CP031

30 Amps, 100 MHz BW Current Probe - AC/DC , 50 Amp Peak Pulse

Current Probes

CP030B - 30A, 50 MHz High Sensitivity Current Probe - AC/DC, 30 A rms, 50 A Peak Pulse, 1.5 meter cable

CP030 - 30A, 50 MHz Current Probe - AC/DC, 30 A rms, 50 A Peak Pulse, 1.5 meter cable Limited Availability

CP030-3M - 30 A, 10 MHz Current Probe - AC/DC, 30 A rms, 50 A Peak Pulse, 3 meter cable Limited Availability

CP030A - 30A, 50 MHz High Sensitivity Current Probe - AC/DC, 30 A rms, 50 A Peak Pulse, 1.5 meter cable Limited Availability

CP031 - 30A, 100 MHz Current Probe - AC/DC, 30 A rms, 50 A Peak Pulse, 1.5 meter cable

CP031A - 30A, 100 MHz High Sensitivity Current Probe - AC/DC, 30 A rms, 50 A Peak Pulse, 1.5 meter cable

CP150B - 150 A, 10 MHz Current Probe - AC/DC, 150 A rms, 500 A Peak Pulse, 2 meter cable

CP150 - 150 A, 10 MHz Current Probe - AC/DC, 150 A rms, 500 A Peak Pulse, 2 meter cable Limited Availability

CP150-6M - 150 A, 5 MHz Current Probe - AC/DC, 150 A rms, 500 A Peak Pulse, 6 meter cable Limited Availability

CP500 - 500 A, 2 MHz Current Probe - AC/DC, 500 A rms, 700 A Peak Pulse, 6 meter cable

CA10 - Programmable Current Sensor to ProBus Adapter for use with third party current sensors

DCS025 - Deskew Calibration Source for Teledyne LeCroy current probes

Current Probes

Teledyne LeCroy current probes are available in a variety of models for a wide range of applications. The full range of Teledyne LeCroy current probes includes models with bandwidths up to 100 MHz, peak currents up to 700 A and sensitivities to 1 mA/div. Teledyne LeCroy current probes are often used in applications such as the design and test of switching power supplies, motor drives, electric vehicles, and uninterruptible power supplies.

CP030B - 30A, 50MHz Current Probe
CP030-3M - 30 A, 10 MHz Current Probe - AC/DC, 30 A rms, 50 A Peak Pulse, 3 meter cable
CP031 - 30A, 100MHz Current Probe
CP150B - 150 A, 10 MHz Current Probe - AC/DC, 150 A rms, 500 A Peak Pulse
CP150-6M - 150 A, 5 MHz Current Probe - AC/DC, 150 A rms, 500 A Peak Pulse, 6 meter cable
CP500 - 500 A, 2 MHz Current Probe - AC/DC, 500 A rms, 700 A Peak Pulse
DCS025 - Deskew Calibration Source for Teledyne LeCroy current probes

Current Sensor Adapter

The CA10 is a programmable and customizable interface device that seamlessly incorporates third party current transducers/transformers with Teledyne LeCroy oscilloscopes or motor drive analyzers. The easy to use interface provides the ability for the CA10 to be programmed to contain the specifications of the current sensor allowing it to automatically correct for the gain or attenuation and display results in Ampere units. This allows the third party device to be recognized and operate as if it were a Teledyne LeCroy probe.

CA10 - Programmable ProBus Current Sensor Adapter for use with third party current sensors

Wide Range of Applications

High Sensitivity

The CP030A and CP031A provide a high sensitivity of 1mA/div. This allows for more precise low current measurements on Teledyne LeCroy oscilloscopes. When used with HDO high definition oscilloscopes with HD4096 technology, users will obtain highly accurate, low current waveforms with unmatched 12-bit resolution for improved debug and analysis.

Fully Integrated

All Teledyne LeCroy current probes are powered through the Teledyne LeCroy ProBus connection and require no additional hardware. Along with providing power, the ProBus connection allows the current probe and oscilloscope to communicate, resulting in current waveforms automatically displayed on screen in Amps, and calculated power traces scaled correctly in Watts. This full integration also allows for the Degauss and Autozero functions to be done directly from the oscilloscope’s user interface.

Deskew Calibration Source

The DSC015 deskew calibration source has both voltage and current time-aligned signals, which enables the precise deskew of voltage and current probes. Most voltage probes along with the CP030, CP030A, CP031, and CP031A are compatible with the DSC015.

Model	Max Continuous Input Current	Max Peak Current	Bandwidth	Minimum Sensitivity	Coupling	Max Conductor Size (diameter)	Interface
CP030	30A	50A	50 MHZ	10mA/div	AC, DC, GND	5mm	Probus, 1MΩ only
CP030A	30A	50A	50 MHZ	1mA/div	AC, DC, GND	5mm	Probus, 1MΩ only
CP031	30A	50A	100 MHZ	10mA/div	AC, DC, GND	5mm	Probus, 1MΩ only
CP031A	30A	50A	100 MHZ	1mA/div	AC, DC, GND	5mm	Probus, 1MΩ only
AP015	30A	50 A	50 MHz	10 mA/div	AC, DC, GND	5 mm	Probus, 1MΩ only
CP150	150 A	500 A	10 MHz	100 mA/div	AC, DC, GND	20 mm	Probus, 1MΩ only
CP500	500 A	700 A	2 MHz	100 mA/div	AC, DC, GND	20 mm	Probus, 1MΩ only

Electrical Characteristics
Bandwidth (Probe Only)	100 MHz
Coupling	AC 1 MΩ, DC 1MΩ, GND
Risetime (typical)	3.5 ns
Max Continuous Input Current	30 A
Max Peak Current (non-continous)	50 A
Minimum Sensitivity	10 mA/div
Amplitude Accuracy	±1% of reading to 30 A ±2% of reading to 50 A
Maximum Circuit Voltage	300 V, CAT I (Insulated Wire)

Environmental and Safety
Operating Temperature	0 °C to 40 °C
Humidity	≤ 80 % relative humidity (non-condensing)
Storage Temperature	-10 °C to 50 °C
Max Altitude	2000 m

Physical Dimensions
Probe Head Dimensions (L x W x H)	175 mm x 18 mm x 40 mm
Cable Length	1.5 m
Maximum Conductor Size	5 mm
Weight	240 g

General Characteristics
Interface	ProBus