PCIe 5.0 EDSFF and OCP NIC 3.0 Host Adapter
Teledyne LeCroy's PCIe 5.0 EDSFF and PCIe 5.0 OCP NIC 3.0 Host Adapter. Provides a quick and simple means for test and debug of Solid State Drives (SSDs) based on PCI Express (PCIe(r)) protocols. They support data rates of 2.5 GT/s, 5.0 GT/s, 8.0 GT/s, 16.0 GT/s and 32GT/s. The host adapter also supports side band signals such as PERST#, WAKE#, CLKREQ# and SMBus (SMBCLK, SMBDAT). The PCIe 5.0 EDSFF Host adapter provides connectivity capability for E1.S, E1.L , E3.x type devices targeted at enterprise systems that use the SFF-TA-1002 multi-lane card edge connector. Also supports PCIe 5.0 OCP NIC 3.0 devices with specialize bracket.
PCIe 5.0 M.2-to-PCIe Host Adapter Card
Teledyne LeCroy’s PCIe 5.0 M.2-to-PCIe host adapter card provides developers with an extremely versatile tool to speed development of new M.2 designs and to troubleshoot existing M.2 issues. Two configurations are offered to support either M-Key or B-Key (both support B-M devices).
PCIe 5.0 U.2 and U.3 Host Adapter Cards
Teledyne LeCroy's Gen5 U.2 and U.3 Host Adapters provide a quick and simple means for test and debug of Solid State Drives (SSDs) based on PCI Express (PCIe) protocols. They support data rates of 2.5 GT/s, 5.0 GT/s, 8.0 GT/s,16.0 GT/s and 32 GT/s. Each host adapter also supports side band signals such as PERST#, WAKE#, CLKREQ# and SMBus (SMBCLK, SMBDAT).
-
G5 U.2 Port A to PCIe G5 x4 Slot Adapter - Port A U.2 x4 Routing 4 lanes of port A from U.2 connector straight to the bottom PCIe CEM edge fingers
-
G5 U.2 Port B to PCIe G5 Slot Adapter - Port B U.2 x2 Routing 2 lanes of port B from U.2 connector to the bottom PCIe CEM edge fingers (lane 0 and lane 1)
-
G5 U.3 Port A to PCIe G5 Slot Adapter - Port A U.3 x4 Routing 4 lanes of port A from U.3 connector straight to the bottom PCIe CEM edge fingers
-
G5 U.3 Port A x2 to PCIe G5 Slot Adapter - Port A U.3 x2 Routing 2 lanes of port A from U.3 connector straight to the bottom PCIe CEM edge fingers (lane 0 and lane 1)
-
G5 U.3 Port B x2 to PCIe G5 Slot Adapter - Port B U.3 x2 Routing 2 lanes of port B from U.3 connector to the bottom PCIe CEM edge fingers (lane 0 and lane 1)
PCIe Gen4 EDSFF Host Adapters
Teledyne LeCroy’s Gen4 EDSFF Host Adapters provide a quick and simple means for test and debug of Solid State Drives (SSDs) based on PCI Express (PCIe®) protocols. They support data rates of 2.5 GT/s, 5.0 GT/s, 8.0 GT/s and 16.0 GT/s. Each host adapter also supports side band signals such as PERST#, WAKE#, CLKREQ# and SMBus (SMBCLK, SMBDAT). The PCIe 4.0 x4 EDSFF Host adapter provides connectivity capability for E1.S or E1.L type devices targeted at enterprise systems that use the SFF-TA-1002 multi-lane card edge connector.
Currently, four form factor devices can be used in the two EDSFF Adapters:
-
E1.S (PE-1002-2-X16Host2-X) Adapter for both the EDSFF 1U short/narrow and EDSFF 1U short/wide form factors as defined in SFF-TA-1006 specification
-
E1.L (PE-1002-2-X16Host-X) Adapter for both the EDSFF 1U long/narrow and EDSFF 1U long/wide form factors as defined in SFF-TA-1007 specification
PCIe 4.0 OCP NIC 3.0 Host Adapter
Teledyne LeCroy’s PCI Express PCIe® 4.0 OCP NIC 3.0 Host adapter allows users to connect a OCP NIC 3.0 device into a PCIe CEM slot. The adapter supports data rates of 2.5 GT/s, 5.0 GT/s, 8.0 GT/s and 16.0 GT/s, side band signals such as PERST#, WAKE# and SMBus (SMBCLK, SMBDAT). The PCIe 4.0 OCP NIC 3.0 adapter supports link widths up to x16.
PCIe 4.0 U.2 and U.3 Host Adapter Cards
Teledyne LeCroy’s Gen4 U.2 and U.3 Host Adapters provide a quick and simple means for test and debug of Solid State Drives (SSDs) based on PCI Express (PCIe) protocols. They support data rates of 2.5 GT/s, 5.0 GT/s, 8.0 GT/s and 16.0 GT/s. Each host adapter also supports side band signals such as PERST#, WAKE#, CLKREQ# and SMBus (SMBCLK, SMBDAT).
