Protocol Analyzers

SAS Sierra M6-1

The portable single port multifunctional analyzer system for SAS2 and SATA (6G)

Explore SAS Sierra M6-1 Explore SAS Sierra M6-1
SAS Sierra T244  The Industry's first SAS 4.0 protocol analyzer provides accurate and reliable capture of up to four SAS 24 Gb/s physical links for efficient test and debug of next generation storage systems.
SAS Sierra M244  The industry's first SAS 4.0 protocol analyzer / jammer system for testing next generation storage systems, devices and software.
SAS Sierra M124A  The flagship four port analyzer, exerciser and error injection system provides the most accurate and reliable capture of SAS 12 Gb/s protocol for fast debug, analysis and problem solving.
SAS Sierra M122A  The flagship two port analyzer, exerciser and error injection system provides the most accurate and reliable capture of SAS 12 Gb/s protocol for fast debug, analysis and problem solving.
SAS Sierra M6-2  The flexible two port multifunctional analyzer system for SAS2 and SATA (6G)
SAS Sierra M6-1  The portable single port multifunctional analyzer system for SAS2 and SATA (6G)
Serial Attached SCSI (SAS) is the next-generation replacement of SCSI Ultra320. SAS is a serialized protocol. The serial interface offers several benefits over the existing SCSI parallel bus; allowing for high availability, complex storage topologies, and a lower cost structure.
High Availability: As with SATA, Serial Attached SCSI is a high-speed, point-to-point technology initially designed to operate at speeds up to 6Gb/sec. System designers have found that point-to-point serial connections are inherently more reliable than shared bandwidth parallel connections. As a result, point-to-point serial connections have become the preferred method for implementing high-availability systems. SAS based disk drives are dual ported, taking advantage of this feature. This is a key requirement of high-availability SANs that call for redundant paths to all devices in the system.
Complex Storage Environments: SAS storage environments usually consist of a mixture of disk drives, host bus adapters and expanders. SAS allows for addressing of over 16,000 devices. SAS Expanders are routing devices that forward service requests between the source and destination devices. Expanders can be attached to other expanders, disk drives, and other hosts. An important characteristic of Expanders is their ability to aggregate bandwidth by combining multiple physical links into a "Wide" port. These wide ports can function as intelligent switches and can independently send commands across one physical path with data being returned over a different physical path. This increases the complexity of SAS test and debug because it requires users to monitor multiple links concurrently to record all DWORDs associated with a single SCSI transaction. The usage of expanders also allows for usage of a storage concept called Zoning. Zoning allows administrators to restrict access to devices by other devices. Applications of this include separating storage systems within a company by department.
Lower Cost Structure: Serial Attached SCSI also contains support for SATA drives in its storage environments. This allows support for both enterprise-class performance offered by SAS and low cost storage with SATA drives in the same system. Since the cost of the SAS infrastructure is expected to be comparable to SATA, it is likely that SAS will be the preferred interface. Since both SAS and SATA drives can be used in this environment, it will simplify and standardize the storage infrastructure, allowing for the ability to choose which drive will best fit individual storage needs.
Protocol Analysis
SAS Test and Verification: LeCroy's protocol analysis tools are designed from the ground up to address these unique characteristics of SAS including wide-links and Serial ATA interoperability. Sierra’s analysis and design suites are developed specifically for use with the SAS and SATA protocols, and provide extensive protocol decoding, expert error analysis, and complete user support when decoding and viewing the recorded traffic. This extensive protocol support, combined with the different traffic views, advanced triggering, data filtering, traffic generation, and error injection capability, allows engineers to rapidly become familiar with SAS- and SATA-specific issues, and quickly understand new issues the first time they encounter them. Every engineer becomes a protocol expert with the support of Sierra’s detailed expert analysis.

