HVD3106A-NOACC

1kV, 120 MHz High Voltage Differential Probe without tip Accessories and with Auto Zero Disconnect

High Voltage Differential Probes

HVD3102A - 1kV, 25 MHz High Voltage Differential Probe with Auto Zero Disconnect

HVD3102A-NOACC - 1kV, 25 MHz High Voltage Differential Probe without tip Accessories and with Auto Zero Disconnect

HVD3106A - 1kV, 120 MHz High Voltage Differential Probe with Auto Zero Disconnect

HVD3106A-NOACC - 1kV, 120 MHz High Voltage Differential Probe without tip Accessories and with Auto Zero Disconnect

HVD3106A-6M - 1kV, 80 MHz High Voltage Differential Probe with 6m cable and Auto Zero Disconnect

HVD3206A - 2kV, 120 MHz High Voltage Differential Probe with Auto Zero Disconnect

HVD3206A-6M - 2kV, 80 MHz High Voltage Differential Probe with 6m cable and Auto Zero Disconnect

HVD3220 - 2kV, 400 MHz High Voltage Differential Probe

HVD3605A - 6kV, 100 MHz High Voltage Differential Probe with Auto Zero Disconnect

AP031 - 700 V, 25 MHz High-Voltage Differential Probe (÷10, ÷100) Limited Availability

The HVD3000A series of high voltage differential probes cover the fullest range of applications, from 120/240 V switch-mode power supplies through 600 V class and 5 kV electrical apparatus. The table below provides a list of recommended probe models based on specific device under test applications.

Device Under Test	Recommended Model	Safety Class	Bandwidth	Cable Length	Tip Accessories Included
120 V/240 V Half-Bridge Circuit Topologies	HVD3102A	1 kV	25 MHz	2 m	Yes
	HVD3102A-NOACC	1 kV	25 MHz	2 m	No
	HVD3106A	1 kV	120 MHz	2 m	Yes
	HVD3106A-NOACC	1 kV	120 MHz	2 m	No
	HVD3220	1.5 kV	400 MHz	2 m	Yes
380 V - 600 V Class Electrical Apparatus	HVD3106A	1 kV	120 MHz	2 m	Yes
	HVD3106A-NOACC	1 kV	120 MHz	2 m	No
	HVD3106A-6M	1 kV	80 MHz	6 m	Yes
	HVD3220	1.5 kV	400 MHz	2 m	Yes
Solar PV Inverter	HVD3106A	1 kV	120 MHz	2 m	Yes
	HVD3206A	1.5 kV	120 MHz	2 m	Yes
	HVD3206A-6M	1.5 kV	80 MHz	6 m	Yes
	HVD3220	1.5 kV	400 MHz	2 m	Yes
5 kV Electrical Apparatus	HVD3605A	6 kV	100 MHz	6 m	Yes

Key Features

1 kV CAT safety rated models
Widest differential voltage ranges available
Exceptional common-mode rejection ratio (CMRR) across a broad frequency range
1% gain accuracy
High offset capability at both high and low attenuation
AC and DC coupling
ProBus active probe interface with automatic scaling
AutoZero with auto disconnect switch
Wide oscilloscope compatibility

Exceptional Common-Mode Rejection Ratio

The CMRR for the probes is exceptional out to very high frequencies, greatly improving measurement capability in the noisy, high common-mode environments found in power electronics. The high CMRR combined with low probe noise and high offset capability provides superior measurement capabilities compared to other HV differential probes.

High Precision Measurements

HVD3000A series probes provide 1% gain accuracy enabling precise voltage measurements. AutoZero capability ensures further measurement precision by allowing small offset drifts to be calibrated out of the measurement. This feature can be applied without removing the HVD3000A leads from the device under test.

Widest Application Coverage

The HVD3000A series cover the fullest range of applications, from 120/240 V switch-mode power supplies through 600 V class and 5 kV class electrical apparatus. Each model has the best available gain accuracy, widest differential and offset voltage range, and superior CMRR.

Complete Probe Integration

The ProBus interface provides power and communication to the probe eliminating the need for a separate power supply or batteries. Attenuation is automatically selected based on oscilloscope gain range (V/div) setting.

Main Specifications
Bandwidth	120 MHz
Input Coupling	DC only
Input Impedance	10 MΩ \|\| 2.5 pF (between inputs) 5 MΩ \|\| 5.0 pF (either input to ground)
Attenuation	50x / 500x
Rise Time (10-90%)	2.9 ns
Differential Voltage Range (High Attenuation)	1500 V (DC + peak AC) from 7 to 500 V/div with up to 1500V offset. 2000 V maximum typical measurable differential voltage before saturation
Differential Voltage Range (Low Attenuation)	27.6 V (DC + peak AC) from 100 mV/div to 6.9 V/div with up to 150V offset.
Common Mode Voltage Range	±1500 V (DC + peak AC), 1000 Vrms (CAT III) (either input to ground)
Maximum Input Voltage to Earth	±2000 Vpk (nominal, either input to ground)
Max Safe Input	1000 Vrms CAT III per IEC/EN 61010-031/A1:2008
Sensitivity	100 mV/div to 6.9V/div (50X) 7V/div to 500V/div (500X)
Gain Accuracy	1% (LF, guaranteed)
Slew Rate	400 V/ns (maximum)
Output Coupling	AC or DC coupling
Output Termination	1 MΩ
Interface	ProBus
Input Lead Length	40 cm input lead length
Cable Length (input lead to oscilloscope connection)	2.25 m

Noise and Rejection
CMRR (Typical)	DC - 60 Hz: 85 dB 1 MHz: 65 dB 5 MHz: 40 dB 20 MHz: 30 dB 100 MHz: 30 dB
Noise (Probe)	50X: <30 mVrms 500X: <150 mVrms (referred to input)

Environmental and Safety
Temperature (Operating)	0°C to 50°C
Temperature (Non-Operating)	-40°C to 70°C
Humidity (Operating)	5% to 80% RH (Non-Condensing) up to 30°C, decreasing linearly to 45% RH at 50°C
Humidity (Non-Operating)	5% to 95% RH (Non-Condensing), 75% RH above 30°C, 45% RH above 40°C
Altitude (Operating)	3,000 m maximum When used with clip accessories, 2000 m maximum
Altitude (Non-Operating)	10,000 m
Pollution Degree	2, Indoor use only