-
G4 U.2 Port A to PCIe G4 x4 Slot Adapter- Port A U.2 x4 Routing 4 lanes of port A from U.2 connector straight to the bottom PCIe CEM edge fingers
-
G4 U.2 Port B to PCIe G4 Slot Adapter- Port B U.2 x2 Routing 2 lanes of port B from U.2 connector to the bottom PCIe CEM edge fingers (lane 0 and lane 1)
-
G4 U.3 Port A to PCIe G4 Slot Adapter- Port A U.3 x4 Routing 4 lanes of port A from U.3 connector straight to the bottom PCIe CEM edge fingers
-
G4 U.3 Port A x2 to PCIe G4 Slot Adapter- Port A U.3 x2 Routing 2 lanes of port A from U.3 connector straight to the bottom PCIe CEM edge fingers (lane 0 and lane 1)
-
G4 U.3 Port B x2 to PCIe G4 Slot Adapter- Port B U.3 x2 Routing 2 lanes of port B from U.3 connector to the bottom PCIe CEM edge fingers (lane 0 and lane 1)
PCIe Gen4 OCuLink Cable Adapter
The PCIe® Gen4 OCuLink Cable Adapter is a PCIe half-width CEM form factor plug in card that allows connecting a OCuLink Cable to a standard PCIe slot. To use the adapter simply plug the PCIe OCuLink cable(s) into the adapter and install the adapter into a standard PCIe slot.
PCIe U.2 Dual Port Transposer, Set of 4 transposer adapters
Teledyne LeCroy's U.2 Transposer Adapters allow the user to isolate data traffic from a specific port on a U.2 SSD and send it to a specific port on the host backplane. During testing of dual-port U.2 SSDs (or servers that utilize dual-port U.2 SSDs), this allows individual ports to be tested and any problems which might exist to be isolated to specific ports on the SSD or server backplane.
-
Simple to use for port isolation and test
-
Available in a set of four versions:
-
Host Port A to SSD Port A (Port B blocked)
-
Host Port A to SSD Port B (Port B blocked)
-
Host Port B to SSD Port A (Port A blocked)
-
Host Port B to SSD Port B (Port A blocked)
-
Supports link widths up to x2
-
Supports I2C and PCIe® side band signal connectivity
-
Supports data rates of 2.5 GT/s, 5 GT/s and 8 GT/s (PCIe 3.0 compliant)
-
Supports DP_EN# on/off via switch
-
Provides multiple test points for measurement of active signals
-
Dimensions (L x W x H): 13.5 mm x 69 mm x 18.5 mm (0.53" x 2.73" x 0.73")
-
Displacement of SSD: 12.1 mm (0.47”)
SKU: PE-U2-Dual Port Transposer-X
U.2(SFF-8639)-to-PCIe Adapters with Multi-power Connectors and Test Pad Support
Teledyne LeCroy’s enhanced U.2 (SFF-8639) adapter cards provide developers with extremely versatile tools to speed development of new U.2 (SFF-8639) designs and to troubleshoot existing U.2 (SFF-8639) issues. Features include test points and multiple power connectors to make it easier to test different devices and designs.
Two configurations are provided: one for single-port devices and Port A of dual-port designs; and the second for Port B of dual-port designs.
Key Features:
-
Allows U.2 (SFF-8639) devices to connect to PCI Express slots
-
Two configurations available: Standard version supports single-port devices and Port A of dual port devices, testing for NVMe x4 or x2 or SCSI Express X4 or x2; Port B version supports the second port of dual port drives for NVMe x2 or SCSI Express x2
-
Provides on-board power connectors including 75W ATX, 150W ATX, SATA, and Molex ATX
-
Provides multiple test points to monitor power, clock signals, etc.
-
Supports data rates up to 8 GT/s
-
Supports 2.5" U.2 (SFF-8639) devices in reinforced slot
-
Can be combined with PCIe slot interposer and analyzer to capture and display traffic with full decoding of NVMe and SCSI Express traffic
U.2(SFF-8639)-to-PCIe Adapter
-
Allows U.2 (SFF-8639) devices to connect to PCI Express slots
-
Supports up to x4 PCIe lanes
-
NVMe and SCSI Express at x4 lane widths
-
Supports data rates up to 8 GT/s
-
Supports 2-1/2” U.2 (SFF-8639) devices
U.2 (SFF-8639) x2 Port B to x4 PCI Express Socket Adapter
-
U.2 (SFF-8639) Adapter Datasheet
-
Allows U.2 (SFF-8639) Dual Port devices to connect to PCI Express slots
-
Supports up to x4 PCIe lanes
-
NVMe and SCSI Express Port B x2 lane widths
-
Supports data rates up to 8 GT/s
-
Supports 2-1/2” U.2 (SFF-8639) devices
PCIe M.2-to-PCIe adapter cards
Teledyne LeCroy’s M.2-to-PCIe adapter cards provide developers with extremely versatile tools to speed development of new M.2 designs and to troubleshoot existing M.2 issues. Two configurations are offered to support either M-Key or B-Key (both support B-M devices).
PCIe 3.0 M.2-to-PCIe adapter cards
Teledyne LeCroy’s PCIe 3.0 M.2-to-PCIe adapter cards provide developers with extremely versatile tools to speed development of new M.2 designs and to troubleshoot existing M.2 issues. Two configurations are offered to support either M-Key or B-Key (both support B-M).SMBus is supported on the adapter.
PCIe 4.0 M.2-to-PCIe adapter cards
Teledyne LeCroy’s PCIe 4.0 M.2-to-PCIe host adapter card provides developers with a extremely versatile tool to speed development of new M.2 designs and to troubleshoot existing M.2 issues. Two configurations are offered to support either M-Key or B-Key (both support B-M devices).
PCIe External Cable 3.0 -to-PCIe Adapter
-
Allows PCIe external cable devices to connect directly to standard PCI Express slot
-
Allows direct testing of PCIe® device functions
-
Allows testing of device drivers for new PCIe external cable devices using a standard computer system
-
Supports I2C and PCIe side band signal connectivity
-
Supports data rates of 2.5 GT/s, 5 GT/s and 8 GT/s (PCIe 3.0 compliant)
-
Supports link widths up to x16