The following are a list of features and benefits for the Envision X14 Analyzer and Generator.
Analyzer
Source Analysis
Deep protocol capture and analysis all packet types and data formats, command and video modes, high speed and low power read and write modes, and DCS supported.
Display Stream Compression (DSC)
Decode incoming DSC encrypted content from a DSI host including parsing the Picture Parameter Set (PPS) metadata parameters.
Data Rates
For D-PHY 9.0 Gbps D-PHY data transfer rate per data lane – Scalable from 1-4 data lanes.
For C-PHY 6.0 GSps C-PHY data transfer rate per data lane – Scalable from 1-3 Trios/data lanes.
Passive Monitoring
Passively monitor and capture traffic between a device and host with solder down probes.
Protocol Verification
PHY-level and protocol level events including low-power, high speed bursts and read/writes.
Event-Based Capture
Complex event-based transaction capturing with 2.5ns event timing resolution for detailed self-checking and debug.
Debug Analysis
Debug and analysis statistics for received data and errors including CRC, ECC, SoT and EoT, etc.
External Trigger In / Out
Trigger external equipment based on packet structures or event; trigger a capture from an event on an external device.
Conformance Test Suite
Conformance Test Specification (CTS) for CSI-2 and DSI-2 for evaluating your device against specifications.
Generator (Exerciser)
MIPI Camera Serial Interface (CSI-2) Specifications
Create and generate all packet types, data formats and frame timing. Also generate Camera Control Interface (CCI) responses.
MIPI Display Serial Interface (DSI-2) Specification
Generate a stream of images and frames at various resolutions and timings.
Data Rates
D-PHY support at 9.0 Gbps data transfer rate per data lane - Scalable from 1-4 lanes. C-PHY supports 6Gs/s - Scalable from 1-3 lanes.
Detailed Protocol Checking
PHY-level and protocol level events including low-power and writes/reads.
Advanced Trigger
Start and stop generate on protocol events, data patterns, and external triggers.
External Trigger In / Out
Use the Teledyne LeCroy Envision X14 to generate any event and toggle a scope or logic analyzer (via SMA connectors).