Teledyne LeCroy Extends CrossSync™ PHY Technology to USB4® and USB Type-C® Connectors

New software option permits time-correlated viewing and analysis of oscilloscope and protocol analyzer USB4 traces.

Chestnut Ridge, NY, January 24, 2023 – Teledyne LeCroy today announced the extension of their patented CrossSync™ PHY technology to USB4^® signaling over USB Type-C^® connectors. CrossSync PHY enables waveforms from Teledyne LeCroy oscilloscopes to be viewed alongside protocol analyzer traces, with complete time-correlation of electrical and protocol information for easy and powerful validation and root-cause analysis.

USB4 transfers data at higher speeds and delivers more power than previous generations of USB. To accomplish this, USB4 devices undergo negotiation with the host after connection to establish the fastest possible data transfer between the host and the device. The full 40 Gb/s data transfer over a USB Type-C cable is only achieved upon successful completion of a series of link negotiation steps between the host and device. The failure to complete the necessary steps results in link negotiation failures and downgrading of the maximum data transfer speed. These failures are difficult to debug because the failures could be electrical (PHY) related, protocol (Logic) related or a combination of both (PHY-Logic). System integration engineers need to use both oscilloscopes and protocol analyzers together to debug PHY-Logic layer and link negotiation problems. Teledyne LeCroy’s previously released TF-USB-C-HS high-speed test coupon fixture enabled probing of USB signals by both the oscilloscope and protocol analyzer. Now, it is possible to connect the separate information sets from the oscilloscope and the protocol analyzer to a single analysis application, permitting simultaneous assessment of USB-C PHY layer and protocol logic layers.

CrossSync PHY technology enables Teledyne LeCroy’s oscilloscope user interface to be viewed directly alongside the industry-standard Teledyne LeCroy CATC^® protocol trace. The USB4 CrossSync PHY software option permits the oscilloscope and protocol analyzer traces to be triggered, viewed, navigated and analyzed in a time-correlated way unique to Teledyne LeCroy – quickly identifying problems in a live link and speeding time-to-market for new devices.

For more information on Teledyne LeCroy USB Type-C PHY and PHY-Logic layer solutions, visit us at https://teledynelecroy.com/usb-cross-sync-phy.

About Teledyne LeCroy

Teledyne LeCroy is a leading manufacturer of advanced oscilloscopes, protocol analyzers, and other test instruments that verify performance, validate compliance, and debug complex electronic systems quickly and thoroughly. Since its founding in 1964, the Company has focused on incorporating powerful tools into innovative products that enhance "Time-to-Insight". Faster time to insight enables users to rapidly find and fix defects in complex electronic systems, dramatically improving time-to-market for a wide variety of applications and end markets. Teledyne LeCroy is based in Chestnut Ridge, N.Y. For more information, visit Teledyne LeCroy's website at teledynelecroy.com.