|
|
* 販売終了しました。
高精度オシロスコープ
HDO9000シリーズ
4GHz帯域で10ビット、40GS/sを実現!
HDO9000シリーズは、広帯域、高速サンプリング速度、高分解能の3拍子揃った高精度オシロスコープです。さらに15.4インチの大画面タッチスクリーンと、タブレット感覚で操作できるOneTouch MAUI
(ワンタッチマウイ)ユーザ・インタフェースにより新次元の操作性を提供します。
デモビデオを見る (日本語字幕付き)
基本仕様
モデル名 |
帯域 |
ch数 |
サンプリング
速度 |
標準メモリ |
垂直分解能、その他 |
HDO 9104
販売終了
|
1GHz |
4ch |
20GS/s
〜40GS/s
|
64Mポイント/ch
(128Mポイント
@2ch) |
10ビット
(最適化フィルタの適用で最大13.8ビット) |
HDO 9204
販売終了
|
2GHz |
HDO 9304
販売終了
|
3GHz |
HDO 9404 |
4GHz |
ミックスド・シグナル・オシロスコープ |
HDO 9104-MS
販売終了
|
1GHz |
4ch
+
デジタル
16ch |
20GS/s
〜40GS/s
|
64Mポイント/ch
(128Mポイント
@2ch) |
10ビット
(最適化フィルタの適用で最大13.8ビット) |
HDO 9204-MS
販売終了
|
2GHz |
HDO 9304-MS
販売終了
|
3GHz |
HDO 9404-MS
販売終了
|
4GHz |
モデルごとスペック詳細(モデル名をクリックで詳細表示されます)
HDO9104 スペック
Vertical - Analog Channels | Analog Bandwidth (Max) | 1 GHz | Analog Bandwidth @ 50 Ω (-3 dB) (ProBus Input) | 1 GHz
(≧2 mV/div) | Analog Bandwidth @ 1 MΩ (-3 dB) (ProBus Input) | 1 GHz (typical) | Rise Time (10-90%, 50 Ω) | 415 ps (typical) | Rise Time (20-80%, 50 Ω) | 290 ps (typical) | Input Channels | 4 | Vertical Resolution | 10 bits, up to 13.8 bits with Optimized Filtering | Effective Number of Bits (ENOB) | 7.9 bits (typical) | Vertical Noise Floor (1 mV/div) | 160 uV | Vertical Noise Floor (2 mV/div) | 160 uV | Vertical Noise Floor (5 mV/div) | 175 uV | Vertical Noise Floor (10 mV/div) | 184 uV | Vertical Noise Floor (50 mV/div) | 435 uV | Vertical Noise Floor (100 mV/div) | 761 uV | Vertical Noise Floor (200 mV/div) | 2.73 mV | Vertical Noise Floor (500 mV/div) | 4.67 mV | Vertical Noise Floor (1 V/div) | 7.79 mV | Sensitivity | 50 Ω: 1 mV-1 V/div, fully variable; 1 MΩ: 1 mV-10 V/div, fully variable | DC Vertical Gain Accuracy (Gain Component of DC Accuracy) | ±(1%) F.S, offset at 0 V | Channel-Channel Isolation | DC up to rated BW: 40 dB (>100:1), (For any two ProBus input channels, same v/div settings, typical) | Offset Range | 50 Ω ±1.6 V @ 1 mV - 4.95 mV/div ±4 V @ 5 mV - 9.9 mV/div ±8 V @ 10 mV - 19.8 mV/div ±10 V @ 20 mV - 1 V/div
1 MΩ ±1.6 V @ 1 mV - 4.95 mV/div ±4 V @ 5 mV - 9.9 mV/div ±8 V @ 10 mV - 19.8 mV/div ±16 V @ 20 mV - 100 mV/div ±80 V @ 102 mV - 1.0 V/div ±160 V @ 1.02 V - 10 V/div | DC Vertical Offset Accuracy | ±(1.5% of offset setting +1% of full scale + 1 mV) (test limit) | Maximum Input Voltage | 50 Ω: 5V RMS ± 10V peak 1 MΩ: 400 V max. (DC + peak AC < 10 kHz) | Input Coupling | 1 MΩ: AC, DC, GND; 50 Ω: DC, GND | Input Impedance | 50 Ω+/-2% or 1 MΩ||17pF, 10 MΩ || 9.5 pF with supplied Probe | Bandwidth Limiters | 20MHz, 200MHz, 500 MHz | | Horizontal - Analog Channels | Timebases | Internal timebase common to 4 input channels; an external clock may be applied at the EXT input | Time/Division Range | 20 ps/div - 6.4 ks/div RIS available at ≦ 10 ns/div;
Roll Mode available at ≧ 100 ms/div and ≦ 5 MS/s | Clock Accuracy | <=1.5 ppm +(aging of 0.5 ppm/yr from last calibration) | Channel-Channel Deskew Range | ±9 x time/div. setting, each channel | External Timebase Reference (Input) | 10MHz +/-25ppm into 50 ohms | External Timebase Reference (Output) | 10MHz, 3.5 dBm +/-1dBm, syncronized to reference being used (internal or external reference) | External Clock | DC to 100 MHz; (50 Ω/1 MΩ), EXT BNC input, Minimum rise time and amplitude requirements apply at low frequencies. | | Acquisition - Analog Channels | Sample Rate (Single-shot) | 20 GS/s on 4 Ch 40 GS/s on 2 Ch | Sample Rate (Repetitive) | 200 GS/s for repetitive signals (20 ps/div to 10 ns/div) | Memory Length (4 Ch / 2 Ch / 1Ch) (Number of Segments) | 64M / 128M / 128M (15,000) | Intersegment Time | 1 μs | Averaging | Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps | Envelope (Extrema) | Envelope, floor, or roof for up to 1 million sweeps | Interpolation | Linear or Sin x/x (2 pt and 4 pt) | | Triggering System | Modes | Normal, Auto, Single, and Stop | Sources | Any input channel, Ext, Ext/10, or line; slope and level unique to each source (except line trigger) | Coupling | DC, AC, HFRej, LFRej | Pre-trigger Delay | 0-100% of memory size (adjustable in 1% increments of 100 ns) | Post-trigger Delay | 0-10,000 Divisions in real time mode, limited at slower time/div settings or in roll mode | Trigger Sensitivity with Edge Trigger ProBus Inputs | 2 div @ < 1 GHz 1.5 div @< 500 MHz 1 div @ < 200 MHz 0.9 div @<10 MHz (DC, AC, and LFRej coupling, ≧ 10 mV/div, 50 Ω) | External Trigger Sensitivity, (Edge Trigger) | 2 div @ 1 GHz 1.5 div @ < 500 MHz 1 div @ <200 MHz 0.9 div @<10 MHz (DC, AC, and LFRej coupling) | Hold-off | From 2 ns up to 20 s or from 1 to 99,999,999 events | Internal Trigger Level Range | ±4.1 div from center (typical) | External Trigger Level Range | Ext (±0.4 V); Ext/10 (±4 V) | Maximum Trigger Rate | 1,000,000 waveforms/second (in Sequence Mode, up to 4 channels) | Max Trigger Frequency (C1-C4, Aux In, SMART Trigger) | 1.0 GHz @ ≧ 10 mV/div (minimum triggerable width 750 ps) | | Trigger Types | Edge | Triggers when signal meets slope (positive, negative, or either) and level condition. | Width | Triggers on positive or negative glitches with selectable widths. Minimum width 500 ps, maximum width: 20 s | Glitch | Triggers on positive or negative glitches with selectable widths. Minimum width 200 ps, maximum width: 20 s | Window | Triggers when signal exits a window defined by adjustable thresholds | Pattern | Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don't care. The High and Low level can be selected independently. Triggers at start or end of the pattern. | TV-Composite Video | Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative). | Runt | Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns. | Slew Rate | Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns. | Interval | Triggers on intervals selectable between 1 ns and 20 s. | Dropout | Triggers if signal drops out for longer than selected time between 1 ns and 20 s. | Exclusion Triggering | Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met | Measurement Trigger | Select from a large number of measurement parameters trigger on a measurement value with qualified limits. Can be used as only trigger or last event in a Cascade Trigger. | Multi-Stage: Qualified | Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events. | Multi-Stage: Qualified First | In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events. | Multi-Stage: Cascade (Sequence) Trigger, Capability | Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. | Multi-Stage: Cascade (Sequence) Trigger, Types | Cascade A then B: Edge, Window, Pattern (Logic) Width, Glitch, Interval, Dropout, or Measurement. Measurement can be on Stage B only. Cascade A then B then C (Measurement): Edge, Window, Pattern (Logic), Width, Glitch, Interval, Dropout, or Measurement. Measurement can be on Stage C only. Cascade A then B then C: Edge, Window, Pattern (Logic) | Multi-Stage: Cascade (Sequence) Trigger, Holdoff | Holdoff between A and B or B and C is selectable by time (1ns to 20s) or number of events. Measurement trigger selection as the last stage in a Cascade precludes a holdoff setting between the prior stage and the last stage. | | Low Speed Serial Protocol Trigger (Optional) | Optionally available | I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN1.1, CAN2.0, CAN FD, LIN, FlexRay, MIL-STD-1553, AudioBus (I2S, LJ, RJ, TDM), USB1.x/2.0, SATA | | High Speed Serial Protocol Trigger | Data Rates | (Option HDO9K-80B-8B10B TD) 150 Mb/s - 3.125 Gb/s | Pattern Length | 80 bits, NRZ or 8b10b | Clock Recovery Jitter | 1 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density | Hardware Clock Recovery Loop BW | PLL Loop BW = Fbaud/5500, 100 Mb/s to 2.488 Gb/s (typical) | | Measurement Tools | Measurement Functionality | Display up to 12 measurement parameters together with statistics, including mean, minimum, maximum, standard deviation, and total number. Each occurrence of each parameter is measured and added to the statistics table. Histicons provide a fast, dynamic view of parameters and waveshape characteristics. Parameter math allows addition, subtraction, multiplication, or division of two different parameters. Parameter gates define the location for measurement on the source waveform. | Measurement Parameters - Horizontal | Bit rate, Cycles, Delay, Delta Delay, Duty Cycle, Duration, Frequency, First, Last, Narrow band phase, Narrow band power, Number of points, Period, Width, Phase, Time @ minimum (min.), Time @ maximum (max.), Delta time @ level, Delta time @ level from trigger, X @ max., X @ min.
Cycle-Cycle Jitter, N-Cycle, N-Cycle with start selection, Frequency @ level, Period @ level, Half Period, Width @ level, Time Interval Error @ level, Setup, Hold, Skew, Duty Cycle @ level, Duty Cycle Error, Edge @ lv (counts edges) | Measurement Parameters - Vertical | Amplitude, Base (Low), Level @ x, Maximum, Mean, Median, Minimum, Peak-to-peak, RMS, Std. deviation, Top | Measurement Parameters - Pulse | Area, Fall time (90-10%, 80-20%, @ level), + Overshoot, - Overshoot, Risetime (10-90%, 20-80%, @ level), | | Math Tools | Math Functionality | Display up to 12 math functions traces (F1-F12). The easy-to-use graphical interface simplifies setup of up to two operations on each function trace, and function traces can be chained together to perform math-on-math. | Math Operators - Basic Math | Average (summed), Average (continuous), Difference (-), Envelope, Floor, Product (x), Roof, Sum (+) | Math Operators - Filters | Enhanced resolution (to 11 bits vertical), Interpolate (cubic, quadratic, sinx/x), (SINx)/x | Math Operators - Frequency Analysis | FFT (power spectrum, magnitude, phase, power density, real, imaginary, magnitude squared, up to 128 Mpts and rectangular, VonHann, Hamming, FlatTop and Blackman Harris windows) | Math Operators - Functions | Absolute value, Correlation (two waveforms), Derivative, Deskew (resample), Exp (base e), Exp (base 10), Integral,Invert (negate), Log (base e), Log (base 10), Reciprocal, Rescale (with units), Square, Square root, Zoom (identity) | Math Operators - Other | Sparse | | Measurement and Math Integration | Measurement and Math Integration | Histograms to display statistical distributions of up to 2 billion measurement parameters. Trend (datalog) of up to 1 million measurement parameters. Track (display parameter vs. time, time-correlated to acquisitions) any parameter. Persistence histogram and persistence trace (mean, range, sigma) | | Pass/Fail Testing | Test Types | Parameter limit testing, mask testing. Pass/Fail Actions include: Save, Stop, Alarm, Pulse, Hardcopy, LabNotebook | | Display System | Size | Color 15.4" widescreen capacitive touch screen | Resolution | WXGA; 1280 x 800 pixels. | Number of traces | Display a maximum of 16 traces. Simultaneously display channel, zoom, memory and math traces. | Grid Styles | Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y, Tandem, Quatro, Twelve, Sixteen | Waveform Representation | Sample dots joined, or sample dots only | | Integrated Second Display | Size | Supports touch screen integration of user-supplied second display with split-grid capability. (Note: touch screen driver for second display may not be a Fujitsu driver) | | Persistence Display | Analog and Color-Graded Persistence | Variable saturation levels; stores each trace's persistence data in memory | Persistence Types | Select analog, color, or three-dimensional | Trace Selection | Activate persistence on all or any combination of traces | Persistence Aging | Select from 500 ms to infinity | Sweep Display Modes | All accumulated, or all accumulated with last trace highlighted | | Zoom Expansion Traces | Zoom Expansion Traces | Display up to 12 Zoom and 12 Math/Zoom traces | | Internal Waveform Memory | Internal Waveform Memory | 4 active waveform memory traces (M1-M4) store 16 bit/point full length waveforms. Waveforms can be stored to any number of files limited only by the data storage media capacity. | | Setup Storage | Setup Storage | Store to the internal hard drive, over the network, or to a USB-connected peripheral device. | | Automatic Setup | Auto Setup | Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals | Find Vertical Scale | Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range | | Calibration | Auto Calibration | Ensures specified DC and timing accuracy is maintained for 1 year minimum. | | Processor/CPU | Type | IntelR i5-3610 Dual Core, 2.7 GHz (or better) | Processor Memory | 16 GB standard | Operating System | Microsoft WindowsR 7 Pro 64 bit Embedded | Real Time Clock | Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks. | | Connectivity | Ethernet Port | Supports 10/100/1000BaseT Ethernet interface (RJ45 port) | USB Host Ports | 4 side USB 3.1 Gen1 ports, 2 side USB 2.0 ports, and 1 front USB 2.0 port support Windows compatible devices | USB Device Port | 1 port - USBTMC over USB 3.1 Gen1 | GPIB Port (optional) | Supports IEEE - 488.2 (External) | External Monitor Port | DisplayPort 1.1 (Qty. 2) and DVI-D (Qty. 1) to support customer-supplied external monitor. Includes support for extended desktop operation with WQXGA (2560 x 1600) pixel resolution and split-grid capability on external monitor. Supports touch screen integration of external monitor (Note: external display can not use a Fujitsu touch-screen driver). | Remote Control | Via Windows Automation, or via LeCroy Remote Command Set | Network Communication Standard | VXI-11 or VICP, LXI Class C (v1.2) Compliant | Peripheral Bus | Teldyne LeCroy LBUS standard | | Auxiliary Input | Signal Types | Select External Trigger or External Clock Input on the front panel | Coupling | 50 Ω: DC; 1 MΩ: AC, DC, GND | Max. Input Voltage | 50 Ω: 5 Vrms; 1 MΩ: 250 Vmax (DC + Peak AC ≦ 10 kHz) | | Auxiliary Output | Signal Types | Select from control signals or Off | Output Signal | 500 Hz-1 MHz square wave or DC level; 50 mV-1 V into 1 MΩ | Control Signals | Trigger enabled, trigger out, pass/fail status, fast edge, off | Connector Type | BNC, located on front | | Probes | Probes
| Qty. (4) ÷10 Passive Probes | Probe System | ProBus. Automatically detects and supports a variety of compatible probes | Scale Factors | Automatically or manually selected depending on probe used | Calibration Output | Default is 1kHz square wave, 1Vp-p (typical), output to probe hook. Settable from 500 Hz to 1 MHz square wave; 50 mV to 1.0V. | | Power Requirements | Voltage | 100-240 VAC ±10% at 50/60 Hz ±5%; 110-120 VAC ±10% at 400 Hz ±5%; Automatic AC Voltage Selection | Nominal Power Consumption | 415 W / 415 VA | Max. Power Consumption | 500 W / 500 VA (with all PC peripherals and active probes connected to 4 channels) | | Environmental | Temperature (Operating) | +5 °C to +40 °C | Temperature (Non-Operating) | -20 °C to +60 °C | Humidity (Operating) | 5% to 90% relative humidity (non-condensing) up to +31 °C. Upper limit derates to 50% relative humidity (non-condensing) at +40 °C. | Humidity (Non-Operating) | 5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F | Altitude (Operating) | Up to 3,000 m at or below +30 °C | Altitude (Non-Operating) | Up to 40,000 ft. (12,192 m) | Random Vibration (Operating) | 0.31 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes | Random Vibration (Non-Operating) | 2.4 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes | Functional Shock | 30 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total | | Size and Weight | Dimensions (HWD) | 12.44"H x 16.42"W x 9.37"D (316 x 417 x 238 mm) | Weight | 22.8 lbs. (10.3 kg) | Shipping Weight | 42 lbs. (19.0 kg) | | Certifications | CE Certification UL and cUL Listing | CE Compliant, UL and cUL listed; conforms to UL 61010-1 (3rd Edition), UL 61010-2-030 (1st Edition) CAN/CSA C22.2 No. 61010-1-12 | | Warranty and Service | Warranty and Service | 3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, and calibration services. | |
HDO9204 スペック
Vertical - Analog Channels | Analog Bandwidth (Max) | 2 GHz | Analog Bandwidth @ 50 Ω (-3 dB) (ProBus Input) | 2 GHz (≧ 5 mV/div) | Analog Bandwidth @ 1 MΩ (-3 dB) (ProBus Input) | 1 GHz (typical) | Rise Time (10-90%, 50 Ω) | 200 ps (typical) | Rise Time (20-80%, 50 Ω) | 146 ps (typical) | Input Channels | 4 | Vertical Resolution | 10 bits, up to 13.8 bits with Optimized Filtering | Effective Number of Bits (ENOB) | 7.4 bits (typical) | Vertical Noise Floor (1 mV/div) | 160 uV | Vertical Noise Floor (2 mV/div) | 160 uV | Vertical Noise Floor (5 mV/div) | 225 uV | Vertical Noise Floor (10 mV/div) | 239 uV | Vertical Noise Floor (50 mV/div) | 600 uV | Vertical Noise Floor (100 mV/div) | 1.05 mV | Vertical Noise Floor (200 mV/div) | 3.64 mV | Vertical Noise Floor (500 mV/div) | 5.98 mV | Vertical Noise Floor (1 V/div) | 10.8 mV | Sensitivity | 50 Ω: 1 mV-1 V/div, fully variable; 1 MΩ: 1 mV-10 V/div, fully variable | DC Vertical Gain Accuracy (Gain Component of DC Accuracy) | ±(1%) F.S, offset at 0 V | Channel-Channel Isolation | DC up to rated BW: 40 dB (>100:1), (For any two ProBus input channels, same v/div settings, typical) | Offset Range | 50 Ω BWL≦1 GHz ±1.6 V @ 1 mV - 4.95 mV/div ±4 V @ 5 mV - 9.9 mV/div ±8 V @ 10 mV - 19.8 mV/div ±10 V @ 20 mV - 1V/div BWL>1GHz ±1.4V @ 5 mV - 100 mV/div ±10V @ 102 mV - 1 V/div
