Oscilloscope Probes


ProBus Probe Adapter for TekProbe-BNC Probes

    Probe Adapters

TPA10 - TekProbe to ProBus Probe Adapter
CA10 - Programmable Current Sensor to ProBus Adapter for use with third party current sensors
L2.92A-PBUS - 2.92mm to ProBus Adapter with Probe Power and Communication Pass Through
L2.92A-PLINK - 2.92mm to ProLink Adapter with Probe Power and Communication Pass Through
TPA10 TekProbe™ Probe Adapter

Key Features
  • Allows TekProbe interface level II probes to work with any ProBus-equipped Teledyne LeCroy oscilloscope
  • Automatic probe detection
  • Provides all necessary power and offset control to the attached probe
  • Supports probes up to 4 GHz
  • Easy firmware updates
  • Wide variety of probes supported including: Preamplifiers, Current Probes, Single-Ended Active Probes and Differential Active Probes
Leverage Existing Probes

Investing in new probes can be very expensive. With the TPA10, existing TekProbe probes can be used on Teledyne LeCroy oscilloscopes, allowing for easy and affordable access to the latest in oscilloscope technology.

Automatic Probe Detection

Simply plug the TPA10 into any ProBus-equipped Teledyne LeCroy oscilloscope, attach a supported TekProbe interface level II probe,and the oscilloscope will automatically detect which probe is attached.

Wide Variety of Supported Probes

The TPA10 ProBus Probe Adapter supports many popular probes up to 4 GHz including: preamplifiers, current probes, single-ended active probes and differential active probes.

Easy Firmware Updates

The firmware for the TPA10 is included in the oscilloscope software. If an updated firmware version for the TPA10 is available, an “Update Firmware” button will automatically appear on the dialog making updates simple.

Supported Probes

Supported probes include many popular Tektronix probes, preamplifiers, current probes, single-ended active probes and differential active probes, such as the Tektronix ADA400A differential preamplifier, the Tektronix TCP202 and TCP202A current probes, the Tektronix P6205, P6243, P6245, P6241, and P6249 single-ended active probes, and the Tektronix P6246, P6247, P6248, P6250, P6250, P5205, P5205A, P5210, and P5210A differential and high voltage differential active probes.

Electrical Characteristics

Bandwidth 4 GHz (adapter only)
Power Supplies +15V, -15V, +5V, -5V (each 2%)
Offset Voltage ±1V (1%)
Maximum Input Voltage 47 Vpk, 33 Vrms

Environmental and Safety

Operating Temperature Range 0 to 50 °C
Non-operating Temperature Range -40 to +70 °C
Humidity 5% to 95% RH (10 to 40 °C); 5% to 75% (above 40 °C);RH not controlled below 10 °C
Altitude (Operating) 3000 meters maximum

Physical Dimensions

Dimensions (HWD) 31.1 mm x 39 mm x 88.6 mm (1.22" x 1.54" x 3.49")
Weight 119 g (0.26 lb)

WaveSurfer 3000z Oscilloscopes

WaveSurfer 3000z Oscilloscopes
   Learn More
WaveSurfer 4000HD High Definition Oscilloscopes

WaveSurfer HD
   Learn More
HDO4000A High Definition Oscilloscopes

   Learn More
HDO6000A High Definition Oscilloscopes

   Learn More
WaveRunner 8000HD High Definition Oscilloscopes

WaveRunner 8000HD

   Learn More
MDA 8000HD Motor Drive Analyzers

MDA 8000HD Motor Drive Analyzers

   Learn More
WavePro HD Oscilloscopes

WavePro HD Oscilloscopes
   Learn More
WaveMaster / SDA / DDA 8 Zi-B Oscilloscopes

   Learn More