a natural, context-sensitive graphical user-interface, react quickly to your commands. Functionality is exactly where you expect it to be.

The DDA 7 Zi-A provides one button access to all the tools needed to accurately debug and analyze disk drive operation.

The DDA 7 Zi-A features:

  • 31 custom parameters
  • 4 specific drive trigger
    • Sector
    • Servo Gate
    • PES trigger
    • Read Gate Trigger
  • Advanced drive analysis tools
Advanced Disk Drive analysis tools capabilities include:
  1. Head Filter Equalizer emulation
  2. Channel Emulation
  3. SAM Histograms
  4. Plot of SAM values
  5. PES runout analysis
  6. Analog Compare

Simultaneously connecting low-speed signals, like index and servo gate, and high-speed signals, like read channels has never been easier. With integrated 50 Ω and 1 MΩ inputs on all models, there is no longer a need for expensive adapters.

Main Specifications

Bandwidth 3.5 GHz - 6 GHz
Starting from $48,800
Standard Memory 32 Mpts - 256 Mpts
Max Memory 256 Mpts/ch
Max Sampling Rate 40 GS/s
Input Channels 4
Resolution 8-bit
 

Mixed Signal Solutions

MS-500
500 MHz, 18 Channels, 2 GS/s, 50 Mpts/ch Mixed Signal Oscilloscope Option
MS-500-36
250 MHz,36 Ch,1 GS/s,25 Mpts/ch (500MHz,18 Ch,2 GS/s,50 Mpts/ch Interleaved) Mixed Signal Option
MS-250
250 MHz, 18 Channels, 1 GS/s, 10 Mpts/ch Mixed Signal Oscilloscope Option

Memory Options

DDAZi-A-M-64
64 Mpt/Ch (128 Mpt/Ch Interleaved) Memory Option for DDA Zi-A.
DDAZi-A-L-128
128 Mpt/Ch (256 Mpt/Ch Interleaved) Memory Option for DDA Zi-A.

Computer Upgrade

WPZi-500GB-HD
Upgrade from standard size hard drive to 500 GB hard drive
WPZi-500GB-RHD-02
Additional 500 GB Hard Drive for WPZi. Includes Windows 7 OS, LeCroy oscilloscope software and critical scope operational file duplicates.
WPZi-8-UPG-32GBRAM
8 GB to 32 GB CPU RAM Upgrade Option

