Test Solutions for Peripherals

Physical Layer

The first board turn provides the foundation for your design. Teledyne LeCroy’s WavePulser 40iX High-speed Interconnect Analyzer helps quickly and economically identify layout and interconnect issues. High Definition Oscilloscopes from 200 MHz – 8 GHz and power rail probes sniff out power integrity problems.

Protocol Layer

In addition to compliance verification and error injection, the Voyager exerciser can emulate a USB endpoint allowing developers to test power-on behaviors with complete control of timing and link states. Fully configurable, the exerciser supports simultaneous generation of USB and PD traffic allowing users to verify low-level protocol behaviors.

Featured Products

• WavePulser 40iX

  Analyzer

  The combination of S-parameters (frequency domain) and Impedance Profiles (time domain) in a single acquisition with a deep toolbox provides unmatched characterization insight of high-speed interconnects.

• WavePro HD

  Oscilloscope

  Up to 5 Gpt of highly responsive acquisition memory gives more visibility into system behavior, and the exceptional analysis toolbox enables deep insight.

• Voyager M4x

  Analyzer / Exerciser

  The industry’s first USB 3.2, USB4 and Thunderbolt™ 3 testing and verification platform.

• Voyager M310e

  Analyzer / Exerciser

  The workhorse protocol verification system for testing and emulating USB 2.0, USB 3.1, Type-C and Power Delivery protocol behaviors.

Physical Layer

8 GHz – 65 GHz high-bandwidth real-time oscilloscopes provide the required performance for multi-lane signal integrity testing at all data rates and all phases of the lifecycle.

Protocol Layer

In addition to compliance verification and error injection, the Voyager exerciser can emulate a USB endpoint allowing developers to test power-on behaviors with complete control of timing and link states. Fully configurable, the exerciser supports simultaneous generation of USB and PD traffic allowing users to verify low-level protocol behaviors.

Featured Products

• Voyager M4x

  Analyzer / Exerciser

  The industry’s first USB 3.2, USB4 and Thunderbolt™ 3 testing and verification platform.

• Voyager M310e

  Analyzer / Exerciser

  The workhorse protocol verification system for testing and emulating USB 2.0, USB 3.1, Type-C and Power Delivery protocol behaviors.

Protocol Layer

Since the introduction of serial storage technologies, Teledyne LeCroy has evolved their storage analyzer family with a range of solutions that address every stage of the product validation process. With best-in-class features including non-intrusive probing, automated compliance suites and easy to use software, Teledyne LeCroy leads the industry with countless innovations in data analysis to help reduce time-to-market for storage devices, systems and software.

Physical Layer

Debug link training state machine and other digital issues ProtoSync™ oscilloscope-based protocol analysis software and DH Series Active Differential Probes. Debug USB Power Delivery issues using Passive Probes with Power Delivery TDME software.

Protocol Layer

Teledyne LeCroy’s legendary Voyager analyzer platform provides the industry’s most accurate and reliable capture of USB4, USB 3.2 and Thunderbolt 3™ protocols for fast debug, analysis and problem solving. Featuring the CATC Trace - the industry's de facto standard display for USB protocol analysis, this customizable application shows all packets labeled and decoded in a single display allowing designers and validation teams to quickly debug problems and verify interoperability for next-generation USB systems.

Physical Layer

Teledyne LeCroy LabMaster and WaveMaster oscilloscopes with QualiPHY compliance test software is the heart of Tx and Rx compliance testing. QPHY-USB4-TX-RX and QPHY-USB3.2-TX-RX works in conjunction with the Anritsu MP1900A to provide fully automated testing. The LabMaster 10 Zi-A features the industry’s only ‘Multi-Lane Compliance Test Architecture’, which results in faster compliance test throughput for USB4 and DisplayPort 2.0 over USB-C (two and four lane serial) device configurations.

Protocol Layer

The Voyager M310e with USB 3.1 and PD compliance options provide comprehensive support for Type-C, PD, Link Layer and Hub compliance testing. The M310e utilizes an integrated exerciser capable of emulating host and endpoint behaviors for USB 2.0, 3,1, in addition to PD Source, Sink and Dual-Role devices. Now enhanced to support all the latest Type-C compliance checks plus the Power Delivery eye-diagram tests, the M310e is the 'one-stop' solution for USB certification.

Physical Layer

Capture and review traffic ensuring that all errors and issues have been resolved and that performance meets design requirements.

Protocol Layer

Resolving corner-case interoperability issues requires flexible triggering across the protocol stack. The Voyager family features hardware triggering with multi-level sequential event monitoring that can detect timing, protocol or handshake errors. For system level test, the Voyager provides visibility to software issues by automatically assigning USB decodes including MTP, CCD, Video and Mass storage class.

Physical Layer

Bug fixes as well as software and hardware updates need to be tested, reviewed and matched against previous releases to provide forward compatibility and compliance to the specification.

Protocol Layer

USB remains the dominant interconnect technology in the consumer electronics market and continues to deliver innovative features in power management, ease of use and reliability. Teledyne LeCroy offers the broadest and deepest solution set for USB test and continues to support developers with free software updates, automation tools, and timely support for the latest enhancements in the USB specifications.