PCIe 5.0 technology achieves twice the effective data throughput rate of the PCIe 4.0 standard through a combination of increased data bit rate (16 GT/s moving to 32 GT/s), PCIe 5.0 uses the same encoding as PCIe 4.0 that has proven reliable for data transmission.
With advanced features such as support for PCI Express Spec 5.0, data rates of 2.5, 5, 8, 16, 32 GT/s, lane widths from x1 to x4, and a full 64 GB of trace memory, the Summit T54 Protocol Analyzer provides unmatched capability and flexibility for developers and users of advanced PCI Express products. The Summit T54 is by far the most advanced and sophisticated PCI Express Analyzer available in the market today.
As with other Teledyne LeCroy PCI Express analyzers, the Summit T54 leverages the intuitive and powerful CATC Trace analysis software system, embedding a deep understanding of the PCI Express protocol hierarchy and intricacies. The colorful, intuitive and easy to use graphical display allows you to quickly capture and validate PCI Express product designs. All Teledyne LeCroy PCI Express protocol analyzers employ high-impedance, non-intrusive probing technology, thereby allowing fully unaltered data pass-through.
The Summit T54 also supports Ethernet LAN port as a standard feature. By connecting over a LAN, engineers can operate the system remotely (e.g., install the client software on their desktop systems, and control an analyzer operating in a remote lab). Also, multiple engineers working collaboratively can time-share use of a single analyzer, reducing the need for an additional analyzer for each engineer, and increasing the cost effectiveness of the product.
By leveraging years of experience in protocol analysis tools for emerging markets, Teledyne LeCroy's PCI Express protocol analyzers blend sophisticated functionality with practical features to speed the development of PCI Express IP cores, semiconductors, storage, graphics, servers, workstations, bridges, and switches.
| Name | |
|---|---|
PCIe Gen5 Summit T54 Quick Start | Product Manual |
PCIe Gen4 to Gen5 x4 Straight Conversion Cable Quick Start | Product Manual |
PCIe Gen4 to Gen5 x4 U3 Straight Conversion Cable Quick Start | Product Manual |
PCIe Gen4 to Gen5 x8 Y Conversion Cable Quick Start | Product Manual |
Interposers and probes compatible with the Summit T54
The PCIe 6.0 CEM x4 Interposer supports data rates of 2.5, 5.0, 8.0, 16.0, 32.0 and 64 GT/s and supports link widths of up to x4. New TAP6 acquisition technology from Teledyne LeCroy is making it possible for accurate capture at up to PCIe 6.0 data rates for protocol analysis. This is done by reducing signal integrity issues and enhancing fidelity capabilities for protocol transmission acquisition.
The PCIe 6.0 CEM x8 Interposer supports data rates of 2.5, 5.0, 8.0, 16.0, 32.0 and 64 GT/s and supports link widths of up to x8. New TAP6 acquisition technology from Teledyne LeCroy is making it possible for accurate capture at up to PCIe 6.0 data rates for protocol analysis. This is done by reducing signal integrity issues and enhancing fidelity capabilities for protocol transmission acquisition.
The PCIe 6.0 CEM Interposer with CrossSync PHY support is a powerful and versatile tool for all developers working up to 64GT/s speed in their development projects.
The PCI Express 6.0 EDSFF and OCP Interposers are advanced tools designed for capturing and decoding PCIe traffic between host systems and EDSFF/OCP devices. These interposers support various protocols including NVMe, SOP/PQI, AHCI/PCIe, PCIe, and CXL, and are compatible with multiple EDSFF and OCP form factors. They offer high data rates up to 64.0 GT/s and provide comprehensive protocol analysis capabilities for enterprise and datacenter environments.
Used with Summit™ Protocol Analyzers, the PCIe 6.0 M.2 Interposer enables PCIe bus traffic between a system board or tablet and an M.2 connector on a SSD device to be monitored, captured, and recorded for protocol analysis. The M.2 interposer will support analysis of PCI Express 6.0 and NVM Express (NVMe) Protocols at data rates from 2.5 GT/s up to 64.0 GT/s, and link widths of x1, x2 and x4
The PCIe 5.0 EDSFF Interposers provides connectivity and monitoring capability for E1.S, E1.L or E3.x type devices targeted at enterprise systems that use the SFF-TA-1002 multi-lane card edge connector. The interposer taps all PCIe protocol traffic between the host and EDSFF device or SSD and records it on the Summit PCIe 5.0 protocol analyzer where protocol issues and performance metrics can be further analyzed and debugged.
The PCIe 5.0 M.2 interposer provides connectivity and monitoring capability for M.2 connector based SSD memory modules targeted at thin client devices such as tablets. The interposer supports 30mm x 22mm, 42mm x 22mm, 60mm x 22mm, 80mm x 22mm , and 110mm x 22mm SSD lengths. This interposer optionally supports the CrossSync PHY technology enabling users to see and correlate both the physical and protocol layers in a unified time aligned view.
The PCIe 5.0 MCIO Cable Interposes provides connectivity and monitoring capability for product designs that incorporate card edge connectors or cabled connector assemblies that utilize the MCIO mechanical connector based on the SFF-TA-1016 specification with PCIe 5.0, NVM Express (NVMe) or Compute Express Link (CXL) technologies.
The PCIe 5.0 Teledyne LeCroy Multi-lead probes allow developers using an embedded PCI Express bus in their PCB designs to tap into the signal traces directly and capture of each serial lane, allowing flexibility to connect to any accessible points on the surface of the PCB.
The PCIe 5.0 OCP NIC 3.0 Interposer allows users to connect a Teledyne LeCroy T4/T5 PCIe(r) protocol analyzer between an OCP NIC 3.0 device and an OCP Server System to monitor, capture, record and analyze protocol traffic. The interposer supports data rates of 2.5 GT/s, 5.0 GT/s, 8.0 GT/s, 16.0 and 32 GT/s, side band signals such as PERST#, WAKE# and SMBus (SMBCLK, SMBDAT). The PCIe 5.0 OCP NIC 3.0 Interposer supports link widths up to x16 and single/multi-hosted configurations.
The PCIe 5.0 U.2/ U.3 (SFF-8639) Interposer is a PCIe Storage Interposer that makes it possible to analyze data traffic from PCIe SSD storage devices to PCIe Storage systems using the U.2/U.3 (SFF-8639) connector. It allows x4 NVM Express, x4SCSI Express or x2 SATA Express host interface based SSD traffic to be monitored, captured and recorded. It supports SRIS, CLCKREQ#, SMBus and Dual port mode when used with MultiPort software option.