Remote Control/Network Options

GPIB-2
IEEE 488 GPIB Interface

Power Analysis Software

WPZi-PWR
Power Analysis Option for WP 7 Zi

Serial Trigger and Decode

WPZi-USB2-HSICbus D
USB 2.0 HSIC Decode Option
WPZi-VBA
Vehicle Bus Analyzer Bundle Includes CAN TDM, CAN Symbolic, FlexRay TDP, LIN TD and Protobus MAG.
WPZi-DigRFV4bus D
DigRF V4 Bus Decode option for WavePro Zi series
WPZi-Manchesterbus D
Manchester Bus Decode Option for WavePro Zi
WPZi-ENETbus D
ENET Bus Decode Option for WavePro Zi
WPZi-SATAbus D
SATA Decode option for WavePro Zi Supports SATA Gen 1, 2, and 3.
WPZi-CAN FDbus TDM
CAN FDbus Trigger, Decode & Measure/Graph Option for WavePro Zi
WPZi-1553 TD
MIL-STD-1553 Trigger and decode option for WavePro Zi
WPZi-ARINC429bus DSymbolic
ARINC 429 Bus Symbolic Decode option for WavePro Zi
WPZi-AudioBus TD
AudioBus trigger and decode for WavePro 7Zi
WPZi-AudioBus TDG
AudioBus trigger, decode, and graph for WavePro 7Zi
WPZi-CANbus TD
CAN Bus Trigger & Decode Option for WavePro Zi Series Oscilloscopes
WPZi-CANbus TDM
CAN Bus Trigger, Decode, and Measure Option for WavePro Zi Series Oscilloscopes
WPZi-DigRF3Gbus D
DigRF 3G Bus Decode option for WavePro Zi
WPZi-DPHYbus D
D-PHY Bus Decode option for WavePro Zi
WPZi-FlexrayBus TD
FlexRay Bus Trigger & Decode Option for WavePro Zi Series Oscilloscopes
WPZi-DPHYbus DP
MIPI D-PHY CSI-2, DSI Bus Decode and Physical Layer test option for WavePro 7Zi series
WPZi-FlexRayBus TDP
FlexRay Bus Trigger, Decode, and Physical Layer Test Option for WavePro Zi Series Oscilloscopes
WPZi-HSPT
100 Mb/s to 3.125 Gb/s High Speed Serial Trigger Option for 4-6 GHz Oscilloscopes & Disk Drive Analyzer
WPZi-I2Cbus TD
I2C Bus Trigger & Decode Option for WavePro Zi Series Oscilloscopes
WPZi-MPHYbus D
MIPI M-PHY Bus Decode option for WavePro 7Zi series
WPZi-LINbus TD
LIN Bus Trigger & Decode Option for WavePro Zi Series Oscilloscopes
WPZi-MSPT
100 Mb/s to 1.25 Gb/s Medium Speed Serial Trigger Option for 2.5-3.5 GHz Oscilloscopes and Disk Drive Analyzers
WPZi-PCIEbus D
PCI Express (Gen 1.x, 2.0, and 3.0) Protocol Link Layer Decode Annotation for WavePro 7 Zi Series Oscilloscopes and Analyzers
WPZi-MPHYbus DP
MIPI M-PHY Bus Decode and Physical Layer test option for WavePro 7Zi series
WPZi-PROTObus MAG
Serial Debug Toolkit - Measure Analyze Graph for WavePro Zi Compatible with I2C, SPI, UART, CAN, LIN, FLX, D-PHY, DigRF 3G, DigRF v4, ARINC 429, MIL-STD-1553
WPZi-ProtoSync
Decode Annotation and Protocol Analyzer Software Synchronization Option for WavePro Zi
WPZi-ProtoSync-BT
Decode Annotation and Protocol Analyzer + Bit Tracer Software Synchronization Option for WavePro Zi
WPZi-SPIbus TD
SPI Bus Trigger & Decode Option for WavePro Zi Series Oscilloscopes
WPZi-UART-RS232bus TD
UART and RS232 Bus Trigger & Decode Option for WavePro Zi Series Oscilloscopes
WPZi-USB2bus D
USB 2.0 Bus Decode option for WavePro Zi
WPZi-USB3bus D
USB 3.0 Decode option for WavePro Zi Supports USB 3.0, 2.0, 1.x
WPZI-SENTbus D
SENT Bus Decode Option for WavePro Zi

Digital Filtering Software

WPZi-DFP2
Digital Filter Software Package for WavePro Zi Series

High Speed Output Accessories

LSIB-1
High speed PCIe Gen1 x4 digitizer output for LeCroy oscilloscope. Half-height card
LSIB-HOSTBOARD
PCI Express x4 Host Interface Board for desktop PC
LSIB-HOSTCARD
PCI Express x1 Express Card Host Interface for laptop Express Card slot
LSIB-CABLE-3M
PCI Express x 4 3-meter cable with x4 cable connectors included
LSIB-CABLE-7M
PCI Express x 4 7-meter cable with x4 cable connectors include

Serial Data Compliance

QPHY-BroadR-Reach
QualiPHY Enabled BroadR-Reach Compliance Software Option. Requires either SDA2 or JTA2
QPHY-MIPI-DPHY
QualiPHY Enabled MIPI DPHY Compliance Software Option
WPZI-DDR2-TOOLKIT
DDR2 and LPDDR2 Debug Toolkit for WavePro Zi Oscilloscopes
WPZI-DDR3-TOOLKIT
DDR3, DDR3L, LPDDR3, DDR2, and LPDDR2 Debug Toolkit for WavePro Zi Oscilloscopes
WPZI-UPG-DDR3-TOOLKIT
DDR3, DDR3L, LPDDR3, DDR2, and LPDDR2 Debug Toolkit Upgrade for WavePro Zi Oscilloscopes
QPHY-DDR2
QualiPHY Enabled DDR2 Compliance Software Option
QPHY-DDR3
QualiPHY Enabled DDR3, DDR3L and LPDDR3 Compliance Software Option
QPHY-ENET
QualiPHY Enabled Ethernet 10/100/1000BT Compliance Software Option
QPHY-HDMI
QualiPHY Enabled HDMI Compliance Test Software
QPHY-LPDDR2
QualiPHY Enabled LPDDR2 Compliance Software Option
QPHY-PCIe
QualiPHY Enabled PCIe Gen1 and Gen2 Compliance Software Option
QPHY-SATA-TSG-RSG
QualiPHY Enabled SATA (PHY, TSG, RSG, and OOB) Compliance Software Option
QPHY-USB
QualiPHY Enabled USB 2.0 Compliance Software Option
QPHY-UWB
QualiPHY Enabled WiMedia UWB Compliance Software Option
ENET-2ADA-BNCSMA
Adapter Set- 2 BNC/M to SMA/F
ENET-2CAB-SMA018
Cable Set- 2 SMA-SMA 18 inches
ENET-2CAB-SMA036
Cable Set- 2 SMA-SMA 36 inches