The Sierra M6-1 products are ultra-portable single-port systems that can be purchased either as a protocol analyzer, or as an error injector. Measuring just 6.25" wide, 1.38" high, 9.0" deep (15.9 x 3.5 x 22.9 cm) and weighing in at 1.7 lbs (0.77 Kg), Sierra M6-1 systems are incredibly compact units fitting easily into the corner of a brief case or backpack. Operating at 1.5, 3, or 6 Gb/s SAS or SATA data rates, and available with 2 GB, 4 GB, and 8 GB of recording memory, Sierra M6-1 systems offer world-class protocol verification capability at price points within reach of every budget.

Flexibility to Meet any Debug Challenge

Sierra M6-1 systems come standard with both USB and GbE interface ports for maximum flexibility in connecting to the PC used to host Teledyne LeCroy's SAS/SATA Protocol Suite software. The versatile GbE port can be used for either local or remote network connectivity. Sierra M6-1 systems can be linked together in cascade configurations to provide additional recording channel capacity, enabling simultaneous error injection and trace capture/analysis (requires multiple Sierra M6-1 units, at least one licensed as a protocol analyzer model and one licensed as an error injector).

The Sierra M6-1 data capture capabilities include Easy Mode triggering to provide engineers with the ability to capture precise traffic conditions such as timing between events or changes in link state. Easy Mode triggering conditions can be set up quickly through very straightforward, easily understood drop-down menu selections.

Native PHY for Efficient Lock-Time

The Sierra M6-1 incorporates 6 Gb/s capable native PHYs for better capture performance in speed negotiation and power management phases.

Compact System Design

Sierra M6-1 products are designed for convenience, portability, and functionality. The front panel provides convenient access to Host and Device data bus connectors and 5 status indicator LEDs for each connectors (Trigger, Error, Link, Speed, Data). The Sierra M6-1 rear panel provides a multifunction connector for External Trigger IN/OUT and SYNC Expansion Port; USB 2.0; 10/100/1000baseT Ethernet; and DC power in connections.


Sierra M6-1 SAS/SATA Protocol Suite

Sierra M6-1 models are software compatible with the Teledyne LeCroy SAS/SATA Protocol Suite and offer the same full range of features as the other products in the Teledyne LeCroy SAS/SATA product line. The SAS/SATA Protocol Suite offers an intuitive GUI (Graphical User Interface) combining easy setup with flexible data analysis displays. From the link layer to the application layer, Sierra M6-1 offers a wide range of traffic views and tools to enable engineers to easily zero-in on areas of interest, as follows:

  • Column View shows the handshaking of primitives, and frame composition from SOF to EOF
    • Data can be viewed in 8b/10b or scrambled formats
  • Text View is useful for working at the fame level to show exchanges of frames and accompanying primitives
  • Spreadsheet View shows commands and frames in chronological order and provides the flexibility to easily filter out unwanted primitives or frames to focus on what is important to the issue under investigation
  • Waveform View shows a waveform display for all active ports
    • Useful to perform timing measurements for functions OOB signaling
  • Packet View is specifically designed for analysis of the application layer of a protocol
    • Frames and primitives that are logically part of a specific SAS or SATA command are assembled for quick and easy review
    • Allows users to quickly view command definitions, completion, and status

The capabilities of the SAS/SATA Protocol Suite software are especially useful in addressing system-level debug challenges. Users can quickly drill down on commands to view the frame and link layers. All of the analysis views can be used simultaneously and are automatically synchronized and displayed within one application.


Statistical Reports

Statistical reports provide a wealth of statistical and performance reports on events and error counters, as well as performance metrics, providing users with a snapshot into captured traces and rapid access to items of interest.

The screen shot above shows an example of a Packet View in the top half of the image and a Statistical Report in the bottom half of the image.

Sierra M6-1 SAS/SATA InFusion Software

The Sierra M6-1 InFusion model performs as a stand-alone 1.5, 3, 6 Gb/s version of the Teledyne LeCroy InFusion error injector, allowing engineers to modify traffic in order to verify real-world fault handling. While sitting in the data path on a live system, InFusion can programmatically alter or corrupt traffic. The Sierra M6-1 InFusion solution is the ideal tool for stress testing systems while running real traffic and actual workloads.