1 MΩ ±1.6 V @ 1 mV - 4.95 mV/div ±4 V @ 5 mV - 9.9 mV/div ±8 V @ 10 mV - 19.8 mV/div ±16 V @ 20 mV - 100 mV/div ±80 V @ 102 mV - 1.0 V/div ±160 V @ 1.02 V - 10 V/div | DC Vertical Offset Accuracy | ±(1.5% of offset setting +1% of full scale + 1 mV) (test limit) | Maximum Input Voltage | 50 Ω: 5V RMS ± 10V peak 1 MΩ: 400 V max. (DC + peak AC < 10 kHz) | Input Coupling | 1 MΩ: AC, DC, GND; 50 Ω: DC, GND | Input Impedance | 50 Ω+/-2% or 1 MΩ||17pF, 10 MΩ || 9.5 pF with supplied Probe | Bandwidth Limiters | 20MHz, 200MHz, 500 MHz, 1GHz | | Horizontal - Analog Channels | Timebases | Internal timebase common to 4 input channels; an external clock may be applied at the EXT input | Time/Division Range | HD1024 on: 20 ps/div - 500 μs/div HD1024 off: 20 ps/div - 6.4 ks/div; RIS available at ≦ 10 ns/div; Roll Mode available at ≧ 100 ms/div and ≦ 5 MS/s | Clock Accuracy | <=1.5 ppm +(aging of 0.5 ppm/yr from last calibration) | Channel-Channel Deskew Range | ±9 x time/div. setting, each channel | External Timebase Reference (Input) | 10MHz +/-25ppm into 50 ohms | External Timebase Reference (Output) | 10MHz, 3.5 dBm +/-1dBm, syncronized to reference being used (internal or external reference) | External Clock | DC to 100 MHz; (50 Ω/1 MΩ), EXT BNC input, Minimum rise time and amplitude requirements apply at low frequencies. | | Acquisition - Analog Channels | Sample Rate (Single-shot) | 20 GS/s on 4 Ch 40 GS/s on 2 Ch | Sample Rate (Repetitive) | 200 GS/s for repetitive signals (20 ps/div to 10 ns/div) | Memory Length (4 Ch / 2 Ch / 1Ch) (Number of Segments) | 64M / 128M / 128M (15,000) | Intersegment Time | 1 μs | Averaging | Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps | Envelope (Extrema) | Envelope, floor, or roof for up to 1 million sweeps | Interpolation | Linear or Sin x/x (2 pt and 4 pt); automatically set when HD1024 is enabled | | Triggering System | Modes | Normal, Auto, Single, and Stop | Sources | Any input channel, Ext, Ext/10, or line; slope and level unique to each source (except line trigger) | Coupling | DC, AC, HFRej, LFRej | Pre-trigger Delay | 0-100% of memory size (adjustable in 1% increments of 100 ns) | Post-trigger Delay | 0-10,000 Divisions in real time mode, limited at slower time/div settings or in roll mode | Trigger Sensitivity with Edge Trigger ProBus Inputs | 2 div @ < 2 GHz 1.5 div @< 1 GHz 1 div @ < 200 MHz 0.9 div @<10 MHz (DC, AC, and LFRej coupling, ≧ 10 mV/div, 50 Ω) | External Trigger Sensitivity, (Edge Trigger) | 2 div @ 1 GHz 1.5 div @ < 500 MHz 1 div @ <200 MHz 0.9 div @<10 MHz (DC, AC, and LFRej coupling) | Hold-off | From 2 ns up to 20 s or from 1 to 99,999,999 events | Internal Trigger Level Range | ±4.1 div from center (typical) | External Trigger Level Range | Ext (±0.4 V); Ext/10 (±4 V) | Maximum Trigger Rate | 1,000,000 waveforms/second (in Sequence Mode, up to 4 channels) | Max Trigger Frequency (C1-C4, Aux In, SMART Trigger) | 2.0 GHz @ ≧ 10 mV/div (minimum triggerable width 200 ps) | | Trigger Types | Edge | Triggers when signal meets slope (positive, negative, or either) and level condition. | Width | Triggers on positive or negative glitches with selectable widths. Minimum width 500 ps, maximum width: 20 s | Glitch | Triggers on positive or negative glitches with selectable widths. Minimum width 200 ps, maximum width: 20 s | Window | Triggers when signal exits a window defined by adjustable thresholds | Pattern | Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don't care. The High and Low level can be selected independently. Triggers at start or end of the pattern. | TV-Composite Video | Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative). | Runt | Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns. | Slew Rate | Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns. | Interval | Triggers on intervals selectable between 1 ns and 20 s. | Dropout | Triggers if signal drops out for longer than selected time between 1 ns and 20 s. | Exclusion Triggering | Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met | Measurement Trigger | Select from a large number of measurement parameters trigger on a measurement value with qualified limits. Can be used as only trigger or last event in a Cascade Trigger. | Multi-Stage: Qualified | Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events. | Multi-Stage: Qualified First | In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events. | Multi-Stage: Cascade (Sequence) Trigger, Capability | Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. | Multi-Stage: Cascade (Sequence) Trigger, Types | Cascade A then B: Edge, Window, Pattern (Logic) Width, Glitch, Interval, Dropout, or Measurement. Measurement can be on Stage B only. Cascade A then B then C (Measurement): Edge, Window, Pattern (Logic), Width, Glitch, Interval, Dropout, or Measurement. Measurement can be on Stage C only. Cascade A then B then C: Edge, Window, Pattern (Logic) | Multi-Stage: Cascade (Sequence) Trigger, Holdoff | Holdoff between A and B or B and C is selectable by time (1ns to 20s) or number of events. Measurement trigger selection as the last stage in a Cascade precludes a holdoff setting between the prior stage and the last stage. | | Low Speed Serial Protocol Trigger (Optional) | Optionally available | I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN1.1, CAN2.0, CAN FD, LIN, FlexRay, MIL-STD-1553, AudioBus (I2S, LJ, RJ, TDM), USB1.x/2.0, SATA | | High Speed Serial Protocol Trigger | Data Rates | (Option HDO9K-80B-8B10B TD) 150 Mb/s - 3.125 Gb/s | Pattern Length | 80 bits, NRZ or 8b10b | Clock Recovery Jitter | 1 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density | Hardware Clock Recovery Loop BW | PLL Loop BW = Fbaud/5500, 100 Mb/s to 2.488 Gb/s (typical) | | Measurement Tools | Measurement Functionality | Display up to 12 measurement parameters together with statistics, including mean, minimum, maximum, standard deviation, and total number. Each occurrence of each parameter is measured and added to the statistics table. Histicons provide a fast, dynamic view of parameters and waveshape characteristics. Parameter math allows addition, subtraction, multiplication, or division of two different parameters. Parameter gates define the location for measurement on the source waveform. | Measurement Parameters - Horizontal | Bit rate, Cycles, Delay, Delta Delay, Duty Cycle, Duration, Frequency, First, Last, Narrow band phase, Narrow band power, Number of points, Period, Width, Phase, Time @ minimum (min.), Time @ maximum (max.), Delta time @ level, Delta time @ level from trigger, X @ max., X @ min.
Cycle-Cycle Jitter, N-Cycle, N-Cycle with start selection, Frequency @ level, Period @ level, Half Period, Width @ level, Time Interval Error @ level, Setup, Hold, Skew, Duty Cycle @ level, Duty Cycle Error, Edge @ lv (counts edges) | Measurement Parameters - Vertical | Amplitude, Base (Low), Level @ x, Maximum, Mean, Median, Minimum, Peak-to-peak, RMS, Std. deviation, Top | Measurement Parameters - Pulse | Area, Fall time (90-10%, 80-20%, @ level), + Overshoot, - Overshoot, Risetime (10-90%, 20-80%, @ level), | Measurement Parameters | Amplitude, Area, Base (Low), Bit rate, Cycles, Delay, Delta Delay, Duty Cycle, Duration, Fall time (90-10%, 80-20%, @ level), Frequency, First, Last, Level @ x, Maximum, Mean, Median, Minimum, Narrow band phase, Narrow band power, Number of points, + Overshoot, - Overshoot, Peak-to-peak, Period, Risetime (10-90%, 20-80%, @ level), RMS, Std. deviation, Top, Width, Phase, Time @ minimum (min.), Time @ maximum (max.), Delta time @ level, Delta time @ level from trigger, X @ max., X @ min.
Cycle-Cycle Jitter, N-Cycle, N-Cycle with start selection, Frequency @ level, Period @ level, Half Period, Width @ level, Time Interval Error @ level, Setup, Hold, Skew, Duty Cycle @ level, Duty Cycle Error, Edge @ lv (counts edges) | | Math Tools | Math Functionality | Display up to 12 math functions traces (F1-F12). The easy-to-use graphical interface simplifies setup of up to two operations on each function trace, and function traces can be chained together to perform math-on-math. | Math Operators - Basic Math | Average (summed), Average (continuous), Difference (-), Envelope, Floor, Product (x), Roof, Sum (+) | Math Operators - Filters | Enhanced resolution (to 11 bits vertical), Interpolate (cubic, quadratic, sinx/x), (SINx)/x | Math Operators - Frequency Analysis | FFT (power spectrum, magnitude, phase, power density, real, imaginary, magnitude squared, up to 128 Mpts and rectangular, VonHann, Hamming, FlatTop and Blackman Harris windows) | Math Operators - Functions | Absolute value, Correlation (two waveforms), Derivative, Deskew (resample), Exp (base e), Exp (base 10), Integral,Invert (negate), Log (base e), Log (base 10), Reciprocal, Rescale (with units), Square, Square root, Zoom (identity) | Math Operators - Other | Sparse | | Measurement and Math Integration | Measurement and Math Integration | Histograms to display statistical distributions of up to 2 billion measurement parameters. Trend (datalog) of up to 1 million measurement parameters. Track (display parameter vs. time, time-correlated to acquisitions) any parameter. Persistence histogram and persistence trace (mean, range, sigma) | | Pass/Fail Testing | Test Types | Parameter limit testing, mask testing. Pass/Fail Actions include: Save, Stop, Alarm, Pulse, Hardcopy, LabNotebook | | Display System | Size | Color 15.4" widescreen capacitive touch screen | Resolution | WXGA; 1280 x 800 pixels. | Number of traces | Display a maximum of 16 traces. Simultaneously display channel, zoom, memory and math traces. | Grid Styles | Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y, Tandem, Quatro, Twelve, Sixteen | Waveform Representation | Sample dots joined, or sample dots only | | Integrated Second Display | Size | Supports touch screen integration of user-supplied second display with split-grid capability. (Note: touch screen driver for second display may not be a Fujitsu driver) | Type | Supports touch screen integration of user-supplied second display with split-grid capability. (Note: touch screen driver for second display may not be a Fujitsu driver) | | Persistence Display | Analog and Color-Graded Persistence | Variable saturation levels; stores each trace's persistence data in memory | Persistence Types | Select analog, color, or three-dimensional | Trace Selection | Activate persistence on all or any combination of traces | Persistence Aging | Select from 500 ms to infinity | Sweep Display Modes | All accumulated, or all accumulated with last trace highlighted | | Zoom Expansion Traces | Zoom Expansion Traces | Display up to 12 Zoom and 12 Math/Zoom traces | | Internal Waveform Memory | Internal Waveform Memory | 12 active waveform memory traces (M1-M12) store 16 bit/point full length waveforms. Waveforms can be stored to any number of files limited only by the data storage media capacity. | | Setup Storage | Setup Storage | Store to the internal hard drive, over the network, or to a USB-connected peripheral device. | | Automatic Setup | Auto Setup | Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals | Find Vertical Scale | Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range | | Calibration | Auto Calibration | Ensures specified DC and timing accuracy is maintained for 1 year minimum. | | Processor/CPU | Type | IntelR i5-3610 Dual Core, 2.7 GHz (or better) | Processor Memory | 16 GB standard | Operating System | Microsoft WindowsR 7 For Embedded Systems 64Bits | Real Time Clock | Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks. | | Connectivity | Ethernet Port | Supports 10/100/1000BaseT Ethernet interface (RJ45 port) | USB Host Ports | 4 side USB 3.1 Gen1 ports, 2 side USB 2.0 ports, and 1 front USB 2.0 port support Windows compatible devices | USB Device Port | 1 port - USBTMC over USB 3.1 Gen1 | GPIB Port (optional) | Supports IEEE - 488.2 (External) | External Monitor Port | DisplayPort 1.1 (Qty. 2) and DVI-D (Qty. 1) to support customer-supplied external monitor. Includes support for extended desktop operation with WQXGA (2560 x 1600) pixel resolution and split-grid capability on external monitor. Supports touch screen integration of external monitor (Note: external display can not use a Fujitsu touch-screen driver). | Remote Control | Via Windows Automation, or via LeCroy Remote Command Set | Network Communication Standard | VXI-11 or VICP, LXI Class C (v1.2) Compliant | Peripheral Bus | Teldyne LeCroy LBUS standard | | Auxiliary Input | Signal Types | Select External Trigger or External Clock Input on the front panel | Coupling | 50 Ω: DC; 1 MΩ: AC, DC, GND | Max. Input Voltage | 50 Ω: 5 Vrms; 1 MΩ: 250 Vmax (DC + Peak AC ≦ 10 kHz) | | Auxiliary Output | Signal Types | Select from control signals or Off | Output Signal | 500 Hz-1 MHz square wave or DC level; 50 mV-1 V into 1 MΩ | Control Signals | Trigger enabled, trigger out, pass/fail status, fast edge, off | Connector Type | BNC, located on front | | Probes | Probes
| Qty. (4) ÷10 Passive Probes | Probe System | ProBus. Automatically detects and supports a variety of compatible probes | Scale Factors | Automatically or manually selected depending on probe used | Calibration Output | Default is 1kHz square wave, 1Vp-p (typical), output to probe hook. Settable from 500 Hz to 1 MHz square wave; 50 mV to 1.0V. | | Power Requirements | Voltage | 100-240 VAC ±10% at 50/60 Hz ±5%; 110-120 VAC ±10% at 400 Hz ±5%; Automatic AC Voltage Selection | Nominal Power Consumption | 415 W / 415 VA | Max. Power Consumption | 500 W / 500 VA (with all PC peripherals and active probes connected to 4 channels) | | Environmental | Temperature (Operating) | +5 °C to +40 °C | Temperature (Non-Operating) | -20 °C to +60 °C | Humidity (Operating) | 5% to 90% relative humidity (non-condensing) up to +31 °C. Upper limit derates to 50% relative humidity (non-condensing) at +40 °C. | Humidity (Non-Operating) | 5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F | Altitude (Operating) | Up to 3,000 m at or below +30 °C | Altitude (Non-Operating) | Up to 40,000 ft. (12,192 m) | Random Vibration (Operating) | 0.31 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes | Random Vibration (Non-Operating) | 2.4 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes | Functional Shock | 30 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total | | Size and Weight | Dimensions (HWD) | 14.1" H x 17.5" W x 9.5" D (358 x 445 x 242 mm) | Weight | 25.8 lbs. (11.7 kg) | Shipping Weight | 42 lbs. (19.0 kg) | | Certifications | CE Certification UL and cUL Listing | CE Compliant, UL and cUL listed; conforms to UL 61010-1 (3rd Edition), UL 61010-2-030 (1st Edition) CAN/CSA C22.2 No. 61010-1-12 | | Warranty and Service | Warranty and Service | 3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, and calibration services. | |
HDO9304 スペック
Vertical - Analog Channels | Analog Bandwidth (Max) | 3 GHz | Analog Bandwidth @ 50 Ω (-3 dB) (ProBus Input) | 3 GHz (≧ 5 mV/div) | Analog Bandwidth @ 1 MΩ (-3 dB) (ProBus Input) | 1 GHz (typical) | Rise Time (10-90%, 50 Ω) | 134 ps (typical) | Rise Time (20-80%, 50 Ω) | 98 ps (typical) | Input Channels | 4 | Vertical Resolution | 10 bits, up to 13.8 bits with Optimized Filtering | Effective Number of Bits (ENOB) | 7.0 bits (typical) | Vertical Noise Floor (1 mV/div) | 160 uV | Vertical Noise Floor (2 mV/div) | 160 uV | Vertical Noise Floor (5 mV/div) | 280 uV | Vertical Noise Floor (10 mV/div) | 295 uV | Vertical Noise Floor (50 mV/div) | 743 uV | Vertical Noise Floor (100 mV/div) | 1.28 mV | Vertical Noise Floor (200 mV/div) | 4.53 mV | Vertical Noise Floor (500 mV/div) | 7.36 mV | Vertical Noise Floor (1 V/div) | 13.1 mV | Sensitivity | 50 Ω: 1 mV-1 V/div, fully variable; 1 MΩ: 1 mV-10 V/div, fully variable | DC Vertical Gain Accuracy (Gain Component of DC Accuracy) | ±(1%) F.S, offset at 0 V | Channel-Channel Isolation | DC -2.5 GHz: 40 dB (>100:1), 2.5 GHz to rated BW: 31.6 dB (>30:1) (For any two ProBus input channels, same v/div settings, typical) | Offset Range | 50 Ω BWL≦1 GHz ±1.6 V @ 1 mV - 4.95 mV/div ±4 V @ 5 mV - 9.9 mV/div ±8 V @ 10 mV - 19.8 mV/div ±10 V @ 20 mV - 1V/div BWL>1GHz ±1.4V @ 5 mV - 100 mV/div ±10V @ 102 mV - 1 V/div
1 MΩ ±1.6 V @ 1 mV - 4.95 mV/div ±4 V @ 5 mV - 9.9 mV/div ±8 V @ 10 mV - 19.8 mV/div ±16 V @ 20 mV - 100 mV/div ±80 V @ 102 mV - 1.0 V/div ±160 V @ 1.02 V - 10 V/div | DC Vertical Offset Accuracy | ±(1.5% of offset setting +1% of full scale + 1 mV) (test limit) | Maximum Input Voltage | 50 Ω: 5V RMS ± 10V peak 1 MΩ: 400 V max. (DC + peak AC < 10 kHz) | Input Coupling | 1 MΩ: AC, DC, GND; 50 Ω: DC, GND | Input Impedance | 50 Ω+/-2% or 1 MΩ||17pF, 10 MΩ || 9.5 pF with supplied Probe | Bandwidth Limiters | 20MHz, 200MHz, 500 MHz, 1GHz, 2 GHz | | Horizontal - Analog Channels | Timebases | Internal timebase common to 4 input channels; an external clock may be applied at the EXT input | Time/Division Range | HD1024 on: 20 ps/div - 500 μs/div HD1024 off: 20 ps/div - 6.4 ks/div; RIS available at ≦ 10 ns/div; Roll Mode available at ≧ 100 ms/div and ≦ 5 MS/s | Clock Accuracy | <=1.5 ppm +(aging of 0.5 ppm/yr from last calibration) | Channel-Channel Deskew Range | ±9 x time/div. setting, each channel | External Timebase Reference (Input) | 10MHz +/-25ppm into 50 ohms | External Timebase Reference (Output) | 10MHz, 3.5 dBm +/-1dBm, syncronized to reference being used (internal or external reference) | External Clock | DC to 100 MHz; (50 Ω/1 MΩ), EXT BNC input, Minimum rise time and amplitude requirements apply at low frequencies. | | Acquisition - Analog Channels | Sample Rate (Single-shot) | 20 GS/s on 4 Ch 40 GS/s on 2 Ch | Sample Rate (Repetitive) | 200 GS/s for repetitive signals (20 ps/div to 10 ns/div) | Memory Length (4 Ch / 2 Ch / 1Ch) (Number of Segments) | 64M / 128M / 128M (15,000) | Intersegment Time | 1 μs | Averaging | Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps | Envelope (Extrema) | Envelope, floor, or roof for up to 1 million sweeps | Interpolation | Linear or Sin x/x (2 pt and 4 pt); automatically set when HD1024 is enabled | | Triggering System | Modes | Normal, Auto, Single, and Stop | Sources | Any input channel, Ext, Ext/10, or line; slope and level unique to each source (except line trigger) | Coupling | DC, AC, HFRej, LFRej | Pre-trigger Delay | 0-100% of memory size (adjustable in 1% increments of 100 ns) | Post-trigger Delay | 0-10,000 Divisions in real time mode, limited at slower time/div settings or in roll mode | Trigger Sensitivity with Edge Trigger ProBus Inputs | 2 div @ < 3 GHz 1.5 div @< 1.5 GHz 1 div @ < 200 MHz 0.9 div @<10 MHz (DC, AC, and LFRej coupling, ≧ 10 mV/div, 50 Ω) | External Trigger Sensitivity, (Edge Trigger) | 2 div @ 1 GHz 1.5 div @ < 500 MHz 1 div @ <200 MHz 0.9 div @<10 MHz (DC, AC, and LFRej coupling) | Hold-off | From 2 ns up to 20 s or from 1 to 99,999,999 events | Internal Trigger Level Range | ±4.1 div from center (typical) | External Trigger Level Range | Ext (±0.4 V); Ext/10 (±4 V) | Maximum Trigger Rate | 1,000,000 waveforms/second (in Sequence Mode, up to 4 channels) | Max Trigger Frequency (C1-C4, Aux In, SMART Trigger) | 2.0 GHz @ ≧ 10 mV/div (minimum triggerable width 270 ps) | | Trigger Types | Edge | Triggers when signal meets slope (positive, negative, or either) and level condition. | Width | Triggers on positive or negative glitches with selectable widths. Minimum width 500 ps, maximum width: 20 s | Glitch | Triggers on positive or negative glitches with selectable widths. Minimum width 200 ps, maximum width: 20 s | Window | Triggers when signal exits a window defined by adjustable thresholds | Pattern | Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don't care. The High and Low level can be selected independently. Triggers at start or end of the pattern. | TV-Composite Video | Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative). | Runt | Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns. | Slew Rate | Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns. | Interval | Triggers on intervals selectable between 1 ns and 20 s. | Dropout | Triggers if signal drops out for longer than selected time between 1 ns and 20 s. | Exclusion Triggering | Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met | Measurement Trigger | Select from a large number of measurement parameters trigger on a measurement value with qualified limits. Can be used as only trigger or last event in a Cascade Trigger. | Multi-Stage: Qualified | Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events. | Multi-Stage: Qualified First | In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events. | Multi-Stage: Cascade (Sequence) Trigger, Capability | Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. | Multi-Stage: Cascade (Sequence) Trigger, Types | Cascade A then B: Edge, Window, Pattern (Logic) Width, Glitch, Interval, Dropout, or Measurement. Measurement can be on Stage B only. Cascade A then B then C (Measurement): Edge, Window, Pattern (Logic), Width, Glitch, Interval, Dropout, or Measurement. Measurement can be on Stage C only. Cascade A then B then C: Edge, Window, Pattern (Logic) | Multi-Stage: Cascade (Sequence) Trigger, Holdoff | Holdoff between A and B or B and C is selectable by time (1ns to 20s) or number of events. Measurement trigger selection as the last stage in a Cascade precludes a holdoff setting between the prior stage and the last stage. | | Low Speed Serial Protocol Trigger (Optional) | Optionally available | I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN1.1, CAN2.0, CAN FD, LIN, FlexRay, MIL-STD-1553, AudioBus (I2S, LJ, RJ, TDM), USB1.x/2.0, SATA | | High Speed Serial Protocol Trigger | Data Rates | (Option HDO9K-80B-8B10B TD) 150 Mb/s - 3.125 Gb/s | Pattern Length | 80 bits, NRZ or 8b10b | Clock Recovery Jitter | 1 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density | Hardware Clock Recovery Loop BW | PLL Loop BW = Fbaud/5500, 100 Mb/s to 2.488 Gb/s (typical) | | Measurement Tools | Measurement Functionality | Display up to 12 measurement parameters together with statistics, including mean, minimum, maximum, standard deviation, and total number. Each occurrence of each parameter is measured and added to the statistics table. Histicons provide a fast, dynamic view of parameters and waveshape characteristics. Parameter math allows addition, subtraction, multiplication, or division of two different parameters. Parameter gates define the location for measurement on the source waveform. | Measurement Parameters - Horizontal | Bit rate, Cycles, Delay, Delta Delay, Duty Cycle, Duration, Frequency, First, Last, Narrow band phase, Narrow band power, Number of points, Period, Width, Phase, Time @ minimum (min.), Time @ maximum (max.), Delta time @ level, Delta time @ level from trigger, X @ max., X @ min.