Serial Data Analysis

DDAZi-CompleteLinQ
Bundle - Multi-Lane SDA LinQ Framewk, incl. Eye, Jitter, Noise, Xtalk Meas, w/EyeDrII & VirtualProbe
DDAZi-CrossLinQ
Multi-Lane Serial Data Analysis LinQ Framework, Eye, Jitter, Noise and Crosstalk Measurements
DDAZi-Crosstalk
Single-Lane Serial Data Analysis Framework, Eye, Jitter, Noise and Crosstalk Measurements
DDAZi-LinQ
Multi-Lane Serial Data Analysis LinQ Framework, Eye and Jitter Measurements
WPZi-EYEDRII-VP
Bundle - EyeDrII and VirtualProbe Toolkits
WPZi-EYEDRII
Signal Integrity Toolkit - Channel & Fixture De-embedding/Emulation, Tx/Rx Equalization
WPZi-VIRTUALPROBE
Advanced De-embedding, Emulation and Virtual Probing Toolkit

Other Software Options

WPZi-SPECTRUM
Spectrum Analyzer and Advanced FFT Option for WavePro Zi Series
WPZi-EMC
EMC Pulse Parameter Software Package for WavePro Zi Series

Miscellaneous

KYBD-1
Keyboard, USB
WPZi-HARDCASE
Hard carrying case for all WavePro Zi Series oscilloscopes
WPZi-SOFTCASE
Soft carrying case for all WavePro Zi Series oscilloscopes
RACKMOUNT-1
Rack-mount accessory for converting a WavePro Zi series oscilloscope to an 8U rack-mounted package
TTL-AUX-OUT
TTL Auxiliary output adapter for 7Zi and 8Zi oscilloscopes
Rise-Time-Filter-100ps
PSPL Rise Time Filter - PSPL Part Number 5915-110-100ps
Rise-Time-Filter-150ps
PSPL Rise Time Filter - PSPL Part Number 5915-110-150ps
20dB-SMA-Attenuator
20 dB SMA Attenuators

Synchronize Oscilloscope Options

Zi-8CH-SYNCH
HW Kit to allow combination of channels from two Zi or Zi-A oscilloscopes. Allows combination of all channels from two oscilloscopes (8 channels total) or combination of all 20-30 GHz channels from two 20-30 GHz 8Zi or 8Zi-A oscilloscopes (4 channels total), or combination of 45 GHz channels

Data Storage Software

WPZi-AORM
Advanced Optical Recording Measurement Package for WavePro Zi Series

Mixed Signal Accessories

PK400-1
Large Gripper Probe Set for 0.10 inch (2.54mm) pin pitch. Includes 10 probes with color coded leads
PK400-2
Medium Gripper Probe Set for 0.04 inch (1.0mm) pin pitch. Includes 10 probes with color coded leads
PK400-3
Small Gripper Probe Set for 0.008 inch (0.2 mm) pin pitch. Includes 10 probes with color coded leads
MSO-MICTOR
36 Channel Mictor Connector for MS Series (Includes 1 MSO-MICTOR-SHROUD)
MSO-3M
18 Pin 3M Interface cable MSO-3M (Mates with 3M part number 2520-6002)
MSO-DLS-36
16" Digital Lead Set, D18-D35

Serial Data Test Fixtures

TF-ENET-B
10/100/1000BaseT Ethernet Test Fixture
TF-HDMI-3.3V-QUADPAK
HDMI Pull-Up Terminator Quad Pack - For Use with the Wilder-Tech HDMI-TPA-P Plug Test Adapter
TF-SATA-C-Kit
SATA Compliance Test Kit
TF-USB-B
USB 2.0 Compliance Test Fixture