Sierra M6-1 InFusion is designed to verify recovery characteristics within a sub-system. The user can change any field, within any frame, as the data moves across the link. Any primitive or data pattern can be intercepted and changed to a different specified pattern. This allows for unprecedented corner case and protocol level error injection for SAS and SATA traffic.

The InFusion system will wait for a user configurable time interval or count a particular number of events before it begins modifying frames or injecting errors and it can be configured to send a single error, multiple errors, or random errors. When changing fields within a frame, the InFusion traffic modifier preserves the outbound frame structure, including recalculating the CRC if needed. The response from the device-under-test will pass through the system, without modification. This allows true end-to-end system testing. InFusion software maintains a log that contains a summary of the exchanges.

An easy-to-use pop-up menu interface enables users to start creating test scenarios in just minutes. Dual sequencers support sophisticated error injection strategies with up to 256 sequential wait states per sequence. Each state can be configured to check for different conditions or inject different errors before branching to the next state. Looping allows the error injection sequence to repeat at specific intervals. Each sequential state can also include timers and counters to better isolate specific link conditions.


Key Sierra M6-1 Features:
  • Ultra-portable single-port systems
  • Supports a single link of SAS or SATA up to 6Gb/s
  • Protocol Analysis or InFusion (error injection) functionality
  • Native PHY for fast lock time
  • Synchronize with other Teledyne LeCroy STX and Sierra products for multi-port capability
  • GbE and USB 2.0 host interfaces
Key Analyzer Features:
  • Easy Mode Triggering Sequencer
  • Hardware filtering
  • Automatic error detection
  • Comprehensive SAS and SATA decoding
  • Logical & chronological traffic displays
  • Statistical reporting
  • 2 GB, 4 GB, and 8 GB trace memory options
Key InFusion Features:
  • Pop-up menu user interface for easy set-up of IF-THEN scenarios
  • C++ based API for customer programming
  • 2 GB memory
  • Modifiable elements of SAS or SATA protocol
    • All primitives including user defined
    • CRC
    • SSP, SMP, STP connection events
    • Frame headers including address and tag fields
    • Payload data, including CDB and LBA
    • Disparity errors
Sierra M6-1 Specifications
Protocols SupportedSAS and SATA or SATA only
Host Requirements Windows 7®, Windows® XP, Windows® Vista, or Windows Server 2003, Intel Pentium II processor or greater, USB 2.0, or 100/1000 Ethernet capable
Recording Memory Size 2 GB, 4 GB, and 8 GB options for analyzer models, 2 GB only for InFusion models
Data Rates Supported1.5, 3, or 6 Gb/s
No. of Ports Supported  1 port per system
Cascade CapabilityUp to 8 ports (8 systems)
TriggeringEasy Mode Sequential Triggering - See options section below for license information on Advanced Mode State Machine Triggering
FilteringPre-recording and Post-recording
Data Bus Interface SAS or SATA up to 6 Gb/s
Host InterfaceUSB 2.0 and 10/100/1000baseT Ethernet 
Front Panel Connectors 2 Internal SATA bus Connectors (Host &Device)
Rear Panel Connectors Multi-Function connector combines External Trigger IN/OUT, and Sync Expansion Port; USB 2.0; 10/100/1000baseT Ethernet; DC power
Front Panel Indicators5 LEDs each for Host and Device Ports (Trigger, Error, Link, Speed, Data); Power LED; Status LED
Rear Panel ControlsPower ON/OFF
Dimensions (W x H X D)15.9 cm x 3.5 cm x 22.9 cm (6.25" x 1.38" x 9.0")
Weight 0.77 Kg (1.7 lbs.) 
Power Requirements 12V DC (90–254 VAC, 47–63 Hz for supplied AC adapter)
Operating Temperature0 to 50 C (32 to 121 F)
Non-operating-20 to 80 C (-4 to 176 F)
Operating Humidity10% to 90% RH (non-condensing)
Software License Options
CrossSync Multi-Protocol Analysis option
SAS/SATA InFusion License for Sierra M6-1 Analyzer
SAS/SATA Analyzer License for Sierra M6-1 InFusion
One Year Extended Hardware Warranty
Advanced Triggering Mode License for Sierra M6-1 Products