Cycle-Cycle Jitter, N-Cycle, N-Cycle with start selection, Frequency @ level, Period @ level, Half Period, Width @ level, Time Interval Error @ level, Setup, Hold, Skew, Duty Cycle @ level, Duty Cycle Error, Edge @ lv (counts edges) | Measurement Parameters - Vertical | Amplitude, Base (Low), Level @ x, Maximum, Mean, Median, Minimum, Peak-to-peak, RMS, Std. deviation, Top | Measurement Parameters - Pulse | Area, Fall time (90-10%, 80-20%, @ level), + Overshoot, - Overshoot, Risetime (10-90%, 20-80%, @ level), | Measurement Parameters | Amplitude, Area, Base (Low), Bit rate, Cycles, Delay, Delta Delay, Duty Cycle, Duration, Fall time (90-10%, 80-20%, @ level), Frequency, First, Last, Level @ x, Maximum, Mean, Median, Minimum, Narrow band phase, Narrow band power, Number of points, + Overshoot, - Overshoot, Peak-to-peak, Period, Risetime (10-90%, 20-80%, @ level), RMS, Std. deviation, Top, Width, Phase, Time @ minimum (min.), Time @ maximum (max.), Delta time @ level, Delta time @ level from trigger, X @ max., X @ min.
Cycle-Cycle Jitter, N-Cycle, N-Cycle with start selection, Frequency @ level, Period @ level, Half Period, Width @ level, Time Interval Error @ level, Setup, Hold, Skew, Duty Cycle @ level, Duty Cycle Error, Edge @ lv (counts edges) | | Math Tools | Math Functionality | Display up to 12 math functions traces (F1-F12). The easy-to-use graphical interface simplifies setup of up to two operations on each function trace, and function traces can be chained together to perform math-on-math. | Math Operators - Basic Math | Average (summed), Average (continuous), Difference (-), Envelope, Floor, Product (x), Roof, Sum (+) | Math Operators - Filters | Enhanced resolution (to 11 bits vertical), Interpolate (cubic, quadratic, sinx/x), (SINx)/x | Math Operators - Frequency Analysis | FFT (power spectrum, magnitude, phase, power density, real, imaginary, magnitude squared, up to 128 Mpts and rectangular, VonHann, Hamming, FlatTop and Blackman Harris windows) | Math Operators - Functions | Absolute value, Correlation (two waveforms), Derivative, Deskew (resample), Exp (base e), Exp (base 10), Integral,Invert (negate), Log (base e), Log (base 10), Reciprocal, Rescale (with units), Square, Square root, Zoom (identity) | Math Operators - Other | Sparse | | Measurement and Math Integration | Measurement and Math Integration | Histograms to display statistical distributions of up to 2 billion measurement parameters. Trend (datalog) of up to 1 million measurement parameters. Track (display parameter vs. time, time-correlated to acquisitions) any parameter. Persistence histogram and persistence trace (mean, range, sigma) | | Pass/Fail Testing | Test Types | Parameter limit testing, mask testing. Pass/Fail Actions include: Save, Stop, Alarm, Pulse, Hardcopy, LabNotebook | | Display System | Size | Color 15.4" widescreen capacitive touch screen | Resolution | WXGA; 1280 x 800 pixels. | Number of traces | Display a maximum of 16 traces. Simultaneously display channel, zoom, memory and math traces. | Grid Styles | Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y, Tandem, Quatro, Twelve, Sixteen | Waveform Representation | Sample dots joined, or sample dots only | | Integrated Second Display | Size | Supports touch screen integration of user-supplied second display with split-grid capability. (Note: touch screen driver for second display may not be a Fujitsu driver) | Type | Supports touch screen integration of user-supplied second display with split-grid capability. (Note: touch screen driver for second display may not be a Fujitsu driver) | | Persistence Display | Analog and Color-Graded Persistence | Variable saturation levels; stores each trace's persistence data in memory | Persistence Types | Select analog, color, or three-dimensional | Trace Selection | Activate persistence on all or any combination of traces | Persistence Aging | Select from 500 ms to infinity | Sweep Display Modes | All accumulated, or all accumulated with last trace highlighted | | Zoom Expansion Traces | Zoom Expansion Traces | Display up to 12 Zoom and 12 Math/Zoom traces | | Internal Waveform Memory | Internal Waveform Memory | 12 active waveform memory traces (M1-M12) store 16 bit/point full length waveforms. Waveforms can be stored to any number of files limited only by the data storage media capacity. | | Setup Storage | Setup Storage | Store to the internal hard drive, over the network, or to a USB-connected peripheral device. | | Automatic Setup | Auto Setup | Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals | Find Vertical Scale | Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range | | Calibration | Auto Calibration | Ensures specified DC and timing accuracy is maintained for 1 year minimum. | | Processor/CPU | Type | IntelR i5-3610 Dual Core, 2.7 GHz (or better) | Processor Memory | 16 GB standard | Operating System | Microsoft WindowsR 7 For Embedded Systems 64Bits | Real Time Clock | Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks. | | Connectivity | Ethernet Port | Supports 10/100/1000BaseT Ethernet interface (RJ45 port) | USB Host Ports | 4 side USB 3.1 Gen1 ports, 2 side USB 2.0 ports, and 1 front USB 2.0 port support Windows compatible devices | USB Device Port | 1 port - USBTMC over USB 3.1 Gen1 | GPIB Port (optional) | Supports IEEE - 488.2 (External) | External Monitor Port | DisplayPort 1.1 (Qty. 2) and DVI-D (Qty. 1) to support customer-supplied external monitor. Includes support for extended desktop operation with WQXGA (2560 x 1600) pixel resolution and split-grid capability on external monitor. Supports touch screen integration of external monitor (Note: external display can not use a Fujitsu touch-screen driver). | Remote Control | Via Windows Automation, or via LeCroy Remote Command Set | Network Communication Standard | VXI-11 or VICP, LXI Class C (v1.2) Compliant | Peripheral Bus | Teldyne LeCroy LBUS standard | | Auxiliary Input | Signal Types | Select External Trigger or External Clock Input on the front panel | Coupling | 50 Ω: DC; 1 MΩ: AC, DC, GND | Max. Input Voltage | 50 Ω: 5 Vrms; 1 MΩ: 250 Vmax (DC + Peak AC ≦ 10 kHz) | | Auxiliary Output | Signal Types | Select from control signals or Off | Output Signal | 500 Hz-1 MHz square wave or DC level; 50 mV-1 V into 1 MΩ | Control Signals | Trigger enabled, trigger out, pass/fail status, fast edge, off | Connector Type | BNC, located on front | | Probes | Probes
| Qty. (4) ÷10 Passive Probes | Probe System | ProBus. Automatically detects and supports a variety of compatible probes | Scale Factors | Automatically or manually selected depending on probe used | Calibration Output | Default is 1kHz square wave, 1Vp-p (typical), output to probe hook. Settable from 500 Hz to 1 MHz square wave; 50 mV to 1.0V. | | Power Requirements | Voltage | 100-240 VAC ±10% at 50/60 Hz ±5%; 110-120 VAC ±10% at 400 Hz ±5%; Automatic AC Voltage Selection | Nominal Power Consumption | 415 W / 415 VA | Max. Power Consumption | 500 W / 500 VA (with all PC peripherals and active probes connected to 4 channels) | | Environmental | Temperature (Operating) | +5 °C to +40 °C | Temperature (Non-Operating) | -20 °C to +60 °C | Humidity (Operating) | 5% to 90% relative humidity (non-condensing) up to +31 °C. Upper limit derates to 50% relative humidity (non-condensing) at +40 °C. | Humidity (Non-Operating) | 5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F | Altitude (Operating) | Up to 3,000 m at or below +30 °C | Altitude (Non-Operating) | Up to 40,000 ft. (12,192 m) | Random Vibration (Operating) | 0.31 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes | Random Vibration (Non-Operating) | 2.4 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes | Functional Shock | 30 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total | | Size and Weight | Dimensions (HWD) | 14.1" H x 17.5" W x 9.5" D (358 x 445 x 242 mm) | Weight | 25.8 lbs. (11.7 kg) | Shipping Weight | 42 lbs. (19.0 kg) | | Certifications | CE Certification UL and cUL Listing | CE Compliant, UL and cUL listed; conforms to UL 61010-1 (3rd Edition), UL 61010-2-030 (1st Edition) CAN/CSA C22.2 No. 61010-1-12 | | Warranty and Service | Warranty and Service | 3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, and calibration services. | |
HDO9404 スペック
Vertical - Analog Channels | Analog Bandwidth (Max) | 4 GHz | Analog Bandwidth @ 50 Ω (-3 dB) (ProBus Input) | 4 GHz (≧ 5 mV/div) | Analog Bandwidth @ 1 MΩ (-3 dB) (ProBus Input) | 1 GHz (typical) | Rise Time (10-90%, 50 Ω) | 100 ps (typical) | Rise Time (20-80%, 50 Ω) | 75 ps (typical) | Input Channels | 4 | Vertical Resolution | 10 bits, up to 13.8 bits with Optimized Filtering | Effective Number of Bits (ENOB) | 6.8 bits (typical) | Vertical Noise Floor (1 mV/div) | 160 uV | Vertical Noise Floor (2 mV/div) | 160 uV | Vertical Noise Floor (5 mV/div) | 317 uV | Vertical Noise Floor (10 mV/div) | 342 uV | Vertical Noise Floor (50 mV/div) | 859 uV | Vertical Noise Floor (100 mV/div) | 1.48 mV | Vertical Noise Floor (200 mV/div) | 5.15 mV | Vertical Noise Floor (500 mV/div) | 8.37 mV | Vertical Noise Floor (1 V/div) | 14.9 mV | Sensitivity | 50 Ω: 1 mV-1 V/div, fully variable; 1 MΩ: 1 mV-10 V/div, fully variable | DC Vertical Gain Accuracy (Gain Component of DC Accuracy) | ±(1%) F.S, offset at 0 V | Channel-Channel Isolation | DC -2.5 GHz: 40 dB (>100:1), 2.5 GHz to rated BW: 31.6 dB (>30:1) (For any two ProBus input channels, same v/div settings, typical) | Offset Range | 50 Ω BWL≦1 GHz ±1.6 V @ 1 mV - 4.95 mV/div ±4 V @ 5 mV - 9.9 mV/div ±8 V @ 10 mV - 19.8 mV/div ±10 V @ 20 mV - 1V/div BWL>1GHz ±1.4V @ 5 mV - 100 mV/div ±10V @ 102 mV - 1 V/div
1 MΩ ±1.6 V @ 1 mV - 4.95 mV/div ±4 V @ 5 mV - 9.9 mV/div ±8 V @ 10 mV - 19.8 mV/div ±16 V @ 20 mV - 100 mV/div ±80 V @ 102 mV - 1.0 V/div ±160 V @ 1.02 V - 10 V/div | DC Vertical Offset Accuracy | ±(1.5% of offset setting +1% of full scale + 1 mV) (test limit) | Maximum Input Voltage | 50 Ω: 5V RMS ± 10V peak 1 MΩ: 400 V max. (DC + peak AC < 10 kHz) | Input Coupling | 1 MΩ: AC, DC, GND; 50 Ω: DC, GND | Input Impedance | 50 Ω+/-2% or 1 MΩ||17pF, 10 MΩ || 9.5 pF with supplied Probe | Bandwidth Limiters | 20MHz, 200MHz, 500 MHz, 1GHz, 2 GHz, 3 GHz | | Horizontal - Analog Channels | Timebases | Internal timebase common to 4 input channels; an external clock may be applied at the EXT input | Time/Division Range | HD1024 on: 20 ps/div - 500 μs/div HD1024 off: 20 ps/div - 6.4 ks/div; RIS available at ≦ 10 ns/div; Roll Mode available at ≧ 100 ms/div and ≦ 5 MS/s | Clock Accuracy | <=1.5 ppm +(aging of 0.5 ppm/yr from last calibration) | Channel-Channel Deskew Range | ±9 x time/div. setting, each channel | External Timebase Reference (Input) | 10MHz +/-25ppm into 50 ohms | External Timebase Reference (Output) | 10MHz, 3.5 dBm +/-1dBm, syncronized to reference being used (internal or external reference) | External Clock | DC to 100 MHz; (50 Ω/1 MΩ), EXT BNC input, Minimum rise time and amplitude requirements apply at low frequencies. | | Acquisition - Analog Channels | Sample Rate (Single-shot) | 20 GS/s on 4 Ch 40 GS/s on 2 Ch | Sample Rate (Repetitive) | 200 GS/s for repetitive signals (20 ps/div to 10 ns/div) | Memory Length (4 Ch / 2 Ch / 1Ch) (Number of Segments) | 64M / 128M / 128M (15,000) | Intersegment Time | 1 μs | Averaging | Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps | Envelope (Extrema) | Envelope, floor, or roof for up to 1 million sweeps | Interpolation | Linear or Sin x/x (2 pt and 4 pt); automatically set when HD1024 is enabled | | Triggering System | Modes | Normal, Auto, Single, and Stop | Sources | Any input channel, Ext, Ext/10, or line; slope and level unique to each source (except line trigger) | Coupling | DC, AC, HFRej, LFRej | Pre-trigger Delay | 0-100% of memory size (adjustable in 1% increments of 100 ns) | Post-trigger Delay | 0-10,000 Divisions in real time mode, limited at slower time/div settings or in roll mode | Trigger Sensitivity with Edge Trigger ProBus Inputs | 2 div @ < 4 GHz 1.5 div @< 2 GHz 1 div @ < 200 MHz 0.9 div @<10 MHz (DC, AC, and LFRej coupling, ≧ 10 mV/div, 50 Ω) | External Trigger Sensitivity, (Edge Trigger) | 2 div @ 1 GHz 1.5 div @ < 500 MHz 1 div @ <200 MHz 0.9 div @<10 MHz (DC, AC, and LFRej coupling) | Hold-off | From 2 ns up to 20 s or from 1 to 99,999,999 events | Internal Trigger Level Range | ±4.1 div from center (typical) | External Trigger Level Range | Ext (±0.4 V); Ext/10 (±4 V) | Maximum Trigger Rate | 1,000,000 waveforms/second (in Sequence Mode, up to 4 channels) | Max Trigger Frequency (C1-C4, Aux In, SMART Trigger) | 2.0 GHz @ ≧ 10 mV/div (minimum triggerable width 200 ps) | | Trigger Types | Edge | Triggers when signal meets slope (positive, negative, or either) and level condition. | Width | Triggers on positive or negative glitches with selectable widths. Minimum width 500 ps, maximum width: 20 s | Glitch | Triggers on positive or negative glitches with selectable widths. Minimum width 200 ps, maximum width: 20 s | Window | Triggers when signal exits a window defined by adjustable thresholds | Pattern | Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don't care. The High and Low level can be selected independently. Triggers at start or end of the pattern. | TV-Composite Video | Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative). | Runt | Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns. | Slew Rate | Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns. | Interval | Triggers on intervals selectable between 1 ns and 20 s. | Dropout | Triggers if signal drops out for longer than selected time between 1 ns and 20 s. | Exclusion Triggering | Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met | Measurement Trigger | Select from a large number of measurement parameters trigger on a measurement value with qualified limits. Can be used as only trigger or last event in a Cascade Trigger. | Multi-Stage: Qualified | Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events. | Multi-Stage: Qualified First | In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events. | Multi-Stage: Cascade (Sequence) Trigger, Capability | Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. | Multi-Stage: Cascade (Sequence) Trigger, Types | Cascade A then B: Edge, Window, Pattern (Logic) Width, Glitch, Interval, Dropout, or Measurement. Measurement can be on Stage B only. Cascade A then B then C (Measurement): Edge, Window, Pattern (Logic), Width, Glitch, Interval, Dropout, or Measurement. Measurement can be on Stage C only. Cascade A then B then C: Edge, Window, Pattern (Logic) | Multi-Stage: Cascade (Sequence) Trigger, Holdoff | Holdoff between A and B or B and C is selectable by time (1ns to 20s) or number of events. Measurement trigger selection as the last stage in a Cascade precludes a holdoff setting between the prior stage and the last stage. | | Low Speed Serial Protocol Trigger (Optional) | Optionally available | I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN1.1, CAN2.0, CAN FD, LIN, FlexRay, MIL-STD-1553, AudioBus (I2S, LJ, RJ, TDM), USB1.x/2.0, SATA | | High Speed Serial Protocol Trigger | Data Rates | (Option HDO9K-80B-8B10B TD) 150 Mb/s - 3.125 Gb/s | Pattern Length | 80 bits, NRZ or 8b10b | Clock Recovery Jitter | 1 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density | Hardware Clock Recovery Loop BW | PLL Loop BW = Fbaud/5500, 100 Mb/s to 2.488 Gb/s (typical) | | Measurement Tools | Measurement Functionality | Display up to 12 measurement parameters together with statistics, including mean, minimum, maximum, standard deviation, and total number. Each occurrence of each parameter is measured and added to the statistics table. Histicons provide a fast, dynamic view of parameters and waveshape characteristics. Parameter math allows addition, subtraction, multiplication, or division of two different parameters. Parameter gates define the location for measurement on the source waveform. | Measurement Parameters - Horizontal | Bit rate, Cycles, Delay, Delta Delay, Duty Cycle, Duration, Frequency, First, Last, Narrow band phase, Narrow band power, Number of points, Period, Width, Phase, Time @ minimum (min.), Time @ maximum (max.), Delta time @ level, Delta time @ level from trigger, X @ max., X @ min.