Active Voltage Probes

ZS4000
4.0 GHz, 0.6 pF, 1 MOhm Active Voltage Probe
ZS2500
2.5 GHz, 0.9 pF, 1 MOhm Active Voltage Probe
ZS1500
1.5 GHz, 0.9 pF, 1 MOhm Active Voltage Probe
ZS1000
1 GHz, 0.9 pF, 1 MOhm Active Voltage Probe
ZS2500-QUADPAK
Set of 4 ZS2500, 2.5 GHz High Impedance Active Probes
ZS1500-QUADPAK
Set of 4 ZS1500, 1.5 GHz High Impedance Active Probes
ZS1000-QUADPAK
Set of 4 ZS1000, 1 GHz High Impedance Active Probes

Current Probes

CP030
30A, 50MHz Current Probe
CP031
30A, 100MHz Current Probe
AP015
30 A, 50 MHz Current Probe - AC/DC, 30 A rms, 50 A Peak Pulse Limited Availability
CP150
150 A, 10 MHz Current Probe - AC/DC, 150 A rms, 500 A Peak Pulse
CP500
500 A, 2 MHz Current Probe - AC/DC, 500 A rms, 700 A Peak Pulse
DCS015
Deskew Calibration Source for AP015

Differential Amplifiers

DA1855A
1 Ch, 100 MHz Differential Amplifier with Precision Voltage Source
DXC100A
÷100 or ÷10 Selectable, 250 MHz Passive Differential Probe Pair
DXC200
÷1, 50 MHz, Passive Differential Probe Pair
DXC-5100
100:1 250 MHz 10 Mohm 2.75pf Differential Probe Pair;
DA101
10:1 1 MOhm Passive Attenuator
DA1855A-PR2
2 Ch, 100 MHz, Differential Amplifier with Precision Voltage Source
DA1855A-PR2-RM
2 Ch, DA1855A with Rackmount (must be ordered at time of purchase, no retrofit)
DA1855A-RM
DA1855A with rackmount;

Differential Probes (<= 1.5 GHz)

AP033
500 MHz Differential Probe
ZD1000
1 GHz, 1.0 pF Active Differential Probe, ±8 V
ZD1500
1.5 GHz, 1.0 pF Active Differential Probe, ±8 V
ZD200
200 MHz, 3.5 pF, 1 MOhm Active Differential Probe, ±20 V
ZD500
500 MHz, 1.0 pF Active Differential Probe, ±8 V

Differential Probes (4-6 GHz)

D410-PS
4 GHz Complete Probe System with Dx10-SI Solder-In Tip (Qty. 1), Dx10-QC Quick Connect (Qty. 1), Dx10-SP Square Pin (Qty. 1), and Dx10-PT-KIT Positioner Tip Browser (Qty. 1)
D420-PS
4 GHz Complete Probe System with Dx20-SI Solder-In Tip (Qty. 1), Dx20-QC Quick Connect (Qty. 1), Dx20-SP Square Pin (Qty. 1), and Dx20-PT-KIT Positioner Tip Browser (Qty. 1)
D610-PS
6 GHz Complete Probe System with Dx10-SI Solder-In Tip (Qty. 1), Dx10-QC Quick Connect (Qty. 1), Dx10-SP Square Pin (Qty. 1), and Dx10-PT-KIT Positioner Tip Browser (Qty. 1)
D620-PS
6 GHz Complete Probe System with Dx20-SI Solder-In Tip (Qty. 1), Dx20-QC Quick Connect (Qty. 1), Dx20-SP Square Pin (Qty. 1), and Dx20-PT-KIT Positioner Tip Browser (Qty. 1)
D410
WaveLink D410 4 GHz/2.5Vp-p and +/-3V Offset Range Differential Amplifier Small Tip Module with Solder-in, Quick Connect, and Square Pin Lead Sets, plus accessories.
D420
WaveLink D420 4 GHz/5Vp-p and +/-3V Offset Range Differential Amplifier Small Tip Module with Solder-in, Quick Connect, and Square Pin Lead Sets, plus accessories.
D610
WaveLink D610 6 GHz/2.5Vp-p and +/-3V Offset Range Differential Amplifier Small Tip Module with Solder-in, Quick Connect, and Square Pin Lead Sets, plus accessories.
D620
WaveLink D620 6 GHz/5Vp-p and +/-3V Offset Range Differential Amplifier Small Tip Module with Solder-in, Quick Connect, and Square Pin Lead Sets, plus accessories.
D400A-AT
WaveLink D400 4 GHz/4.8Vp-p Differential Amplifier Module with Adjustable Tips.
D600A-AT
WaveLink D600 6 GHz/4.8Vp-p Differential Amplifier Module with Adjustable Tips.
WL-PBUS-CASE
WaveLink ProBus Platform/Cable Assembly Kit for D410, D420, and D400A-AT WaveLink Probes.
WL-PLINK-CASE
WaveLink ProLink Platform/Cable Assembly Kit for D610, D620, D600A-AT, and Dxx30 WaveLink Probes.
Dx10-PT-KIT
WaveLink Dx10-PT Adjustable Positioner Tip Kit. Includes XYZ Positioner Assembly with Mechanical Interconnects, Adhesive Kit, Connection Guides, Hand-held Wand, and Replacement Pins(Qty. 4)/Sockets (Qty 2).
Dx20-PT-KIT
WaveLink Dx20-PT Adjustable Positioner Tip Kit. Includes XYZ Positioner Assembly with Mechanical Interconnects, Adhesive Kit, Connection Guides, Hand-held Wand, and Replacement Pins (Qty. 4)/Sockets(Qty. 2).
Dx10-HiTemp
WaveLink Temperature Extension cables for Dx10. Includes 1 set of matched 30" high temperature cables, 1 solder tip lead set
Dx20-HiTemp
WaveLink Temperature Extension cables for Dx20. Includes 1 set of matched 30" high temperature cables, 1 solder tip lead set
Dx10-SI
Replacement Solder tip lead set for D410/D610
Dx20-SI
Replacement Solder tip lead set for D420/D620
TF-DSQ
Probe Deskew and Calibration Test Fixture Limited Availability

