T3DSO31004

• 200 MHz, 350 MHz, 500 MHz & 1 GHz bandwidths.
• Sample rates up to 5 GS/s.
• Long Memory – up to 125 Mpts/Ch (250 Mpts interleaved).
• 10.1" capacitive color TFT-LCD touch screen (1024 x 600).
• Includes Serial Bus Decoders for I2 C, SPI, UART, CAN, LIN, CAN FD, I2 S, MIL-STD-1553B, FlexRay, SENT & Manchester.
• Includes Bode Plot from 10 Hz to 25 MHz using the T3DSO1000–FGMOD–A function/arbitrary waveform generator or Bode Plot measurements from 10 Hz to 120 MHz using the T3AFG120 arbitrary function generator.
• Power Analysis application included as standard, measuring power quality, current harmonics, inrush current, switching loss, slew rate, modulation, output ripple, turn on/turn off, transient response, PSRR, efficiency.
• Optional MSO – 16 Digital Channels. This adds mixed signal debugging to the T3DSO3000 Oscilloscope series.
• Optional 25 MHz function/arbitrary waveform generator. 6 waveform types (Sine, Square, Ramp, Pulse, DC, Noise) and 45 Arbitrary waveforms. (Option T3DSO1000–FGMOD–A)
• Advanced Trigger – Edge, Slope, Pulse Width, Window, Runt, Interval, Dropout, Pattern, Video, Qualified & Serial.
• Waveform capture rate up to 110,000 wfm/s (normal mode), and 500,000 wfm/s (sequence mode).
• Connectivity – Multiple interface types: USB Host, USB Device (USBTMC), LAN, Trigger In/Out

The record length of up to 250 Mpts (interleaved) allows the use of a higher sampling rate to capture more signal detail. The hardware-based Zoom then allows quick zoom in to any area of interest.

With a waveform capture rate of up to 500,000 wfm/s (sequence mode) and 110,000 wfm/s (standard mode) users can easily capture glitches, infrequent anomalies, and other low-probability events.

The always enabled History mode records up to 100,000 waveforms allowing users to scroll back through previous acquisitions to analyze past events and locate anomalies quickly. Serial decode, zoom and cursor measurements can be used.

Two Math traces support Plus, Minus, Multiply, Divide, FFT, integration, differential, square root, and formula editor, providing a quick insight into the waveform characteristics.

Set up to 2 zones defining each as either an Intersect or a Non Intersect. Trigger occurs when conditions are met. Zone Trigger helps to simplify advanced triggering.

This function is ideal for viewing modulated and changing waveforms. The color temperature display clearly shows noise and jitter with infrequent occurring waveforms shown in blue through to the most frequently occurring waveforms shown in red.

Segmented memory mode can store up to 100,000 waveforms into memory segments for capturing fast events in quick succession. Combine Sequence Mode with advanced triggers to isolate rare events. All the segments can be play back using the History function.

Automatic measurement function for over 50 parameters as well as Histograms, Statistics, Zoom, Gating, Math, Trend, History and Reference functions.

Enhanced Resolution (ERES) function reveals hidden waveform detail by using a linear average filter to reduce waveform noise on single acquisition waveforms, where regular averaging will not work. The ERES acquisition mode is hardware based, allowing waveforms to be captured at a faster rate.

The MSO option adds 16 digital channels to the T3DSO3000 enabling users to trigger and acquire digital as well as analog waveforms in a mixed signal debug environment.

The embedded web server enables users to control the T3DSO3000 oscilloscopes from a single browser web page. This provides users with an easy to use, familiar, browser based, remote control interface for remote monitoring and troubleshooting.