Cycle-Cycle Jitter, N-Cycle, N-Cycle with start selection, Frequency @ level, Period @ level, Half Period, Width @ level, Time Interval Error @ level, Setup, Hold, Skew, Duty Cycle @ level, Duty Cycle Error, Edge @ lv (counts edges) | Measurement Parameters - Vertical | Amplitude, Base (Low), Level @ x, Maximum, Mean, Median, Minimum, Peak-to-peak, RMS, Std. deviation, Top | Measurement Parameters - Pulse | Area, Fall time (90-10%, 80-20%, @ level), + Overshoot, - Overshoot, Risetime (10-90%, 20-80%, @ level), | Measurement Parameters | Amplitude, Area, Base (Low), Bit rate, Cycles, Delay, Delta Delay, Duty Cycle, Duration, Fall time (90-10%, 80-20%, @ level), Frequency, First, Last, Level @ x, Maximum, Mean, Median, Minimum, Narrow band phase, Narrow band power, Number of points, + Overshoot, - Overshoot, Peak-to-peak, Period, Risetime (10-90%, 20-80%, @ level), RMS, Std. deviation, Top, Width, Phase, Time @ minimum (min.), Time @ maximum (max.), Delta time @ level, Delta time @ level from trigger, X @ max., X @ min.
Cycle-Cycle Jitter, N-Cycle, N-Cycle with start selection, Frequency @ level, Period @ level, Half Period, Width @ level, Time Interval Error @ level, Setup, Hold, Skew, Duty Cycle @ level, Duty Cycle Error, Edge @ lv (counts edges) | | Math Tools | Math Functionality | Display up to 12 math functions traces (F1-F12). The easy-to-use graphical interface simplifies setup of up to two operations on each function trace, and function traces can be chained together to perform math-on-math. | Math Operators - Basic Math | Average (summed), Average (continuous), Difference (-), Envelope, Floor, Product (x), Roof, Sum (+) | Math Operators - Filters | Enhanced resolution (to 11 bits vertical), Interpolate (cubic, quadratic, sinx/x), (SINx)/x | Math Operators - Frequency Analysis | FFT (power spectrum, magnitude, phase, power density, real, imaginary, magnitude squared, up to 128 Mpts and rectangular, VonHann, Hamming, FlatTop and Blackman Harris windows) | Math Operators - Functions | Absolute value, Correlation (two waveforms), Derivative, Deskew (resample), Exp (base e), Exp (base 10), Integral,Invert (negate), Log (base e), Log (base 10), Reciprocal, Rescale (with units), Square, Square root, Zoom (identity) | Math Operators - Other | Sparse | | Measurement and Math Integration | Measurement and Math Integration | Histograms to display statistical distributions of up to 2 billion measurement parameters. Trend (datalog) of up to 1 million measurement parameters. Track (display parameter vs. time, time-correlated to acquisitions) any parameter. Persistence histogram and persistence trace (mean, range, sigma) | | Pass/Fail Testing | Test Types | Parameter limit testing, mask testing. Pass/Fail Actions include: Save, Stop, Alarm, Pulse, Hardcopy, LabNotebook | | Display System | Size | Color 15.4" widescreen capacitive touch screen | Resolution | WXGA; 1280 x 800 pixels. | Number of traces | Display a maximum of 16 traces. Simultaneously display channel, zoom, memory and math traces. | Grid Styles | Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y, Tandem, Quatro, Twelve, Sixteen | Waveform Representation | Sample dots joined, or sample dots only | | Integrated Second Display | Size | Supports touch screen integration of user-supplied second display with split-grid capability. (Note: touch screen driver for second display may not be a Fujitsu driver) | Type | Supports touch screen integration of user-supplied second display with split-grid capability. (Note: touch screen driver for second display may not be a Fujitsu driver) | | Persistence Display | Analog and Color-Graded Persistence | Variable saturation levels; stores each trace's persistence data in memory | Persistence Types | Select analog, color, or three-dimensional | Trace Selection | Activate persistence on all or any combination of traces | Persistence Aging | Select from 500 ms to infinity | Sweep Display Modes | All accumulated, or all accumulated with last trace highlighted | | Zoom Expansion Traces | Zoom Expansion Traces | Display up to 12 Zoom and 12 Math/Zoom traces | | Internal Waveform Memory | Internal Waveform Memory | 12 active waveform memory traces (M1-M12) store 16 bit/point full length waveforms. Waveforms can be stored to any number of files limited only by the data storage media capacity. | | Setup Storage | Setup Storage | Store to the internal hard drive, over the network, or to a USB-connected peripheral device. | | Automatic Setup | Auto Setup | Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals | Find Vertical Scale | Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range | | Calibration | Auto Calibration | Ensures specified DC and timing accuracy is maintained for 1 year minimum. | | Processor/CPU | Type | IntelR i5-3610 Dual Core, 2.7 GHz (or better) | Processor Memory | 16 GB standard | Operating System | Microsoft WindowsR 7 For Embedded Systems 64Bits | Real Time Clock | Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks. | | Connectivity | Ethernet Port | Supports 10/100/1000BaseT Ethernet interface (RJ45 port) | USB Host Ports | 4 side USB 3.1 Gen1 ports, 2 side USB 2.0 ports, and 1 front USB 2.0 port support Windows compatible devices | USB Device Port | 1 port - USBTMC over USB 3.1 Gen1 | GPIB Port (optional) | Supports IEEE - 488.2 (External) | External Monitor Port | DisplayPort 1.1 (Qty. 2) and DVI-D (Qty. 1) to support customer-supplied external monitor. Includes support for extended desktop operation with WQXGA (2560 x 1600) pixel resolution and split-grid capability on external monitor. Supports touch screen integration of external monitor (Note: external display can not use a Fujitsu touch-screen driver). | Remote Control | Via Windows Automation, or via LeCroy Remote Command Set | Network Communication Standard | VXI-11 or VICP, LXI Class C (v1.2) Compliant | Peripheral Bus | Teldyne LeCroy LBUS standard | | Auxiliary Input | Signal Types | Select External Trigger or External Clock Input on the front panel | Coupling | 50 Ω: DC; 1 MΩ: AC, DC, GND | Max. Input Voltage | 50 Ω: 5 Vrms; 1 MΩ: 250 Vmax (DC + Peak AC ≦ 10 kHz) | | Auxiliary Output | Signal Types | Select from control signals or Off | Output Signal | 500 Hz-1 MHz square wave or DC level; 50 mV-1 V into 1 MΩ | Control Signals | Trigger enabled, trigger out, pass/fail status, fast edge, off | Connector Type | BNC, located on front | | Probes | Probes
| Qty. (4) ÷10 Passive Probes | Probe System | ProBus. Automatically detects and supports a variety of compatible probes | Scale Factors | Automatically or manually selected depending on probe used | Calibration Output | Default is 1kHz square wave, 1Vp-p (typical), output to probe hook. Settable from 500 Hz to 1 MHz square wave; 50 mV to 1.0V. | | Power Requirements | Voltage | 100-240 VAC ±10% at 50/60 Hz ±5%; 110-120 VAC ±10% at 400 Hz ±5%; Automatic AC Voltage Selection | Nominal Power Consumption | 415 W / 415 VA | Max. Power Consumption | 500 W / 500 VA (with all PC peripherals and active probes connected to 4 channels) | | Environmental | Temperature (Operating) | +5 °C to +40 °C | Temperature (Non-Operating) | -20 °C to +60 °C | Humidity (Operating) | 5% to 90% relative humidity (non-condensing) up to +31 °C. Upper limit derates to 50% relative humidity (non-condensing) at +40 °C. | Humidity (Non-Operating) | 5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F | Altitude (Operating) | Up to 3,000 m at or below +30 °C | Altitude (Non-Operating) | Up to 40,000 ft. (12,192 m) | Random Vibration (Operating) | 0.31 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes | Random Vibration (Non-Operating) | 2.4 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes | Functional Shock | 30 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total | | Size and Weight | Dimensions (HWD) | 14.1" H x 17.5" W x 9.5" D (358 x 445 x 242 mm) | Weight | 25.8 lbs. (11.7 kg) | Shipping Weight | 42 lbs. (19.0 kg) | | Certifications | CE Certification UL and cUL Listing | CE Compliant, UL and cUL listed; conforms to UL 61010-1 (3rd Edition), UL 61010-2-030 (1st Edition) CAN/CSA C22.2 No. 61010-1-12 | | Warranty and Service | Warranty and Service | 3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, and calibration services. | |
HDO9104-MS スペック
Vertical - Analog Channels | Analog Bandwidth (Max) | 1 GHz | Analog Bandwidth @ 50 Ω (-3 dB) (ProBus Input) | 1 GHz (≧2 mV/div) | Analog Bandwidth @ 1 MΩ (-3 dB) (ProBus Input) | 1 GHz (typical) | Rise Time (10-90%, 50 Ω) | 415 ps (typical) | Rise Time (20-80%, 50 Ω) | 290 ps (typical) | Input Channels | 4 | Vertical Resolution | 10 bits, up to 13.8 bits with Optimized Filtering | Effective Number of Bits (ENOB) | 7.9 bits (typical) | Vertical Noise Floor (1 mV/div) | 160 uV | Vertical Noise Floor (2 mV/div) | 160 uV | Vertical Noise Floor (5 mV/div) | 175 uV | Vertical Noise Floor (10 mV/div) | 184 uV | Vertical Noise Floor (50 mV/div) | 435 uV | Vertical Noise Floor (100 mV/div) | 761 uV | Vertical Noise Floor (200 mV/div) | 2.73 mV | Vertical Noise Floor (500 mV/div) | 4.67 mV | Vertical Noise Floor (1 V/div) | 7.79 mV | Sensitivity | 50 Ω: 1 mV-1 V/div, fully variable; 1 MΩ: 1 mV-10 V/div, fully variable | DC Vertical Gain Accuracy (Gain Component of DC Accuracy) | ±(1%) F.S, offset at 0 V | Channel-Channel Isolation | DC up to rated BW: 40 dB (>100:1), (For any two ProBus input channels, same v/div settings, typical) | Offset Range | 50 Ω ±1.6 V @ 1 mV - 4.95 mV/div ±4 V @ 5 mV - 9.9 mV/div ±8 V @ 10 mV - 19.8 mV/div ±10 V @ 20 mV - 1 V/div
1 MΩ ±1.6 V @ 1 mV - 4.95 mV/div ±4 V @ 5 mV - 9.9 mV/div ±8 V @ 10 mV - 19.8 mV/div ±16 V @ 20 mV - 100 mV/div ±80 V @ 102 mV - 1.0 V/div ±160 V @ 1.02 V - 10 V/div | DC Vertical Offset Accuracy | ±(1.5% of offset setting +1% of full scale + 1 mV) (test limit) | Maximum Input Voltage | 50 Ω: 5V RMS ± 10V peak 1 MΩ: 400 V max. (DC + peak AC < 10 kHz) | Input Coupling | 1 MΩ: AC, DC, GND; 50 Ω: DC, GND | Input Impedance | 50 Ω+/-2% or 1 MΩ||17pF, 10 MΩ || 9.5 pF with supplied Probe | Bandwidth Limiters | 20MHz, 200MHz, 500 MHz | | Horizontal - Analog Channels | Timebases | Internal timebase common to 4 input channels; an external clock may be applied at the EXT input | Time/Division Range | HD1024 on: 20 ps/div - 500 μs/div HD1024 off: 20 ps/div - 6.4 ks/div; RIS available at ≦ 10 ns/div; Roll Mode available at ≧ 100 ms/div and ≦ 5 MS/s | Clock Accuracy | <=1.5 ppm +(aging of 0.5 ppm/yr from last calibration) | Channel-Channel Deskew Range | ±9 x time/div. setting, each channel | External Timebase Reference (Input) | 10MHz +/-25ppm into 50 ohms | External Timebase Reference (Output) | 10MHz, 3.5 dBm +/-1dBm, syncronized to reference being used (internal or external reference) | External Clock | DC to 100 MHz; (50 Ω/1 MΩ), EXT BNC input, Minimum rise time and amplitude requirements apply at low frequencies. | | Acquisition - Analog Channels | Sample Rate (Single-shot) | 20 GS/s on 4 Ch 40 GS/s on 2 Ch | Sample Rate (Repetitive) | 200 GS/s for repetitive signals (20 ps/div to 10 ns/div) | Memory Length (4 Ch / 2 Ch / 1Ch) (Number of Segments) | 64M / 128M / 128M (15,000) | Intersegment Time | 1 μs | Averaging | Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps | Envelope (Extrema) | Envelope, floor, or roof for up to 1 million sweeps | Interpolation | Linear or Sin x/x (2 pt and 4 pt); automatically set when HD1024 is enabled | | Vertical, Horizontal, Acquisition - Digital Channels | Maximum Input Frequency | 250 MHz | Minimum Detectable Pulse Width | 2 ns | Input Channels | 16 Digital channels | Input Impedance (Flying Leads) | 100 kΩ || 5 pF | Input Dynamic Range | ± 20V | Maximum Input Voltage | ±30V Peak | Maximum Input Voltage Swing | 400mV | Threshold Groupings | Pod 2: D15 - D8, Pod 1: D7 - D0 | Threshold Selections | TTL, ECL, CMOS (2.5 V, 3.3 V, 5 V), PECL, LVDS or User Defined | Threshold Accuracy | ±(3% of threshold setting + 100mV) | User Defined Threshold Range | ±10 V in 20 mV steps | User Defined Hysteresis Range | 100 mV to 1.4 V in 100 mV steps | Sample Rate | 1.25 GS/s | Record Length | 128MS - 16 Channels | Channel-to-Channel Skew | 350 ps | | Triggering System | Modes | Normal, Auto, Single, and Stop | Sources | Any input channel, Ext, Ext/10, or line; slope and level unique to each source (except line trigger) | Coupling | DC, AC, HFRej, LFRej | Pre-trigger Delay | 0-100% of memory size (adjustable in 1% increments of 100 ns) | Post-trigger Delay | 0-10,000 Divisions in real time mode, limited at slower time/div settings or in roll mode | Trigger Sensitivity with Edge Trigger ProBus Inputs | 2 div @ < 1 GHz 1.5 div @< 500 MHz 1 div @ < 200 MHz 0.9 div @<10 MHz (DC, AC, and LFRej coupling, ≧ 10 mV/div, 50 Ω) | External Trigger Sensitivity, (Edge Trigger) | 2 div @ 1 GHz 1.5 div @ < 500 MHz 1 div @ <200 MHz 0.9 div @<10 MHz (DC, AC, and LFRej coupling) | Hold-off | From 2 ns up to 20 s or from 1 to 99,999,999 events | Internal Trigger Level Range | ±4.1 div from center (typical) | External Trigger Level Range | Ext (±0.4 V); Ext/10 (±4 V) | Maximum Trigger Rate | 1,000,000 waveforms/second (in Sequence Mode, up to 4 channels) | Max Trigger Frequency (C1-C4, Aux In, SMART Trigger) | 1.0 GHz @ ≧ 10 mV/div (minimum triggerable width 750 ps) | | Trigger Types | Edge | Triggers when signal meets slope (positive, negative, or either) and level condition. | Width | Triggers on positive or negative glitches with selectable widths. Minimum width 500 ps, maximum width: 20 s | Glitch | Triggers on positive or negative glitches with selectable widths. Minimum width 200 ps, maximum width: 20 s | Window | Triggers when signal exits a window defined by adjustable thresholds | Pattern | Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don't care. The High and Low level can be selected independently. Triggers at start or end of the pattern. | TV-Composite Video | Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative). | Runt | Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns. | Slew Rate | Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns. | Interval | Triggers on intervals selectable between 1 ns and 20 s. | Dropout | Triggers if signal drops out for longer than selected time between 1 ns and 20 s. | Exclusion Triggering | Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met | Measurement Trigger | Select from a large number of measurement parameters trigger on a measurement value with qualified limits. Can be used as only trigger or last event in a Cascade Trigger. | Multi-Stage: Qualified | Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events. | Multi-Stage: Qualified First | In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events. | Multi-Stage: Cascade (Sequence) Trigger, Capability | Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. | Multi-Stage: Cascade (Sequence) Trigger, Types | Cascade A then B: Edge, Window, Pattern (Logic) Width, Glitch, Interval, Dropout, or Measurement. Measurement can be on Stage B only. Cascade A then B then C (Measurement): Edge, Window, Pattern (Logic), Width, Glitch, Interval, Dropout, or Measurement. Measurement can be on Stage C only. Cascade A then B then C: Edge, Window, Pattern (Logic) | Multi-Stage: Cascade (Sequence) Trigger, Holdoff | Holdoff between A and B or B and C is selectable by time (1ns to 20s) or number of events. Measurement trigger selection as the last stage in a Cascade precludes a holdoff setting between the prior stage and the last stage. | | Low Speed Serial Protocol Trigger (Optional) | Optionally available | I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN1.1, CAN2.0, CAN FD, LIN, FlexRay, MIL-STD-1553, AudioBus (I2S, LJ, RJ, TDM), USB1.x/2.0, SATA | | High Speed Serial Protocol Trigger | Data Rates | (Option HDO9K-80B-8B10B TD) 150 Mb/s - 3.125 Gb/s | Pattern Length | 80 bits, NRZ or 8b10b | Clock Recovery Jitter | 1 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density | Hardware Clock Recovery Loop BW | PLL Loop BW = Fbaud/5500, 100 Mb/s to 2.488 Gb/s (typical) | | Measurement Tools | Measurement Functionality | Display up to 12 measurement parameters together with statistics, including mean, minimum, maximum, standard deviation, and total number. Each occurrence of each parameter is measured and added to the statistics table. Histicons provide a fast, dynamic view of parameters and waveshape characteristics. Parameter math allows addition, subtraction, multiplication, or division of two different parameters. Parameter gates define the location for measurement on the source waveform. | Measurement Parameters - Horizontal | Bit rate, Cycles, Delay, Delta Delay, Duty Cycle, Duration, Frequency, First, Last, Narrow band phase, Narrow band power, Number of points, Period, Width, Phase, Time @ minimum (min.), Time @ maximum (max.), Delta time @ level, Delta time @ level from trigger, X @ max., X @ min.