Differential Probes (8-13 GHz)

WL-PLINK-CASE
WaveLink ProLink Platform/Cable Assembly Kit for D610, D620, D600A-AT, and Dxx30 WaveLink Probes.
TF-DSQ
Probe Deskew and Calibration Test Fixture Limited Availability

Differential Probes (13-25 GHz)

TF-DSQ
Probe Deskew and Calibration Test Fixture Limited Availability

High Voltage Differential Probes

AP031
700 V, 25 MHz High-Voltage Differential Probe (÷10, ÷100)
ADP300
1,400 V, 20 MHz High-Voltage Differential Probe
ADP305
1,400 V, 100 MHz High-Voltage Differential Probe
HVD3102
25 MHz High Voltage Differential Probe
HVD3106
120 MHz High Voltage Differential Probe

High Voltage Probes

HVP120
400 MHz, 1kV Vrms High-Voltage Passive Probe
PPE1.2KV
10:1/100:1 200/300 MHz 50 MOhms High-Voltage Probe 600V/1.2kV Max. Volt. DC
PPE2KV
100:1 400 MHz 50 MOhms High-Voltage Probe
PPE4KV
100:1 400 MHz 50 MOhms High-Voltage Probe
PPE5KV
100:1 400 MHz 50 MOhms High-Voltage Probe
PPE6KV
1000:1 400 MHz 5 MOhms/50 MOhms High-Voltage Probe

Optical Probes

OE425
Optical-to-Electrical Converter, 500-870 nm ProBus BNC Connector
OE455
Optical-to-Electrical Converter, 950-1630 nm ProBus BNC Connector
OE525
Optical-to-Electrical Converter, 500-870 nm ProLink BMA Connector
OE555
Optical-to-Electrical Converter, 950-1630 nm ProLink BMA Connector
OE695G
Optical to Electrical Converter

Probe Parts and Kits

Dx10-HiTEMP
WaveLink Temperature Extension cables for Dx10. Includes 1 set of matched 30" high temperature cables, 1 solder tip lead set
Dx10-SI-HiTEMP
Replacement Solder tip leadset for use with D410/D610 and temperature extension cables
Dx20-HiTEMP
WaveLink Temperature Extension cables for Dx20. Includes 1 set of matched 30" high temperature cables, 1 solder tip lead set
Dx20-SI-HiTEMP
Replacement Solder tip leadset for use with D420/620 and temperature extension cables
Dxx0-Cable-HiTemp
Replacement 30" matched cable set for use with HiTemp Solder tip leadset
LPA-SMA-A
Pro-Link to SMA Adapter, new style
LPA-SMA-KIT-A
Kit of Pro-Link to SMA Adapter, new style

Transmission Line Probes

PP066
7.5 GHz low capacitance Passive Probe, 500/1K Ohms