Products
Oscilloscope Probes

TPA10-QUADPAK

Set of 4 TPA10 ProBus Probe Adapters


    Probe Adapters


TPA10 - TekProbe to ProBus Probe Adapter
TPA10-QUADPAK - Set of 4 TPA10 TekProbe to ProBus Probe Adapters. Includes soft carrying case.
CA10 - Programmable Current Sensor to ProBus Adapter for use with third party current sensors
TPA10 TekProbe™ Probe Adapter

Key Features
  • Allows TekProbe interface level II probes to work with any ProBus-equipped Teledyne LeCroy oscilloscope
  • Automatic probe detection
  • Provides all necessary power and offset control to the attached probe
  • Supports probes up to 4 GHz
  • Easy firmware updates
  • Wide variety of probes supported including: Preamplifiers, Current Probes, Single-Ended Active Probes and Differential Active Probes
Leverage Existing Probes

Investing in new probes can be very expensive. With the TPA10, existing TekProbe probes can be used on Teledyne LeCroy oscilloscopes, allowing for easy and affordable access to the latest in oscilloscope technology.

Automatic Probe Detection

Simply plug the TPA10 into any ProBus-equipped Teledyne LeCroy oscilloscope, attach a supported TekProbe interface level II probe,and the oscilloscope will automatically detect which probe is attached.

Wide Variety of Supported Probes

The TPA10 ProBus Probe Adapter supports many popular probes up to 4 GHz including: preamplifiers, current probes, single-ended active probes and differential active probes.

Easy Firmware Updates

The firmware for the TPA10 is included in the oscilloscope software. If an updated firmware version for the TPA10 is available, an “Update Firmware” button will automatically appear on the dialog making updates simple.

Supported Probes

Supported probes include many popular Tektronix probes, preamplifiers, current probes, single-ended active probes and differential active probes, such as the Tektronix ADA400A differential preamplifier, the Tektronix TCP202 and TCP202A current probes, the Tektronix P6205, P6243, P6245, P6241, and P6249 single-ended active probes, and the Tektronix P6246, P6247, P6248, P6250, P6250, P5205, P5205A, P5210, and P5210A differential and high voltage differential active probes.

Electrical Characteristics

Bandwidth 4 GHz (adapter only)
Power Supplies +15V, -15V, +5V, -5V (each 2%)
Offset Voltage ±1V (1%)
Maximum Input Voltage 47 Vpk, 33 Vrms
 

Environmental and Safety

Operating Temperature Range 0 to 50 °C
Non-operating Temperature Range -40 to +70 °C
Humidity 5% to 95% RH (10 to 40 °C); 5% to 75% (above 40 °C);RH not controlled below 10 °C
Altitude (Operating) 3000 meters maximum
 

Physical Dimensions

Dimensions (HWD) 31.1 mm x 39 mm x 88.6 mm (1.22" x 1.54" x 3.49")
Weight 119 g (0.26 lb)
 

WaveSurfer 10 Oscilloscope

WaveSurfer 10
  Learn More
WaveSurfer 510 Oscilloscope


  Learn More
HDO4000A High Definition Oscilloscopes


  Learn More
WaveRunner 8000 Oscilloscopes


  Learn More
HDO6000A High Definition Oscilloscopes


  Learn More
HDO8000A High Definition Oscilloscopes


  Learn More
MDA800A Motor Drive Analyzers


  Learn More
WaveMaster / SDA / DDA 8 Zi-B Oscilloscopes


  Learn More