Cycle-Cycle Jitter, N-Cycle, N-Cycle with start selection, Frequency @ level, Period @ level, Half Period, Width @ level, Time Interval Error @ level, Setup, Hold, Skew, Duty Cycle @ level, Duty Cycle Error, Edge @ lv (counts edges) | Measurement Parameters - Vertical | Amplitude, Base (Low), Level @ x, Maximum, Mean, Median, Minimum, Peak-to-peak, RMS, Std. deviation, Top | Measurement Parameters - Pulse | Area, Fall time (90-10%, 80-20%, @ level), + Overshoot, - Overshoot, Risetime (10-90%, 20-80%, @ level), | Measurement Parameters | Amplitude, Area, Base (Low), Bit rate, Cycles, Delay, Delta Delay, Duty Cycle, Duration, Fall time (90-10%, 80-20%, @ level), Frequency, First, Last, Level @ x, Maximum, Mean, Median, Minimum, Narrow band phase, Narrow band power, Number of points, + Overshoot, - Overshoot, Peak-to-peak, Period, Risetime (10-90%, 20-80%, @ level), RMS, Std. deviation, Top, Width, Phase, Time @ minimum (min.), Time @ maximum (max.), Delta time @ level, Delta time @ level from trigger, X @ max., X @ min.
Cycle-Cycle Jitter, N-Cycle, N-Cycle with start selection, Frequency @ level, Period @ level, Half Period, Width @ level, Time Interval Error @ level, Setup, Hold, Skew, Duty Cycle @ level, Duty Cycle Error, Edge @ lv (counts edges) | | Math Tools | Math Functionality | Display up to 12 math functions traces (F1-F12). The easy-to-use graphical interface simplifies setup of up to two operations on each function trace, and function traces can be chained together to perform math-on-math. | Math Operators - Basic Math | Average (summed), Average (continuous), Difference (-), Envelope, Floor, Product (x), Roof, Sum (+) | Math Operators - Filters | Enhanced resolution (to 11 bits vertical), Interpolate (cubic, quadratic, sinx/x), (SINx)/x | Math Operators - Frequency Analysis | FFT (power spectrum, magnitude, phase, power density, real, imaginary, magnitude squared, up to 128 Mpts and rectangular, VonHann, Hamming, FlatTop and Blackman Harris windows) | Math Operators - Functions | Absolute value, Correlation (two waveforms), Derivative, Deskew (resample), Exp (base e), Exp (base 10), Integral,Invert (negate), Log (base e), Log (base 10), Reciprocal, Rescale (with units), Square, Square root, Zoom (identity) | Math Operators - Other | Sparse | | Measurement and Math Integration | Measurement and Math Integration | Histograms to display statistical distributions of up to 2 billion measurement parameters. Trend (datalog) of up to 1 million measurement parameters. Track (display parameter vs. time, time-correlated to acquisitions) any parameter. Persistence histogram and persistence trace (mean, range, sigma) | | Pass/Fail Testing | Test Types | Parameter limit testing, mask testing. Pass/Fail Actions include: Save, Stop, Alarm, Pulse, Hardcopy, LabNotebook | | Display System | Size | Color 15.4" widescreen capacitive touch screen | Resolution | WXGA; 1280 x 800 pixels. | Number of traces | Display a maximum of 16 traces. Simultaneously display channel, zoom, memory and math traces. | Grid Styles | Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y, Tandem, Quatro, Twelve, Sixteen | Waveform Representation | Sample dots joined, or sample dots only | | Integrated Second Display | Size | Supports touch screen integration of user-supplied second display with split-grid capability. (Note: touch screen driver for second display may not be a Fujitsu driver) | Type | Supports touch screen integration of user-supplied second display with split-grid capability. (Note: touch screen driver for second display may not be a Fujitsu driver) | | Persistence Display | Analog and Color-Graded Persistence | Variable saturation levels; stores each trace's persistence data in memory | Persistence Types | Select analog, color, or three-dimensional | Trace Selection | Activate persistence on all or any combination of traces | Persistence Aging | Select from 500 ms to infinity | Sweep Display Modes | All accumulated, or all accumulated with last trace highlighted | | Zoom Expansion Traces | Zoom Expansion Traces | Display up to 12 Zoom and 12 Math/Zoom traces | | Internal Waveform Memory | Internal Waveform Memory | 12 active waveform memory traces (M1-M12) store 16 bit/point full length waveforms. Waveforms can be stored to any number of files limited only by the data storage media capacity. | | Setup Storage | Setup Storage | Store to the internal hard drive, over the network, or to a USB-connected peripheral device. | | Automatic Setup | Auto Setup | Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals | Find Vertical Scale | Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range | | Calibration | Auto Calibration | Ensures specified DC and timing accuracy is maintained for 1 year minimum. | | Processor/CPU | Type | IntelR i5-3610 Dual Core, 2.7 GHz (or better) | Processor Memory | 16 GB standard | Operating System | Microsoft WindowsR 7 For Embedded Systems 64Bits | Real Time Clock | Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks. | | Connectivity | Ethernet Port | Supports 10/100/1000BaseT Ethernet interface (RJ45 port) | USB Host Ports | 4 side USB 3.1 Gen1 ports, 2 side USB 2.0 ports, and 1 front USB 2.0 port support Windows compatible devices | USB Device Port | 1 port - USBTMC over USB 3.1 Gen1 | GPIB Port (optional) | Supports IEEE - 488.2 (External) | External Monitor Port | DisplayPort 1.1 (Qty. 2) and DVI-D (Qty. 1) to support customer-supplied external monitor. Includes support for extended desktop operation with WQXGA (2560 x 1600) pixel resolution and split-grid capability on external monitor. Supports touch screen integration of external monitor (Note: external display can not use a Fujitsu touch-screen driver). | Remote Control | Via Windows Automation, or via LeCroy Remote Command Set | Network Communication Standard | VXI-11 or VICP, LXI Class C (v1.2) Compliant | Peripheral Bus | Teldyne LeCroy LBUS standard | | Auxiliary Input | Signal Types | Select External Trigger or External Clock Input on the front panel | Coupling | 50 Ω: DC; 1 MΩ: AC, DC, GND | Max. Input Voltage | 50 Ω: 5 Vrms; 1 MΩ: 250 Vmax (DC + Peak AC ≦ 10 kHz) | | Auxiliary Output | Signal Types | Select from control signals or Off | Output Signal | 500 Hz-1 MHz square wave or DC level; 50 mV-1 V into 1 MΩ | Control Signals | Trigger enabled, trigger out, pass/fail status, fast edge, off | Connector Type | BNC, located on front | | Probes | Probes
| Qty. (4) ÷10 Passive Probes | Probe System | ProBus. Automatically detects and supports a variety of compatible probes | Scale Factors | Automatically or manually selected depending on probe used | Calibration Output | Default is 1kHz square wave, 1Vp-p (typical), output to probe hook. Settable from 500 Hz to 1 MHz square wave; 50 mV to 1.0V. | | Power Requirements | Voltage | 100-240 VAC ±10% at 50/60 Hz ±5%; 110-120 VAC ±10% at 400 Hz ±5%; Automatic AC Voltage Selection | Nominal Power Consumption | 415 W / 415 VA | Max. Power Consumption | 500 W / 500 VA (with all PC peripherals and active probes connected to 4 channels) | | Environmental | Temperature (Operating) | +5 °C to +40 °C | Temperature (Non-Operating) | -20 °C to +60 °C | Humidity (Operating) | 5% to 90% relative humidity (non-condensing) up to +31 °C. Upper limit derates to 50% relative humidity (non-condensing) at +40 °C. | Humidity (Non-Operating) | 5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F | Altitude (Operating) | Up to 3,000 m at or below +30 °C | Altitude (Non-Operating) | Up to 40,000 ft. (12,192 m) | Random Vibration (Operating) | 0.31 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes | Random Vibration (Non-Operating) | 2.4 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes | Functional Shock | 30 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total | | Size and Weight | Dimensions (HWD) | 14.1" H x 17.5" W x 9.5" D (358 x 445 x 242 mm) | Weight | 25.8 lbs. (11.7 kg) | Shipping Weight | 42 lbs. (19.0 kg) | | Certifications | CE Certification UL and cUL Listing | CE Compliant, UL and cUL listed; conforms to UL 61010-1 (3rd Edition), UL 61010-2-030 (1st Edition) CAN/CSA C22.2 No. 61010-1-12 | | Warranty and Service | Warranty and Service | 3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, and calibration services. | |
HDO9204-MS スペック
Vertical - Analog Channels | Analog Bandwidth (Max) | 2 GHz | Analog Bandwidth @ 50 Ω (-3 dB) (ProBus Input) | 2 GHz (≧ 5 mV/div) | Analog Bandwidth @ 1 MΩ (-3 dB) (ProBus Input) | 1 GHz (typical) | Rise Time (10-90%, 50 Ω) | 200 ps (typical) | Rise Time (20-80%, 50 Ω) | 146 ps (typical) | Input Channels | 4 | Vertical Resolution | 10 bits, up to 13.8 bits with Optimized Filtering | Effective Number of Bits (ENOB) | 7.4 bits (typical) | Vertical Noise Floor (1 mV/div) | 160 uV | Vertical Noise Floor (2 mV/div) | 160 uV | Vertical Noise Floor (5 mV/div) | 225 uV | Vertical Noise Floor (10 mV/div) | 239 uV | Vertical Noise Floor (50 mV/div) | 600 uV | Vertical Noise Floor (100 mV/div) | 1.05 mV | Vertical Noise Floor (200 mV/div) | 3.64 mV | Vertical Noise Floor (500 mV/div) | 5.98 mV | Vertical Noise Floor (1 V/div) | 10.8 mV | Sensitivity | 50 Ω: 1 mV-1 V/div, fully variable; 1 MΩ: 1 mV-10 V/div, fully variable | DC Vertical Gain Accuracy (Gain Component of DC Accuracy) | ±(1%) F.S, offset at 0 V | Channel-Channel Isolation | DC up to rated BW: 40 dB (>100:1), (For any two ProBus input channels, same v/div settings, typical) | Offset Range | 50 Ω BWL≦1 GHz ±1.6 V @ 1 mV - 4.95 mV/div ±4 V @ 5 mV - 9.9 mV/div ±8 V @ 10 mV - 19.8 mV/div ±10 V @ 20 mV - 1V/div BWL>1GHz ±1.4V @ 5 mV - 100 mV/div ±10V @ 102 mV - 1 V/div
1 MΩ ±1.6 V @ 1 mV - 4.95 mV/div ±4 V @ 5 mV - 9.9 mV/div ±8 V @ 10 mV - 19.8 mV/div ±16 V @ 20 mV - 100 mV/div ±80 V @ 102 mV - 1.0 V/div ±160 V @ 1.02 V - 10 V/div | DC Vertical Offset Accuracy | ±(1.5% of offset setting +1% of full scale + 1 mV) (test limit) | Maximum Input Voltage | 50 Ω: 5V RMS ± 10V peak 1 MΩ: 400 V max. (DC + peak AC < 10 kHz) | Input Coupling | 1 MΩ: AC, DC, GND; 50 Ω: DC, GND | Input Impedance | 50 Ω+/-2% or 1 MΩ||17pF, 10 MΩ || 9.5 pF with supplied Probe | Bandwidth Limiters | 20MHz, 200MHz, 500 MHz, 1GHz | | Horizontal - Analog Channels | Timebases | Internal timebase common to 4 input channels; an external clock may be applied at the EXT input | Time/Division Range | HD1024 on: 20 ps/div - 500 μs/div HD1024 off: 20 ps/div - 6.4 ks/div; RIS available at ≦ 10 ns/div; Roll Mode available at ≧ 100 ms/div and ≦ 5 MS/s | Clock Accuracy | <=1.5 ppm +(aging of 0.5 ppm/yr from last calibration) | Channel-Channel Deskew Range | ±9 x time/div. setting, each channel | External Timebase Reference (Input) | 10MHz +/-25ppm into 50 ohms | External Timebase Reference (Output) | 10MHz, 3.5 dBm +/-1dBm, syncronized to reference being used (internal or external reference) | External Clock | DC to 100 MHz; (50 Ω/1 MΩ), EXT BNC input, Minimum rise time and amplitude requirements apply at low frequencies. | | Acquisition - Analog Channels | Sample Rate (Single-shot) | 20 GS/s on 4 Ch 40 GS/s on 2 Ch | Sample Rate (Repetitive) | 200 GS/s for repetitive signals (20 ps/div to 10 ns/div) | Memory Length (4 Ch / 2 Ch / 1Ch) (Number of Segments) | 64M / 128M / 128M (15,000) | Intersegment Time | 1 μs | Averaging | Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps | Envelope (Extrema) | Envelope, floor, or roof for up to 1 million sweeps | Interpolation | Linear or Sin x/x (2 pt and 4 pt); automatically set when HD1024 is enabled | | Vertical, Horizontal, Acquisition - Digital Channels | Maximum Input Frequency | 250 MHz | Minimum Detectable Pulse Width | 2 ns | Input Channels | 16 Digital channels | Input Impedance (Flying Leads) | 100 kΩ || 5 pF | Input Dynamic Range | ± 20V | Maximum Input Voltage | ±30V Peak | Maximum Input Voltage Swing | 400mV | Threshold Groupings | Pod 2: D15 - D8, Pod 1: D7 - D0 | Threshold Selections | TTL, ECL, CMOS (2.5 V, 3.3 V, 5 V), PECL, LVDS or User Defined | Threshold Accuracy | ±(3% of threshold setting + 100mV) | User Defined Threshold Range | ±10 V in 20 mV steps | User Defined Hysteresis Range | 100 mV to 1.4 V in 100 mV steps | Sample Rate | 1.25 GS/s | Record Length | 128MS - 16 Channels | | Triggering System | Modes | Normal, Auto, Single, and Stop | Sources | Any input channel, Ext, Ext/10, or line; slope and level unique to each source (except line trigger) | Coupling | DC, AC, HFRej, LFRej | Pre-trigger Delay | 0-100% of memory size (adjustable in 1% increments of 100 ns) | Post-trigger Delay | 0-10,000 Divisions in real time mode, limited at slower time/div settings or in roll mode | Trigger Sensitivity with Edge Trigger ProBus Inputs | 2 div @ < 2 GHz 1.5 div @< 1 GHz 1 div @ < 200 MHz 0.9 div @<10 MHz (DC, AC, and LFRej coupling, ≧ 10 mV/div, 50 Ω) | External Trigger Sensitivity, (Edge Trigger) | 2 div @ 1 GHz 1.5 div @ < 500 MHz 1 div @ <200 MHz 0.9 div @<10 MHz (DC, AC, and LFRej coupling) | Hold-off | From 2 ns up to 20 s or from 1 to 99,999,999 events | Internal Trigger Level Range | ±4.1 div from center (typical) | External Trigger Level Range | Ext (±0.4 V); Ext/10 (±4 V) | Maximum Trigger Rate | 1,000,000 waveforms/second (in Sequence Mode, up to 4 channels) | Max Trigger Frequency (C1-C4, Aux In, SMART Trigger) | 2.0 GHz @ ≧ 10 mV/div (minimum triggerable width 200 ps) | | Trigger Types | Edge | Triggers when signal meets slope (positive, negative, or either) and level condition. | Width | Triggers on positive or negative glitches with selectable widths. Minimum width 500 ps, maximum width: 20 s | Glitch | Triggers on positive or negative glitches with selectable widths. Minimum width 200 ps, maximum width: 20 s | Window | Triggers when signal exits a window defined by adjustable thresholds | Pattern | Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don't care. The High and Low level can be selected independently. Triggers at start or end of the pattern. | TV-Composite Video | Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative). | Runt | Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns. | Slew Rate | Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns. | Interval | Triggers on intervals selectable between 1 ns and 20 s. | Dropout | Triggers if signal drops out for longer than selected time between 1 ns and 20 s. | Exclusion Triggering | Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met | Measurement Trigger | Select from a large number of measurement parameters trigger on a measurement value with qualified limits. Can be used as only trigger or last event in a Cascade Trigger. | Multi-Stage: Qualified | Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events. | Multi-Stage: Qualified First | In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events. | Multi-Stage: Cascade (Sequence) Trigger, Capability | Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. | Multi-Stage: Cascade (Sequence) Trigger, Types | Cascade A then B: Edge, Window, Pattern (Logic) Width, Glitch, Interval, Dropout, or Measurement. Measurement can be on Stage B only. Cascade A then B then C (Measurement): Edge, Window, Pattern (Logic), Width, Glitch, Interval, Dropout, or Measurement. Measurement can be on Stage C only. Cascade A then B then C: Edge, Window, Pattern (Logic) | Multi-Stage: Cascade (Sequence) Trigger, Holdoff | Holdoff between A and B or B and C is selectable by time (1ns to 20s) or number of events. Measurement trigger selection as the last stage in a Cascade precludes a holdoff setting between the prior stage and the last stage. | | Low Speed Serial Protocol Trigger (Optional) | Optionally available | I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN1.1, CAN2.0, CAN FD, LIN, FlexRay, MIL-STD-1553, AudioBus (I2S, LJ, RJ, TDM), USB1.x/2.0, SATA | | High Speed Serial Protocol Trigger | Data Rates | (Option HDO9K-80B-8B10B TD) 150 Mb/s - 3.125 Gb/s | Pattern Length | 80 bits, NRZ or 8b10b | Clock Recovery Jitter | 1 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density | Hardware Clock Recovery Loop BW | PLL Loop BW = Fbaud/5500, 100 Mb/s to 2.488 Gb/s (typical) | | Measurement Tools | Measurement Functionality | Display up to 12 measurement parameters together with statistics, including mean, minimum, maximum, standard deviation, and total number. Each occurrence of each parameter is measured and added to the statistics table. Histicons provide a fast, dynamic view of parameters and waveshape characteristics. Parameter math allows addition, subtraction, multiplication, or division of two different parameters. Parameter gates define the location for measurement on the source waveform. | Measurement Parameters - Horizontal | Bit rate, Cycles, Delay, Delta Delay, Duty Cycle, Duration, Frequency, First, Last, Narrow band phase, Narrow band power, Number of points, Period, Width, Phase, Time @ minimum (min.), Time @ maximum (max.), Delta time @ level, Delta time @ level from trigger, X @ max., X @ min.
