Instructions This script writes the decoding information of seqence mode waveforms to csv files in the corresponding folder on "D:\Applications".
Installing the script:
Place in D:\CustomDSO or D:\Scripts (Actual location doesn't matter)
Running the script
Double-click on the file from Windows Explorer
Stopping the script:
Possible user modifications:
You can edit the IP Address to save the decoding of a remote controlled oscilloscope. But then you have to be sure the folder "Applications" with the sub-folders exists on the drive D of the controling PC. Alternatively you can change the path in the script.
Scope setup requirements:
The oscilloscope has to be in Stop mode to read out the data. Math Functions are used to step through the segments. If a protocol has three input traces like SPI, the Math functions F1-F3 are used for decoding.
Compatibility All LeCroy Windows-based oscilloscopes
Environment
VBScript example that can be run from Windows. The Software ActiveDSO has to be installed on the controlling PC or on the oscilloscope, depending on where the script is saved at. |