Sign in to your Teledyne Lecroy account
Teledyne LeCroy has a wide variety of world class probes and amplifiers to complement its product line. From the ZS high impedance active probes to the DH Series Differential High-bandwidth Probes which offers bandwidths up to 30 GHz, Teledyne LeCroy probes and probe accessories provide optimum mechanical connections for signal measurement.
Wide dynamic range, low loading and excellent noise performance. From 200 MHz to 1.5 GHz. Specialty AP033 provides 10x gain and high CMRR.
5 Vp-p dynamic range with ±3 V offset and low noise and loading. Solder-in, browser, QuickLink, Quick Connect, square pin and HiTemp leads/tips.
Up to 30 GHz for serial data, DDR, or other high-speed signals. Standard and high-sensitivity solder-in, HiTemp, and QuickLink for mixed-signal probing.
The ideal probes for lower voltage GaN power conversion measurement with the highest accuracy, best CMRR, and lowest noise. Up to 1 GHz bandwidth.
1 kV, 2 kV and 6 kV CAT safety rated models. Widest differential voltage ranges exceptional CMRR, low noise, 1% gain accuracy.
Ideal for GaN and SiC devices. Highest accuracy, most bandwidth, wide range of voltages, optical isolation.
1 kV to 6 kV ratings. Provide ground-referenced high voltage measurements in a wide range of applications.
1 to 4 GHz models. High signal fidelity and low circuit loading (<1 pF tip capacitance). ±8 V dynamic range, ±12 V offset.
4 GHz bandwidth, ±60 V offset, ±800 mV dynamic range. High DC input impedance and low noise/attenuation. Best solution for probing power rails.
For AC, DC, and impulse current measurements. Utilizes combination of Hall effect and transformer technology. Up to 500A, up to 100 MHz.
10x attenuating with 10 MΩ input resistance. Ideal for low frequency signals.
High bandwidth passive probe for use with 50 Ω inputs. DC to 7.5 GHz with 0.25 pF input C. 10x or 20x attenuation.
Change between the different Teledyne LeCroy Oscilloscope input connections, interface to sensors, and provide interface to 3rd-party probes.
There are a variety of replacement and additional probe parts, tips and accessories.
A range of externally powered Teledyne Test Tools AC/DC Current Probes which can be used with any Oscilloscope with a high-impedance BNC input.
Wide frequency range and small sense coils for maximum flexibility. From 60 to 6000 Amps, as low as 0.1 Hz to as high as 30 MHz.
Externally powered Teledyne Test Tools Low & High Voltage Differential Probes which can be used with any Oscilloscopes with a high impedance BNC input.