Cycle-Cycle Jitter, N-Cycle, N-Cycle with start selection, Frequency @ level, Period @ level, Half Period, Width @ level, Time Interval Error @ level, Setup, Hold, Skew, Duty Cycle @ level, Duty Cycle Error, Edge @ lv (counts edges) | Measurement Parameters - Vertical | Amplitude, Base (Low), Level @ x, Maximum, Mean, Median, Minimum, Peak-to-peak, RMS, Std. deviation, Top | Measurement Parameters - Pulse | Area, Fall time (90-10%, 80-20%, @ level), + Overshoot, - Overshoot, Risetime (10-90%, 20-80%, @ level), | Measurement Parameters | Amplitude, Area, Base (Low), Bit rate, Cycles, Delay, Delta Delay, Duty Cycle, Duration, Fall time (90-10%, 80-20%, @ level), Frequency, First, Last, Level @ x, Maximum, Mean, Median, Minimum, Narrow band phase, Narrow band power, Number of points, + Overshoot, - Overshoot, Peak-to-peak, Period, Risetime (10-90%, 20-80%, @ level), RMS, Std. deviation, Top, Width, Phase, Time @ minimum (min.), Time @ maximum (max.), Delta time @ level, Delta time @ level from trigger, X @ max., X @ min.
Cycle-Cycle Jitter, N-Cycle, N-Cycle with start selection, Frequency @ level, Period @ level, Half Period, Width @ level, Time Interval Error @ level, Setup, Hold, Skew, Duty Cycle @ level, Duty Cycle Error, Edge @ lv (counts edges) | | Math Tools | Math Functionality | Display up to 12 math functions traces (F1-F12). The easy-to-use graphical interface simplifies setup of up to two operations on each function trace, and function traces can be chained together to perform math-on-math. | Math Operators - Basic Math | Average (summed), Average (continuous), Difference (-), Envelope, Floor, Product (x), Roof, Sum (+) | Math Operators - Filters | Enhanced resolution (to 11 bits vertical), Interpolate (cubic, quadratic, sinx/x), (SINx)/x | Math Operators - Frequency Analysis | FFT (power spectrum, magnitude, phase, power density, real, imaginary, magnitude squared, up to 128 Mpts and rectangular, VonHann, Hamming, FlatTop and Blackman Harris windows) | Math Operators - Functions | Absolute value, Correlation (two waveforms), Derivative, Deskew (resample), Exp (base e), Exp (base 10), Integral,Invert (negate), Log (base e), Log (base 10), Reciprocal, Rescale (with units), Square, Square root, Zoom (identity) | Math Operators - Other | Sparse | | Measurement and Math Integration | Measurement and Math Integration | Histograms to display statistical distributions of up to 2 billion measurement parameters. Trend (datalog) of up to 1 million measurement parameters. Track (display parameter vs. time, time-correlated to acquisitions) any parameter. Persistence histogram and persistence trace (mean, range, sigma) | | Pass/Fail Testing | Test Types | Parameter limit testing, mask testing. Pass/Fail Actions include: Save, Stop, Alarm, Pulse, Hardcopy, LabNotebook | | Display System | Size | Color 15.4" widescreen capacitive touch screen | Resolution | WXGA; 1280 x 800 pixels. | Number of traces | Display a maximum of 16 traces. Simultaneously display channel, zoom, memory and math traces. | Grid Styles | Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y, Tandem, Quatro, Twelve, Sixteen | Waveform Representation | Sample dots joined, or sample dots only | | Integrated Second Display | Size | Supports touch screen integration of user-supplied second display with split-grid capability. (Note: touch screen driver for second display may not be a Fujitsu driver) | Type | Supports touch screen integration of user-supplied second display with split-grid capability. (Note: touch screen driver for second display may not be a Fujitsu driver) | | Persistence Display | Analog and Color-Graded Persistence | Variable saturation levels; stores each trace's persistence data in memory | Persistence Types | Select analog, color, or three-dimensional | Trace Selection | Activate persistence on all or any combination of traces | Persistence Aging | Select from 500 ms to infinity | Sweep Display Modes | All accumulated, or all accumulated with last trace highlighted | | Zoom Expansion Traces | Zoom Expansion Traces | Display up to 12 Zoom and 12 Math/Zoom traces | | Internal Waveform Memory | Internal Waveform Memory | 12 active waveform memory traces (M1-M12) store 16 bit/point full length waveforms. Waveforms can be stored to any number of files limited only by the data storage media capacity. | | Setup Storage | Setup Storage | Store to the internal hard drive, over the network, or to a USB-connected peripheral device. | | Automatic Setup | Auto Setup | Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals | Find Vertical Scale | Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range | | Calibration | Auto Calibration | Ensures specified DC and timing accuracy is maintained for 1 year minimum. | | Processor/CPU | Type | IntelR i5-3610 Dual Core, 2.7 GHz (or better) | Processor Memory | 16 GB standard | Operating System | Microsoft WindowsR 7 For Embedded Systems 64Bits | Real Time Clock | Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks. | | Connectivity | Ethernet Port | Supports 10/100/1000BaseT Ethernet interface (RJ45 port) | USB Host Ports | 4 side USB 3.1 Gen1 ports, 2 side USB 2.0 ports, and 1 front USB 2.0 port support Windows compatible devices | USB Device Port | 1 port - USBTMC over USB 3.1 Gen1 | GPIB Port (optional) | Supports IEEE - 488.2 (External) | External Monitor Port | DisplayPort 1.1 (Qty. 2) and DVI-D (Qty. 1) to support customer-supplied external monitor. Includes support for extended desktop operation with WQXGA (2560 x 1600) pixel resolution and split-grid capability on external monitor. Supports touch screen integration of external monitor (Note: external display can not use a Fujitsu touch-screen driver). | Remote Control | Via Windows Automation, or via LeCroy Remote Command Set | Network Communication Standard | VXI-11 or VICP, LXI Class C (v1.2) Compliant | Peripheral Bus | Teldyne LeCroy LBUS standard | | Auxiliary Input | Signal Types | Select External Trigger or External Clock Input on the front panel | Coupling | 50 Ω: DC; 1 MΩ: AC, DC, GND | Max. Input Voltage | 50 Ω: 5 Vrms; 1 MΩ: 250 Vmax (DC + Peak AC ≦ 10 kHz) | | Auxiliary Output | Signal Types | Select from control signals or Off | Output Signal | 500 Hz-1 MHz square wave or DC level; 50 mV-1 V into 1 MΩ | Control Signals | Trigger enabled, trigger out, pass/fail status, fast edge, off | Connector Type | BNC, located on front | | Probes | Probes
| Qty. (4) ÷10 Passive Probes | Probe System | ProBus. Automatically detects and supports a variety of compatible probes | Scale Factors | Automatically or manually selected depending on probe used | Calibration Output | Default is 1kHz square wave, 1Vp-p (typical), output to probe hook. Settable from 500 Hz to 1 MHz square wave; 50 mV to 1.0V. | | Power Requirements | Voltage | 100-240 VAC ±10% at 50/60 Hz ±5%; 110-120 VAC ±10% at 400 Hz ±5%; Automatic AC Voltage Selection | Nominal Power Consumption | 415 W / 415 VA | Max. Power Consumption | 500 W / 500 VA (with all PC peripherals and active probes connected to 4 channels) | | Environmental | Temperature (Operating) | +5 °C to +40 °C | Temperature (Non-Operating) | -20 °C to +60 °C | Humidity (Operating) | 5% to 90% relative humidity (non-condensing) up to +31 °C. Upper limit derates to 50% relative humidity (non-condensing) at +40 °C. | Humidity (Non-Operating) | 5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F | Altitude (Operating) | Up to 3,000 m at or below +30 °C | Altitude (Non-Operating) | Up to 40,000 ft. (12,192 m) | Random Vibration (Operating) | 0.31 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes | Random Vibration (Non-Operating) | 2.4 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes | Functional Shock | 30 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total | | Size and Weight | Dimensions (HWD) | 14.1" H x 17.5" W x 9.5" D (358 x 445 x 242 mm) | Weight | 25.8 lbs. (11.7 kg) | Shipping Weight | 42 lbs. (19.0 kg) | | Certifications | CE Certification UL and cUL Listing | CE Compliant, UL and cUL listed; conforms to UL 61010-1 (3rd Edition), UL 61010-2-030 (1st Edition) CAN/CSA C22.2 No. 61010-1-12 | | Warranty and Service | Warranty and Service | 3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, and calibration services. | |
HDO9304-MS スペック
Vertical - Analog Channels | Analog Bandwidth (Max) | 3 GHz | Analog Bandwidth @ 50 Ω (-3 dB) (ProBus Input) | 3 GHz (≧ 5 mV/div) | Analog Bandwidth @ 1 MΩ (-3 dB) (ProBus Input) | 1 GHz (typical) | Rise Time (10-90%, 50 Ω) | 134 ps (typical) | Rise Time (20-80%, 50 Ω) | 98 ps (typical) | Input Channels | 4 | Vertical Resolution | 10 bits, up to 13.8 bits with Optimized Filtering | Effective Number of Bits (ENOB) | 7.0 bits (typical) | Vertical Noise Floor (1 mV/div) | 160 uV | Vertical Noise Floor (2 mV/div) | 160 uV | Vertical Noise Floor (5 mV/div) | 280 uV | Vertical Noise Floor (10 mV/div) | 295 uV | Vertical Noise Floor (50 mV/div) | 743 uV | Vertical Noise Floor (100 mV/div) | 1.28 mV | Vertical Noise Floor (200 mV/div) | 4.53 mV | Vertical Noise Floor (500 mV/div) | 7.36 mV | Vertical Noise Floor (1 V/div) | 13.1 mV | Sensitivity | 50 Ω: 1 mV-1 V/div, fully variable; 1 MΩ: 1 mV-10 V/div, fully variable | DC Vertical Gain Accuracy (Gain Component of DC Accuracy) | ±(1%) F.S, offset at 0 V | Channel-Channel Isolation | DC -2.5 GHz: 40 dB (>100:1), 2.5 GHz to rated BW: 31.6 dB (>30:1) (For any two ProBus input channels, same v/div settings, typical) | Offset Range | 50 Ω BWL≦1 GHz ±1.6 V @ 1 mV - 4.95 mV/div ±4 V @ 5 mV - 9.9 mV/div ±8 V @ 10 mV - 19.8 mV/div ±10 V @ 20 mV - 1V/div BWL>1GHz ±1.4V @ 5 mV - 100 mV/div ±10V @ 102 mV - 1 V/div
1 MΩ ±1.6 V @ 1 mV - 4.95 mV/div ±4 V @ 5 mV - 9.9 mV/div ±8 V @ 10 mV - 19.8 mV/div ±16 V @ 20 mV - 100 mV/div ±80 V @ 102 mV - 1.0 V/div ±160 V @ 1.02 V - 10 V/div | DC Vertical Offset Accuracy | ±(1.5% of offset setting +1% of full scale + 1 mV) (test limit) | Maximum Input Voltage | 50 Ω: 5V RMS ± 10V peak 1 MΩ: 400 V max. (DC + peak AC < 10 kHz) | Input Coupling | 1 MΩ: AC, DC, GND; 50 Ω: DC, GND | Input Impedance | 50 Ω+/-2% or 1 MΩ||17pF, 10 MΩ || 9.5 pF with supplied Probe | Bandwidth Limiters | 20MHz, 200MHz, 500 MHz, 1GHz, 2 GHz | | Horizontal - Analog Channels | Timebases | Internal timebase common to 4 input channels; an external clock may be applied at the EXT input | Time/Division Range | HD1024 on: 20 ps/div - 500 μs/div HD1024 off: 20 ps/div - 6.4 ks/div; RIS available at ≦ 10 ns/div; Roll Mode available at ≧ 100 ms/div and ≦ 5 MS/s | Clock Accuracy | <=1.5 ppm +(aging of 0.5 ppm/yr from last calibration) | Channel-Channel Deskew Range | ±9 x time/div. setting, each channel | External Timebase Reference (Input) | 10MHz +/-25ppm into 50 ohms | External Timebase Reference (Output) | 10MHz, 3.5 dBm +/-1dBm, syncronized to reference being used (internal or external reference) | External Clock | DC to 100 MHz; (50 Ω/1 MΩ), EXT BNC input, Minimum rise time and amplitude requirements apply at low frequencies. | | Acquisition - Analog Channels | Sample Rate (Single-shot) | 20 GS/s on 4 Ch 40 GS/s on 2 Ch | Sample Rate (Repetitive) | 200 GS/s for repetitive signals (20 ps/div to 10 ns/div) | Memory Length (4 Ch / 2 Ch / 1Ch) (Number of Segments) | 64M / 128M / 128M (15,000) | Intersegment Time | 1 μs | Averaging | Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps | Envelope (Extrema) | Envelope, floor, or roof for up to 1 million sweeps | Interpolation | Linear or Sin x/x (2 pt and 4 pt); automatically set when HD1024 is enabled | | Vertical, Horizontal, Acquisition - Digital Channels | Maximum Input Frequency | 250 MHz | Minimum Detectable Pulse Width | 2 ns | Input Channels | 16 Digital channels | Input Impedance (Flying Leads) | 100 kΩ || 5 pF | Input Dynamic Range | ± 20V | Maximum Input Voltage | ±30V Peak | Maximum Input Voltage Swing | 400mV | Threshold Groupings | Pod 2: D15 - D8, Pod 1: D7 - D0 | Threshold Selections | TTL, ECL, CMOS (2.5 V, 3.3 V, 5 V), PECL, LVDS or User Defined | Threshold Accuracy | ±(3% of threshold setting + 100mV) | User Defined Threshold Range | ±10 V in 20 mV steps | User Defined Hysteresis Range | 100 mV to 1.4 V in 100 mV steps | Sample Rate | 1.25 GS/s | Record Length | 128MS - 16 Channels | | Triggering System | Modes | Normal, Auto, Single, and Stop | Sources | Any input channel, Ext, Ext/10, or line; slope and level unique to each source (except line trigger) | Coupling | DC, AC, HFRej, LFRej | Pre-trigger Delay | 0-100% of memory size (adjustable in 1% increments of 100 ns) | Post-trigger Delay | 0-10,000 Divisions in real time mode, limited at slower time/div settings or in roll mode | Trigger Sensitivity with Edge Trigger ProBus Inputs | 2 div @ < 3 GHz 1.5 div @< 1.5 GHz 1 div @ < 200 MHz 0.9 div @<10 MHz (DC, AC, and LFRej coupling, ≧ 10 mV/div, 50 Ω) | External Trigger Sensitivity, (Edge Trigger) | 2 div @ 1 GHz 1.5 div @ < 500 MHz 1 div @ <200 MHz 0.9 div @<10 MHz (DC, AC, and LFRej coupling) | Hold-off | From 2 ns up to 20 s or from 1 to 99,999,999 events | Internal Trigger Level Range | ±4.1 div from center (typical) | External Trigger Level Range | Ext (±0.4 V); Ext/10 (±4 V) | Maximum Trigger Rate | 1,000,000 waveforms/second (in Sequence Mode, up to 4 channels) | Max Trigger Frequency (C1-C4, Aux In, SMART Trigger) | 2.0 GHz @ ≧ 10 mV/div (minimum triggerable width 270 ps) | | Trigger Types | Edge | Triggers when signal meets slope (positive, negative, or either) and level condition. | Width | Triggers on positive or negative glitches with selectable widths. Minimum width 500 ps, maximum width: 20 s | Glitch | Triggers on positive or negative glitches with selectable widths. Minimum width 200 ps, maximum width: 20 s | Window | Triggers when signal exits a window defined by adjustable thresholds | Pattern | Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don't care. The High and Low level can be selected independently. Triggers at start or end of the pattern. | TV-Composite Video | Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative). | Runt | Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns. | Slew Rate | Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns. | Interval | Triggers on intervals selectable between 1 ns and 20 s. | Dropout | Triggers if signal drops out for longer than selected time between 1 ns and 20 s. | Exclusion Triggering | Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met | Measurement Trigger | Select from a large number of measurement parameters trigger on a measurement value with qualified limits. Can be used as only trigger or last event in a Cascade Trigger. | Multi-Stage: Qualified | Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events. | Multi-Stage: Qualified First | In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events. | Multi-Stage: Cascade (Sequence) Trigger, Capability | Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. | Multi-Stage: Cascade (Sequence) Trigger, Types | Cascade A then B: Edge, Window, Pattern (Logic) Width, Glitch, Interval, Dropout, or Measurement. Measurement can be on Stage B only. Cascade A then B then C (Measurement): Edge, Window, Pattern (Logic), Width, Glitch, Interval, Dropout, or Measurement. Measurement can be on Stage C only. Cascade A then B then C: Edge, Window, Pattern (Logic) | Multi-Stage: Cascade (Sequence) Trigger, Holdoff | Holdoff between A and B or B and C is selectable by time (1ns to 20s) or number of events. Measurement trigger selection as the last stage in a Cascade precludes a holdoff setting between the prior stage and the last stage. | | Low Speed Serial Protocol Trigger (Optional) | Optionally available | I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN1.1, CAN2.0, CAN FD, LIN, FlexRay, MIL-STD-1553, AudioBus (I2S, LJ, RJ, TDM), USB1.x/2.0, SATA | | High Speed Serial Protocol Trigger | Data Rates | (Option HDO9K-80B-8B10B TD) 150 Mb/s - 3.125 Gb/s | Pattern Length | 80 bits, NRZ or 8b10b | Clock Recovery Jitter | 1 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density | Hardware Clock Recovery Loop BW | PLL Loop BW = Fbaud/5500, 100 Mb/s to 2.488 Gb/s (typical) | | Measurement Tools | Measurement Functionality | Display up to 12 measurement parameters together with statistics, including mean, minimum, maximum, standard deviation, and total number. Each occurrence of each parameter is measured and added to the statistics table. Histicons provide a fast, dynamic view of parameters and waveshape characteristics. Parameter math allows addition, subtraction, multiplication, or division of two different parameters. Parameter gates define the location for measurement on the source waveform. | Measurement Parameters - Horizontal | Bit rate, Cycles, Delay, Delta Delay, Duty Cycle, Duration, Frequency, First, Last, Narrow band phase, Narrow band power, Number of points, Period, Width, Phase, Time @ minimum (min.), Time @ maximum (max.), Delta time @ level, Delta time @ level from trigger, X @ max., X @ min.
Cycle-Cycle Jitter, N-Cycle, N-Cycle with start selection, Frequency @ level, Period @ level, Half Period, Width @ level, Time Interval Error @ level, Setup, Hold, Skew, Duty Cycle @ level, Duty Cycle Error, Edge @ lv (counts edges) | Measurement Parameters - Vertical | Amplitude, Base (Low), Level @ x, Maximum, Mean, Median, Minimum, Peak-to-peak, RMS, Std. deviation, Top | Measurement Parameters - Pulse | Area, Fall time (90-10%, 80-20%, @ level), + Overshoot, - Overshoot, Risetime (10-90%, 20-80%, @ level), | Measurement Parameters | Amplitude, Area, Base (Low), Bit rate, Cycles, Delay, Delta Delay, Duty Cycle, Duration, Fall time (90-10%, 80-20%, @ level), Frequency, First, Last, Level @ x, Maximum, Mean, Median, Minimum, Narrow band phase, Narrow band power, Number of points, + Overshoot, - Overshoot, Peak-to-peak, Period, Risetime (10-90%, 20-80%, @ level), RMS, Std. deviation, Top, Width, Phase, Time @ minimum (min.), Time @ maximum (max.), Delta time @ level, Delta time @ level from trigger, X @ max., X @ min.
Cycle-Cycle Jitter, N-Cycle, N-Cycle with start selection, Frequency @ level, Period @ level, Half Period, Width @ level, Time Interval Error @ level, Setup, Hold, Skew, Duty Cycle @ level, Duty Cycle Error, Edge @ lv (counts edges) | | Math Tools | Math Functionality | Display up to 12 math functions traces (F1-F12). The easy-to-use graphical interface simplifies setup of up to two operations on each function trace, and function traces can be chained together to perform math-on-math. | Math Operators - Basic Math | Average (summed), Average (continuous), Difference (-), Envelope, Floor, Product (x), Roof, Sum (+) | Math Operators - Filters | Enhanced resolution (to 11 bits vertical), Interpolate (cubic, quadratic, sinx/x), (SINx)/x | Math Operators - Frequency Analysis | FFT (power spectrum, magnitude, phase, power density, real, imaginary, magnitude squared, up to 128 Mpts and rectangular, VonHann, Hamming, FlatTop and Blackman Harris windows) | Math Operators - Functions | Absolute value, Correlation (two waveforms), Derivative, Deskew (resample), Exp (base e), Exp (base 10), Integral,Invert (negate), Log (base e), Log (base 10), Reciprocal, Rescale (with units), Square, Square root, Zoom (identity) | Math Operators - Other | Sparse | | Measurement and Math Integration | Measurement and Math Integration | Histograms to display statistical distributions of up to 2 billion measurement parameters. Trend (datalog) of up to 1 million measurement parameters. Track (display parameter vs. time, time-correlated to acquisitions) any parameter. Persistence histogram and persistence trace (mean, range, sigma) | | Pass/Fail Testing | Test Types | Parameter limit testing, mask testing. Pass/Fail Actions include: Save, Stop, Alarm, Pulse, Hardcopy, LabNotebook | | Display System | Size | Color 15.4" widescreen capacitive touch screen | Resolution | WXGA; 1280 x 800 pixels. | Number of traces | Display a maximum of 16 traces. Simultaneously display channel, zoom, memory and math traces. | Grid Styles | Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y, Tandem, Quatro, Twelve, Sixteen | Waveform Representation | Sample dots joined, or sample dots only | | Integrated Second Display | Size | Supports touch screen integration of user-supplied second display with split-grid capability. (Note: touch screen driver for second display may not be a Fujitsu driver) | Type | Supports touch screen integration of user-supplied second display with split-grid capability. (Note: touch screen driver for second display may not be a Fujitsu driver) | | Persistence Display | Analog and Color-Graded Persistence | Variable saturation levels; stores each trace's persistence data in memory | Persistence Types | Select analog, color, or three-dimensional | Trace Selection | Activate persistence on all or any combination of traces | Persistence Aging | Select from 500 ms to infinity | Sweep Display Modes | All accumulated, or all accumulated with last trace highlighted | | Zoom Expansion Traces | Zoom Expansion Traces | Display up to 12 Zoom and 12 Math/Zoom traces | | Internal Waveform Memory | Internal Waveform Memory | 12 active waveform memory traces (M1-M12) store 16 bit/point full length waveforms. Waveforms can be stored to any number of files limited only by the data storage media capacity. | | Setup Storage | Setup Storage | Store to the internal hard drive, over the network, or to a USB-connected peripheral device. | | Automatic Setup | Auto Setup | Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals | Find Vertical Scale | Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range | | Calibration | Auto Calibration | Ensures specified DC and timing accuracy is maintained for 1 year minimum. | | Processor/CPU | Type | IntelR i5-3610 Dual Core, 2.7 GHz (or better) | Processor Memory | 16 GB standard | Operating System | Microsoft WindowsR 7 For Embedded Systems 64Bits | Real Time Clock | Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks. | | Connectivity | Ethernet Port | Supports 10/100/1000BaseT Ethernet interface (RJ45 port) | USB Host Ports | 4 side USB 3.1 Gen1 ports, 2 side USB 2.0 ports, and 1 front USB 2.0 port support Windows compatible devices | USB Device Port | 1 port - USBTMC over USB 3.1 Gen1 | GPIB Port (optional) | Supports IEEE - 488.2 (External) | External Monitor Port | DisplayPort 1.1 (Qty. 2) and DVI-D (Qty. 1) to support customer-supplied external monitor. Includes support for extended desktop operation with WQXGA (2560 x 1600) pixel resolution and split-grid capability on external monitor. Supports touch screen integration of external monitor (Note: external display can not use a Fujitsu touch-screen driver). | Remote Control | Via Windows Automation, or via LeCroy Remote Command Set | Network Communication Standard | VXI-11 or VICP, LXI Class C (v1.2) Compliant | Peripheral Bus | Teldyne LeCroy LBUS standard | | Auxiliary Input | Signal Types | Select External Trigger or External Clock Input on the front panel | Coupling | 50 Ω: DC; 1 MΩ: AC, DC, GND | Max. Input Voltage | 50 Ω: 5 Vrms; 1 MΩ: 250 Vmax (DC + Peak AC ≦ 10 kHz) | | Auxiliary Output | Signal Types | Select from control signals or Off | Output Signal | 500 Hz-1 MHz square wave or DC level; 50 mV-1 V into 1 MΩ | Control Signals | Trigger enabled, trigger out, pass/fail status, fast edge, off | Connector Type | BNC, located on front | | Probes | Probes
| Qty. (4) ÷10 Passive Probes | Probe System | ProBus. Automatically detects and supports a variety of compatible probes | Scale Factors | Automatically or manually selected depending on probe used | Calibration Output | Default is 1kHz square wave, 1Vp-p (typical), output to probe hook. Settable from 500 Hz to 1 MHz square wave; 50 mV to 1.0V. | | Power Requirements | Voltage | 100-240 VAC ±10% at 50/60 Hz ±5%; 110-120 VAC ±10% at 400 Hz ±5%; Automatic AC Voltage Selection | Nominal Power Consumption | 415 W / 415 VA | Max. Power Consumption | 500 W / 500 VA (with all PC peripherals and active probes connected to 4 channels) | | Environmental | Temperature (Operating) | +5 °C to +40 °C | Temperature (Non-Operating) | -20 °C to +60 °C | Humidity (Operating) | 5% to 90% relative humidity (non-condensing) up to +31 °C. Upper limit derates to 50% relative humidity (non-condensing) at +40 °C. | Humidity (Non-Operating) | 5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F | Altitude (Operating) | Up to 3,000 m at or below +30 °C | Altitude (Non-Operating) | Up to 40,000 ft. (12,192 m) | Random Vibration (Operating) | 0.31 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes | Random Vibration (Non-Operating) | 2.4 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes | Functional Shock | 30 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total | | Size and Weight | Dimensions (HWD) | 14.1" H x 17.5" W x 9.5" D (358 x 445 x 242 mm) | Weight | 25.8 lbs. (11.7 kg) | Shipping Weight | 42 lbs. (19.0 kg) | | Certifications | CE Certification UL and cUL Listing | CE Compliant, UL and cUL listed; conforms to UL 61010-1 (3rd Edition), UL 61010-2-030 (1st Edition) CAN/CSA C22.2 No. 61010-1-12 | | Warranty and Service | Warranty and Service | 3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, and calibration services. | |
HDO9404-MS スペック
Vertical - Analog Channels | Analog Bandwidth (Max) | 4 GHz | Analog Bandwidth @ 50 Ω (-3 dB) (ProBus Input) | 4 GHz (≧ 5 mV/div) | Analog Bandwidth @ 1 MΩ (-3 dB) (ProBus Input) | 1 GHz (typical) | Rise Time (10-90%, 50 Ω) | 100 ps (typical) | Rise Time (20-80%, 50 Ω) | 75 ps (typical) | Input Channels | 4 | Vertical Resolution | 10 bits, up to 13.8 bits with Optimized Filtering | Effective Number of Bits (ENOB) | 6.8 bits (typical) | Vertical Noise Floor (1 mV/div) | 160 uV | Vertical Noise Floor (2 mV/div) | 160 uV | Vertical Noise Floor (5 mV/div) | 317 uV | Vertical Noise Floor (10 mV/div) | 342 uV | Vertical Noise Floor (50 mV/div) | 859 uV | Vertical Noise Floor (100 mV/div) | 1.48 mV | Vertical Noise Floor (200 mV/div) | 5.15 mV | Vertical Noise Floor (500 mV/div) | 8.37 mV | Vertical Noise Floor (1 V/div) | 14.9 mV | Sensitivity | 50 Ω: 1 mV-1 V/div, fully variable; 1 MΩ: 1 mV-10 V/div, fully variable | DC Vertical Gain Accuracy (Gain Component of DC Accuracy) | ±(1%) F.S, offset at 0 V | Channel-Channel Isolation | DC -2.5 GHz: 40 dB (>100:1), 2.5 GHz to rated BW: 31.6 dB (>30:1) (For any two ProBus input channels, same v/div settings, typical) | Offset Range | 50 Ω BWL≦1 GHz ±1.6 V @ 1 mV - 4.95 mV/div ±4 V @ 5 mV - 9.9 mV/div ±8 V @ 10 mV - 19.8 mV/div ±10 V @ 20 mV - 1V/div BWL>1GHz ±1.4V @ 5 mV - 100 mV/div ±10V @ 102 mV - 1 V/div
1 MΩ ±1.6 V @ 1 mV - 4.95 mV/div ±4 V @ 5 mV - 9.9 mV/div ±8 V @ 10 mV - 19.8 mV/div ±16 V @ 20 mV - 100 mV/div ±80 V @ 102 mV - 1.0 V/div ±160 V @ 1.02 V - 10 V/div | DC Vertical Offset Accuracy | ±(1.5% of offset setting +1% of full scale + 1 mV) (test limit) | Maximum Input Voltage | 50 Ω: 5V RMS ± 10V peak 1 MΩ: 400 V max. (DC + peak AC < 10 kHz) | Input Coupling | 1 MΩ: AC, DC, GND; 50 Ω: DC, GND | Input Impedance | 50 Ω+/-2% or 1 MΩ||17pF, 10 MΩ || 9.5 pF with supplied Probe | Bandwidth Limiters | 20MHz, 200MHz, 500 MHz, 1GHz, 2 GHz, 3 GHz | | Horizontal - Analog Channels | Timebases | Internal timebase common to 4 input channels; an external clock may be applied at the EXT input | Time/Division Range | HD1024 on: 20 ps/div - 500 μs/div HD1024 off: 20 ps/div - 6.4 ks/div; RIS available at ≦ 10 ns/div; Roll Mode available at ≧ 100 ms/div and ≦ 5 MS/s | Clock Accuracy | <=1.5 ppm +(aging of 0.5 ppm/yr from last calibration) | Channel-Channel Deskew Range | ±9 x time/div. setting, each channel | External Timebase Reference (Input) | 10MHz +/-25ppm into 50 ohms | External Timebase Reference (Output) | 10MHz, 3.5 dBm +/-1dBm, syncronized to reference being used (internal or external reference) | External Clock | DC to 100 MHz; (50 Ω/1 MΩ), EXT BNC input, Minimum rise time and amplitude requirements apply at low frequencies. | | Acquisition - Analog Channels | Sample Rate (Single-shot) | 20 GS/s on 4 Ch 40 GS/s on 2 Ch | Sample Rate (Repetitive) | 200 GS/s for repetitive signals (20 ps/div to 10 ns/div) | Memory Length (4 Ch / 2 Ch / 1Ch) (Number of Segments) | 64M / 128M / 128M (15,000) | Intersegment Time | 1 μs | Averaging | Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps | Envelope (Extrema) | Envelope, floor, or roof for up to 1 million sweeps | Interpolation | Linear or Sin x/x (2 pt and 4 pt); automatically set when HD1024 is enabled | | Vertical, Horizontal, Acquisition - Digital Channels | Maximum Input Frequency | 250 MHz | Minimum Detectable Pulse Width | 2 ns | Input Channels | 16 Digital channels | Input Impedance (Flying Leads) | 100 kΩ || 5 pF | Input Dynamic Range | ± 20V | Maximum Input Voltage | ±30V Peak | Maximum Input Voltage Swing | 400mV | Threshold Groupings | Pod 2: D15 - D8, Pod 1: D7 - D0 | Threshold Selections | TTL, ECL, CMOS (2.5 V, 3.3 V, 5 V), PECL, LVDS or User Defined | Threshold Accuracy | ±(3% of threshold setting + 100mV) | User Defined Threshold Range | ±10 V in 20 mV steps | User Defined Hysteresis Range | 100 mV to 1.4 V in 100 mV steps | Sample Rate | 1.25 GS/s | Record Length | 128MS - 16 Channels | | Triggering System | Modes | Normal, Auto, Single, and Stop | Sources | Any input channel, Ext, Ext/10, or line; slope and level unique to each source (except line trigger) | Coupling | DC, AC, HFRej, LFRej | Pre-trigger Delay | 0-100% of memory size (adjustable in 1% increments of 100 ns) | Post-trigger Delay | 0-10,000 Divisions in real time mode, limited at slower time/div settings or in roll mode | Trigger Sensitivity with Edge Trigger ProBus Inputs | 2 div @ < 4 GHz 1.5 div @< 2 GHz 1 div @ < 200 MHz 0.9 div @<10 MHz (DC, AC, and LFRej coupling, ≧ 10 mV/div, 50 Ω) | External Trigger Sensitivity, (Edge Trigger) | 2 div @ 1 GHz 1.5 div @ < 500 MHz 1 div @ <200 MHz 0.9 div @<10 MHz (DC, AC, and LFRej coupling) | Hold-off | From 2 ns up to 20 s or from 1 to 99,999,999 events | Internal Trigger Level Range | ±4.1 div from center (typical) | External Trigger Level Range | Ext (±0.4 V); Ext/10 (±4 V) | Maximum Trigger Rate | 1,000,000 waveforms/second (in Sequence Mode, up to 4 channels) | Max Trigger Frequency (C1-C4, Aux In, SMART Trigger) | 2.0 GHz @ ≧ 10 mV/div (minimum triggerable width 200 ps) | | Trigger Types | Edge | Triggers when signal meets slope (positive, negative, or either) and level condition. | Width | Triggers on positive or negative glitches with selectable widths. Minimum width 500 ps, maximum width: 20 s | Glitch | Triggers on positive or negative glitches with selectable widths. Minimum width 200 ps, maximum width: 20 s | Window | Triggers when signal exits a window defined by adjustable thresholds | Pattern | Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don't care. The High and Low level can be selected independently. Triggers at start or end of the pattern. | TV-Composite Video | Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative). | Runt | Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns. | Slew Rate | Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns. | Interval | Triggers on intervals selectable between 1 ns and 20 s. | Dropout | Triggers if signal drops out for longer than selected time between 1 ns and 20 s. | Exclusion Triggering | Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met | Measurement Trigger | Select from a large number of measurement parameters trigger on a measurement value with qualified limits. Can be used as only trigger or last event in a Cascade Trigger. | Multi-Stage: Qualified | Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events. | Multi-Stage: Qualified First | In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events. | Multi-Stage: Cascade (Sequence) Trigger, Capability | Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. | Multi-Stage: Cascade (Sequence) Trigger, Types | Cascade A then B: Edge, Window, Pattern (Logic) Width, Glitch, Interval, Dropout, or Measurement. Measurement can be on Stage B only. Cascade A then B then C (Measurement): Edge, Window, Pattern (Logic), Width, Glitch, Interval, Dropout, or Measurement. Measurement can be on Stage C only. Cascade A then B then C: Edge, Window, Pattern (Logic) | Multi-Stage: Cascade (Sequence) Trigger, Holdoff | Holdoff between A and B or B and C is selectable by time (1ns to 20s) or number of events. Measurement trigger selection as the last stage in a Cascade precludes a holdoff setting between the prior stage and the last stage. | | Low Speed Serial Protocol Trigger (Optional) | Optionally available | I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN1.1, CAN2.0, CAN FD, LIN, FlexRay, MIL-STD-1553, AudioBus (I2S, LJ, RJ, TDM), USB1.x/2.0, SATA | | High Speed Serial Protocol Trigger | Data Rates | (Option HDO9K-80B-8B10B TD) 150 Mb/s - 3.125 Gb/s | Pattern Length | 80 bits, NRZ or 8b10b | Clock Recovery Jitter | 1 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density | Hardware Clock Recovery Loop BW | PLL Loop BW = Fbaud/5500, 100 Mb/s to 2.488 Gb/s (typical) | | Measurement Tools | Measurement Functionality | Display up to 12 measurement parameters together with statistics, including mean, minimum, maximum, standard deviation, and total number. Each occurrence of each parameter is measured and added to the statistics table. Histicons provide a fast, dynamic view of parameters and waveshape characteristics. Parameter math allows addition, subtraction, multiplication, or division of two different parameters. Parameter gates define the location for measurement on the source waveform. | Measurement Parameters - Horizontal | Bit rate, Cycles, Delay, Delta Delay, Duty Cycle, Duration, Frequency, First, Last, Narrow band phase, Narrow band power, Number of points, Period, Width, Phase, Time @ minimum (min.), Time @ maximum (max.), Delta time @ level, Delta time @ level from trigger, X @ max., X @ min.
Cycle-Cycle Jitter, N-Cycle, N-Cycle with start selection, Frequency @ level, Period @ level, Half Period, Width @ level, Time Interval Error @ level, Setup, Hold, Skew, Duty Cycle @ level, Duty Cycle Error, Edge @ lv (counts edges) | Measurement Parameters - Vertical | Amplitude, Base (Low), Level @ x, Maximum, Mean, Median, Minimum, Peak-to-peak, RMS, Std. deviation, Top | Measurement Parameters - Pulse | Area, Fall time (90-10%, 80-20%, @ level), + Overshoot, - Overshoot, Risetime (10-90%, 20-80%, @ level), | Measurement Parameters | Amplitude, Area, Base (Low), Bit rate, Cycles, Delay, Delta Delay, Duty Cycle, Duration, Fall time (90-10%, 80-20%, @ level), Frequency, First, Last, Level @ x, Maximum, Mean, Median, Minimum, Narrow band phase, Narrow band power, Number of points, + Overshoot, - Overshoot, Peak-to-peak, Period, Risetime (10-90%, 20-80%, @ level), RMS, Std. deviation, Top, Width, Phase, Time @ minimum (min.), Time @ maximum (max.), Delta time @ level, Delta time @ level from trigger, X @ max., X @ min.
Cycle-Cycle Jitter, N-Cycle, N-Cycle with start selection, Frequency @ level, Period @ level, Half Period, Width @ level, Time Interval Error @ level, Setup, Hold, Skew, Duty Cycle @ level, Duty Cycle Error, Edge @ lv (counts edges) | | Math Tools | Math Functionality | Display up to 12 math functions traces (F1-F12). The easy-to-use graphical interface simplifies setup of up to two operations on each function trace, and function traces can be chained together to perform math-on-math. | Math Operators - Basic Math | Average (summed), Average (continuous), Difference (-), Envelope, Floor, Product (x), Roof, Sum (+) | Math Operators - Filters | Enhanced resolution (to 11 bits vertical), Interpolate (cubic, quadratic, sinx/x), (SINx)/x | Math Operators - Frequency Analysis | FFT (power spectrum, magnitude, phase, power density, real, imaginary, magnitude squared, up to 128 Mpts and rectangular, VonHann, Hamming, FlatTop and Blackman Harris windows) | Math Operators - Functions | Absolute value, Correlation (two waveforms), Derivative, Deskew (resample), Exp (base e), Exp (base 10), Integral,Invert (negate), Log (base e), Log (base 10), Reciprocal, Rescale (with units), Square, Square root, Zoom (identity) | Math Operators - Other | Sparse | | Measurement and Math Integration | Measurement and Math Integration | Histograms to display statistical distributions of up to 2 billion measurement parameters. Trend (datalog) of up to 1 million measurement parameters. Track (display parameter vs. time, time-correlated to acquisitions) any parameter. Persistence histogram and persistence trace (mean, range, sigma) | | Pass/Fail Testing | Test Types | Parameter limit testing, mask testing. Pass/Fail Actions include: Save, Stop, Alarm, Pulse, Hardcopy, LabNotebook | | Display System | Size | Color 15.4" widescreen capacitive touch screen | Resolution | WXGA; 1280 x 800 pixels. | Number of traces | Display a maximum of 16 traces. Simultaneously display channel, zoom, memory and math traces. | Grid Styles | Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y, Tandem, Quatro, Twelve, Sixteen | Waveform Representation | Sample dots joined, or sample dots only | | Integrated Second Display | Size | Supports touch screen integration of user-supplied second display with split-grid capability. (Note: touch screen driver for second display may not be a Fujitsu driver) | Type | Supports touch screen integration of user-supplied second display with split-grid capability. (Note: touch screen driver for second display may not be a Fujitsu driver) | | Persistence Display | Analog and Color-Graded Persistence | Variable saturation levels; stores each trace's persistence data in memory | Persistence Types | Select analog, color, or three-dimensional | Trace Selection | Activate persistence on all or any combination of traces | Persistence Aging | Select from 500 ms to infinity | Sweep Display Modes | All accumulated, or all accumulated with last trace highlighted | | Zoom Expansion Traces | Zoom Expansion Traces | Display up to 12 Zoom and 12 Math/Zoom traces | | Internal Waveform Memory | Internal Waveform Memory | 12 active waveform memory traces (M1-M12) store 16 bit/point full length waveforms. Waveforms can be stored to any number of files limited only by the data storage media capacity. | | Setup Storage | Setup Storage | Store to the internal hard drive, over the network, or to a USB-connected peripheral device. | | Automatic Setup | Auto Setup | Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals | Find Vertical Scale | Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range | | Calibration | Auto Calibration | Ensures specified DC and timing accuracy is maintained for 1 year minimum. | | Processor/CPU | Type | IntelR i5-3610 Dual Core, 2.7 GHz (or better) | Processor Memory | 16 GB standard | Operating System | Microsoft WindowsR 7 For Embedded Systems 64Bits | Real Time Clock | Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks. | | Connectivity | Ethernet Port | Supports 10/100/1000BaseT Ethernet interface (RJ45 port) | USB Host Ports | 4 side USB 3.1 Gen1 ports, 2 side USB 2.0 ports, and 1 front USB 2.0 port support Windows compatible devices | USB Device Port | 1 port - USBTMC over USB 3.1 Gen1 | GPIB Port (optional) | Supports IEEE - 488.2 (External) | External Monitor Port | DisplayPort 1.1 (Qty. 2) and DVI-D (Qty. 1) to support customer-supplied external monitor. Includes support for extended desktop operation with WQXGA (2560 x 1600) pixel resolution and split-grid capability on external monitor. Supports touch screen integration of external monitor (Note: external display can not use a Fujitsu touch-screen driver). | Remote Control | Via Windows Automation, or via LeCroy Remote Command Set | Network Communication Standard | VXI-11 or VICP, LXI Class C (v1.2) Compliant | Peripheral Bus | Teldyne LeCroy LBUS standard | | Auxiliary Input | Signal Types | Select External Trigger or External Clock Input on the front panel | Coupling | 50 Ω: DC; 1 MΩ: AC, DC, GND | Max. Input Voltage | 50 Ω: 5 Vrms; 1 MΩ: 250 Vmax (DC + Peak AC ≦ 10 kHz) | | Auxiliary Output | Signal Types | Select from control signals or Off | Output Signal | 500 Hz-1 MHz square wave or DC level; 50 mV-1 V into 1 MΩ | Control Signals | Trigger enabled, trigger out, pass/fail status, fast edge, off | Connector Type | BNC, located on front | | Probes | Probes
| Qty. (4) ÷10 Passive Probes | Probe System | ProBus. Automatically detects and supports a variety of compatible probes | Scale Factors | Automatically or manually selected depending on probe used | Calibration Output | Default is 1kHz square wave, 1Vp-p (typical), output to probe hook. Settable from 500 Hz to 1 MHz square wave; 50 mV to 1.0V. | | Power Requirements | Voltage | 100-240 VAC ±10% at 50/60 Hz ±5%; 110-120 VAC ±10% at 400 Hz ±5%; Automatic AC Voltage Selection | Nominal Power Consumption | 415 W / 415 VA | Max. Power Consumption | 500 W / 500 VA (with all PC peripherals and active probes connected to 4 channels) | | Environmental | Temperature (Operating) | +5 °C to +40 °C | Temperature (Non-Operating) | -20 °C to +60 °C | Humidity (Operating) | 5% to 90% relative humidity (non-condensing) up to +31 °C. Upper limit derates to 50% relative humidity (non-condensing) at +40 °C. | Humidity (Non-Operating) | 5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F | Altitude (Operating) | Up to 3,000 m at or below +30 °C | Altitude (Non-Operating) | Up to 40,000 ft. (12,192 m) | Random Vibration (Operating) | 0.31 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes | Random Vibration (Non-Operating) | 2.4 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes | Functional Shock | 30 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total | | Size and Weight | Dimensions (HWD) | 14.1" H x 17.5" W x 9.5" D (358 x 445 x 242 mm) | Weight | 25.8 lbs. (11.7 kg) | Shipping Weight | 42 lbs. (19.0 kg) | | Certifications | CE Certification UL and cUL Listing | CE Compliant, UL and cUL listed; conforms to UL 61010-1 (3rd Edition), UL 61010-2-030 (1st Edition) CAN/CSA C22.2 No. 61010-1-12 | | Warranty and Service | Warranty and Service | 3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, and calibration services. | |
ページトップへ
ミックスド・シグナル・オシロスコープ
HDO9000-MSシリーズ
【標準搭載】
- HDO9000シリーズベースモデル
- 16chのロジック機能
- ロジック部
帯域:250MHz、
サンプリング速度:1.25GS/s
メモリ長:50〜125Mpt
主な特徴
- 10ビットADC分解能 (最適化フィルタの適用で最大13.8ビット)
- 帯域幅:1GHz〜4GHz
- 最高サンプリング速度:40GS/s
- 最大メモリ長:128Mポイント
- 15.4インチ・マルチタッチ対応タッチ・スクリーン
- OneTouch MAUI ─タブレット感覚のワンタッチ操作
- 先進のツール群
─ ジッタ/タイミング解析
─ WaveScan – 波形検索
─ LabNotebookドキュメント作成レポート作成
─ ヒストリ・モード - 波形再生
オプション
- シリアル・データ解析、デバッグ、コンプライアンス試験、トリガ/デコード
- 高機能カスタマイズ
- デジタル・フィルタ
- スペクトラム解析
- スイッチング電源、パワー・デバイス解析
デモビデオ(計測方法などを解説)
HDOシリーズの基本的な活用方法を、日本語字幕付きのビデオで解説しています。
HDOシリーズ デモビデオ
ページトップに戻る
HD1024高精度テクノロジ
HD1024高精度テクノロジは、4GHzの帯域において10ビットの垂直分解能を実現します。HDO9000シリーズは、測定条件に従ってA/D変換器の配置を自動的かつ動的に変更し、最適の分解能を提供します。
A/D変換器内部の配置変更
HD1024高精度テクノロジは、A/D変換器の配置を動的に変更し、10ビットの垂直分解能を実現します。測定条件に応じて、A/D変換器の最適な配置が自動的に選ばれ、常に最適な分解能を提供します。
最適化フィルタ
HD1024高精度テクノロジは、最適なフィルタを用いることで、最大13.8ビットまでの分解能を得ることができます。遅いサンプリング速度の条件下では、アンチエリアシング・フィルタが自動的に適用され、帯域外のノイズ・レベルを低減します。さらに、チャンネルごとに手動で帯域制限をかけることで分解能を向上することができます。
15.4インチ大型タッチスクリーン
OneTouch MAUIを搭載したHDO9000シリーズは、一般的な操作がポップアップメニューを開かなくともワンタッチ操作で行えます。それと同時に、15.4インチ高分解能大画面タッチスクリーンの高輝度表示と高速応答がOneTouch MAUIの直感性と効率をさらに高めます。
タブレット感覚の操作性
タブレット端末のように指先で操作することができ、これまで面倒だったチャンネルや波形演算、計測パラメータのコピーや設定をワンタッチで行えるため、評価やデバッグ作業を効率よく行うことができます。
ページトップに戻る
卓越した解析能力
標準搭載される演算機能、計測、デバッグとドキュメント・ツールは卓越した解析能力を提供します。
シリアル・データ・ツール
自動コンプライアンス試験から柔軟で強力なデバッグ・ツールキットまで、幅広いシリアル・データ解析オプションが用意されています。
WaveScan高機能波形検索
WaveScanはハードウェア・トリガでは検出できないイベントを波形の中から検索する強力な解析機能を提供しています。WaveScanには、単一トレースから異常なイベントを検索する機能と、長時間にわたる数多くの捕捉で20種類以上の検索モードを使って一定の条件に一致する信号を検出する機能があります。
スイッチング電源解析(オプション)
HDO9000シリーズは10ビットの高い分解能を活かして、スイッチング電源解析をより詳細に行えます。スイッチング動作を自動的に判定し領域ごとに色分けするので、視覚的に把握できるだけでなく、各領域ごとに損失を計算してターンオン損失/ターンオフ損失および導通損失を示すことができます。
高速ミックスド・シグナル(オプション)
オシロスコープと組み合わせて最大12.5Gb/sサンプリング・レートで18チャンネルまでの高速デジタル入力を追加するオプションです。最大ビットレート6Gb/sまでに対応します。
シリアル・トリガ/デコード(オプション)
多様な規格に従い、シリアル・バスのデバッグ/検証を短時間で行うためのツールをオプションで提供します。プロトコル・トリガはバス上の目的のメッセージをすばやく特定・捕捉し、デコード機能は、プロトコル情報を色分け、重ね書きすることによりデバッグを簡素化します。アナログ入力を使わずにデジタル入力でもシリアル・データのデコードとトリガ機能ができます(HDO9000-MSシリーズのみ)。
ページトップに戻る
クリックで詳細表示されます
ミックスド・シグナル・ソリューション
HDA125-18-LBUS
12.5GS/s高速ミックスド・シグナル・オプション
(18チャンネルQuickLinkリードセット、LBUS接続) |
HDA125-09-LBUS
12.5GS/s高速ミックスド・シグナル・オプション
(9チャンネルQuickLinkリードセット、LBUS接続) |
MS-500
最高500MHz、18ch、帯域ミックスド・シグナル・オプション |
MS-500-36
最高250MHz帯域、36ch、ミックスド・シグナル・オプション |
MS-250
最高250MHz帯域、18ch、ミックスド・シグナル・オプション |
Computer Upgrade
HDO9K-256GB-RSSD
256 GB Removable Solid State Drive option for HDO9000 |
HDO9K-256GB-RSSD-02
Additional 256 GB Solid State Drive for use with RSSD option. |
リモート・コントロール/ネットワーク・オプション
USB2-GPIB
External USB 2.0 to GPIB IEEE 488.2 adapter |
電源解析
トリガ/デコード・オプション
HDO9K-1553 TD
MIL-STD-1553用トリガ・デコード・オプション |
HDO9K-1553 TDME
MIL-STD-1553 Trigger, Decode, Measure/Graph, and Eye Diagram Option for HDO9000 |
HDO9K-80B-8b10b TD
8b10bトリガ/デコード・オプション |
HDO9K-ARINC429BUS DME SYMBOLIC
ARINC 429 Bus Symbolic Decode, Measure/Graph, and Eye Diagram Option for HDO9000 |
HDO9K-ARINC429BUS DSYMBOLIC
ARINC 429 Bus Symbolic Decode option for HDO9000 |
HDO9K-MDIObus D
MDIOデコード・オプション |
HDO9K-AudioBus TD
AudioBus-I2S トリガ・デコード・オプション |
HDO9K-AudioBus TDG
AudioBusトリガ/デコード/グラフ・パッケージ |
HDO9K-CANbus TD
CAN用トリガ/デコード・オプション |
HDO9K-CANbus TDME
CAN FD Trigger, Decode, Measure/Graph, and Eye Diagram Option for HDO9000 |
HDO9K-CANBUS TDME SYMBOLIC
CAN Symbolic Trigger, Decode, and Measure/Graph, and Eye Diagram Option for HDO9000 |
HDO9K-CAN FDbus TD
CAN FD用トリガ/デコード・オプション |
HDO9K-CAN FDbus TDME
CAN FD Trigger, Decode, Measure/Graph, and Eye Diagram Option for HDO9000 |
HDO9K-CAN FDbus TDME SYMBOLIC
CAN FD Symbolic Trigger, Decode, and Measure/Graph, and Eye Diagram Option for HDO9000 |
HDO9K-DigRFV4bus D
DigRF V4デコード・オプション |
HDO9K-DigRF3Gbus D
DigRF 3Gデコード・オプション |
HDO9K-DPHYbus D
MIPI D-PHYデコード・オプション |
HDO9K-DPHYbus DP
MIPI D-PHYデコード物理層試験パッケージ |
HDO9K-EMB TD
Bundle: Includes I2C, SPI, UART-RS232 Trigger and Decode Options for HDO9000 |
HDO9K-EMB TDME
Bundle: Incl. I2C, SPI, UART-RS232 Trigger, Decode, Measure/Graph, and Eye Diagram Opt. for WR 8000 |
HDO9K-ENETbus D
イーサネット・デコード・オプション |
HDO9K-FCbus D
Fiber Channel用デコード・オプション |
HDO9K-FlexrayBus TD
FlexRay用トリガ/デコード・オプション |
HDO9K-FlexRaybus TDMP
FlexRay Trigger, Decode, Measure/Graph and Physical Layer Option for HDO9000 |
HDO9K-I2Cbus TD
I2C用トリガ/デコード・オプション |
HDO9K-I2CBUS TDME
I2C Trigger, Decode, Measure/Graph, and Eye Diagram Option for HDO9000 |
HDO9K-LINbus TD
LIN用トリガ/デコード・オプション |
HDO9K-LINBUS TDME
LIN Trigger, Decode, Measure/Graph, and Eye Diagram Option for HDO9000 |
HDO9K-Manchesterbus D
Manchesterbus用デコード・オプション |
HDO9K-MPHYbus D
MIPI M-PHYデコード・オプション |
HDO9K-MPHYbus DP
MIPI M-PHYデコード・オプション |
HDO9K-NRZbus D
NRZ用デコード・オプション |
HDO9K-PCIebus D
PCI Expressトリガ・デコード・オプション |
HDO9K-ProtoBus MAG
PROTObus MAG シリアル・デバッグ・ツールキット |
HDO9K-ProtoSync
デコード情報とプロトコル・アナライザ同期オプション |
HDO9K-PROTOSYNC-BT
プロトコル解析オプション(Bit Tracer機能付) |
HDO9K-SASbus D
SAS用デコード・オプション |
HDO9K-SATAbus TD
SATA用トリガ・デコード・オプション |
HDO9K-SENTbus D
SENTデコード・オプション |
HDO9K-SpaceWirebus D
SpaceWireデコード・オプション |
HDO9K-SPIbus TD
SPI用トリガ/デコード・オプション |
HDO9K-SPIBUS TDME
SPI Trigger, Decode, Measure/Graph, and Eye Diagram Option for HDO9000 |
HDO9K-UART-RS232bus TD
UART-RS232用トリガ/デコード・オプション |
HDO9K-UART-RS232BUS TDME
UART-RS232 Trigger, Decode, Measure/Graph, and Eye Diagram Option for HDO9000 |
HDO9K-UNIPRObus D
UniProデコード・オプション |
HDO9K-UPG-MPHY-UNIPRObus D
MPHY to UniPro Decoder Software Upgrade MPHY REQUIRED |
HDO9K-USB2-HSICbus D
USB 2.0 HSICデコード・オプション |
HDO9K-USB2bus TD
USB 2.0トリガ・デコード・オプション |
HDO9K-USB2bus TDME
USB 2.0 Trigger, Decode, Measure/Graph, and Eye Diagram Option for HDO9000 |
ジッタ解析パッケージ
デジタル・フィルタ・オプション
コンプライアンス・テスト・オプション
QPHY-BroadR-Reach
BroadR-Reachコンプライアンス・テスト・パッケージ |
QPHY-MOST150
MOST150oコンプライアンス・テスト・パッケージ |
QPHY-MOST50
MOST50eコンプライアンス・テスト・パッケージ |
QPHY-MIPI-DPHY
MIPIコンプライアンス・テスト・オプション |
GRL-USB-PD
GRL USB Power Delivery Compliance Test Software |
HDO9K-DDR2-TOOLKIT
DDR2 and LPDDR2 Debug Toolkit for WaveRunner 6Zi Oscilloscopes |
GRL-USB-PD-C1
GRL USB Type-C Test Controller |
HDO9K-DDR3-TOOLKIT
DDR3, DDR3L, LPDDR3, DDR2, and LPDDR2 Debug Toolkit for WaveRunner 6Zi Oscilloscopes |
HDO9K-UPG-DDR3-TOOLKIT
DDR3, DDR3L, LPDDR3, DDR2, and LPDDR2 Debug Toolkit Upgrade for WaveRunner 6Zi Oscilloscopes |
QPHY-DDR2
DDR2テスト・オプション |
QPHY-DDR3
DDR3テスト・オプション |
QPHY-ENET
イーサネット・テスト・オプション |
QPHY-LPDDR2
QualiPHY Enabled LPDDR2 Compliance Software Option |
HDO9K-UPG-DDR3-TOOLKIT
DDR3, DDR3L, LPDDR3, DDR2, and LPDDR2 Debug Toolkit Upgrade for HDO9000 |
QPHY-USB
USBテスト・オプション |
シリアル・データ解析
その他のソフトウェア・オプション
その他
HDO9k-8CH-SYNCH
HW kit to allow for 8 channel synch capability to combine 2 HDO9000 High Definition Oscilloscopes |
HDO9K-RACK
ラックマウントキット |
HDO9K-Carrycase
HDO9000Carrying Case |
OC1024-A
オシロスコープ用台車
|
OC1021-A
オシロスコープ用台車
|
データストレージ解析
ミックスド・シグナル・アクセサリ
PK400-0
特大型グリッパ・プローブ・セット− 約5mm ピン・ピッチ用、色分けリード線が付いた22個のプローブ からなるセット |
PK400-1
大型グリッパ・プローブ・セット− 約2.54mm ピン・ピッチ用、色分けリード線が付いた10個のプローブ からなるセット |
PK400-2
中型グリッパ・プローブ・セット− 約1.0 mmピン・ピッチ 用、色分けリード線が付いた10個のプローブからなるセット |
PK400-3
小型グリッパ・プローブ・セット− 約0.2 mmピン・ピッチ 用、色分けリード線が付いた10個のプローブからなるセット |
MSO-3M
18 Pin 3M Interface cable MSO-3M (Mates with 3M part number 2520-6002) |
MSO-DLS-18
16" Digital Lead Set, D0-D17 |
MSO-DLS-36
16" Digital Lead Set, D18-D35 |
HDA-DLS-18QL
18 channel QuickLink leadset for HDA125 |
HDA-DLS-09QL
9 channel QuickLink leadset for HDA125 |
テスト・フィクスチャ
|
|
|